https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB terminal block, nominal current: 32 A, pitch: 7.5 mm, number of positions: 8, connection method: Screw
connection with wire protector, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color: green
The figure shows a 10-position
version of the product
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
High terminal block capacity thanks to rectangular terminal block space
Allows connection of two conductors
The latching on the side enables various numbers of positions to be combined
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356036542
Weight per Piece (excluding packing)
10.770 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
Dimensions
Length [ l ]
13.5 mm
Pitch
7.5 mm
Dimension a
52.5 mm
Width [ w ]
60 mm
09/12/2019 Page 1 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Technical data
Dimensions
Height
9 mm
Height [ h ]
13.1 mm
Solder pin [P]
4.1 mm
Pin spacing
7.5 mm
Hole diameter
1.3 mm
General
Range of articles
PT 2,5/..-V
Insulating material group
I
Rated surge voltage (III/3)
6 kV
Rated surge voltage (III/2)
6 kV
Rated surge voltage (II/2)
6 kV
Rated voltage (III/3)
500 V
Rated voltage (III/2)
800 V
Rated voltage (II/2)
1000 V
Connection in acc. with standard
EN-VDE
Nominal current IN
32 A
Nominal cross section
2.5 mm²
Maximum load current
32 A (current values dependent on no. of pos., dimensioning of printed
circuits, and ambient temperature)
Insulating material
PA
Flammability rating according to UL 94
V0
Internal cylindrical gage
A3
Stripping length
6.5 mm
Number of positions
8
Screw thread
M3
Tightening torque, min
0.45 Nm
Tightening torque max
0.5 Nm
Connection data
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
20
09/12/2019 Page 2 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Technical data
Connection data
Conductor cross section AWG max.
10
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.75 mm² The technical data regarding clamping with ferrules applies only
when using crimping pliers ZA 3. When using ferrules, it is necessary to
take into account possible restrictions regarding nominal voltage.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
1.5 mm² The technical data regarding clamping with ferrules applies only
2 conductors with same cross section, stranded, TWIN ferrules with plastic
when using crimping pliers ZA 3. When using ferrules, it is necessary to
sleeve, max.
take into account possible restrictions regarding nominal voltage.
Standards and Regulations
Connection in acc. with standard
EN-VDE
CUL
Flammability rating according to UL 94
V0
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
09/12/2019 Page 3 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Drilling diagram
09/12/2019 Page 4 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Diagram
Derating diagram for 5 pins;reduction factor=1
Dimensional drawing
Classifications
eCl@ss
eCl@ss 4.0
27260700
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
09/12/2019 Page 5 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Classifications
eCl@ss
eCl@ss 5.1
27261100
eCl@ss 6.0
27261100
eCl@ss 7.0
27440401
eCl@ss 8.0
27440401
eCl@ss 9.0
27440401
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002643
ETIM 5.0
EC002643
ETIM 6.0
EC002643
ETIM 7.0
EC002643
UNSPSC
UNSPSC 6.01
30211801
UNSPSC 7.0901
39121432
UNSPSC 11
34131203
UNSPSC 12.01
39121432
UNSPSC 13.2
39121432
Approvals
Approvals
Approvals
CCA / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / cULus Recognized
Ex Approvals
Approval details
CCA
Nominal voltage UN
750 V
Nominal current IN
32 A
mm²/AWG/kcmil
0.5-4
DE1 34001
09/12/2019 Page 6 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Approvals
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
750 V
Nominal current IN
32 A
mm²/AWG/kcmil
0.5-4
VDE Gutachten mit
Fertigungsüberwachung
DE1-58861
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
750 V
Nominal current IN
32 A
mm²/AWG/kcmil
0.5-4
40029839
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
E60425-20030211
B
C
D
Nominal voltage UN
300 V
150 V
300 V
Nominal current IN
20 A
20 A
10 A
mm²/AWG/kcmil
20-12
20-12
20-12
Accessories
Accessories
Labeled terminal marker
Marker card - SK 7,5/3,8:FORTL.ZAHLEN - 0804455
Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type:
adhesive, for terminal block width: 7.5 mm, lettering field size: 7.5 x 3.8 mm
09/12/2019 Page 7 / 8
https://www.phoenixcontact.com/us/products/1988011
PCB terminal block - PT 2,5/ 8-7,5-V - 1988011
Accessories
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/12/2019 Page 8 / 8
