1991341

https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 24 A, pitch: 5.08 mm, number of positions: 10, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green. The article can be aligned to create different nos. of positions! The figure shows the 4-pos. version Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Extremely small design for the respective conductor cross section  Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918963873 Weight per Piece (excluding packing) 15.200 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length [ l ] 9.5 mm Pitch 5.08 mm 09/12/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Technical data Dimensions Dimension a 45.72 mm Width [ w ] 50.8 mm Height 15 mm Height [ h ] 18.5 mm Solder pin [P] 3.5 mm Hole diameter 1.3 mm General Range of articles MKDSN 2,5 Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 16 A Nominal cross section 2.5 mm² Maximum load current 24 A (with a 2.5 mm² conductor cross section) Insulating material PA Flammability rating according to UL 94 V0 Internal cylindrical gage A3 Stripping length 6.5 mm Number of positions 10 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 09/12/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Technical data Connection data Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 0.75 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.75 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/12/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Drilling diagram 09/12/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Diagram Type: MKDSN 2,5/... 09/12/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 09/12/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Classifications UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / cULus Recognized Ex Approvals Approval details IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5 VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5 EAC      DE1-58859  40018557  B.01742 09/12/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/1991341 PCB terminal block - MKDSN 2,5/10-5,08 - 1991341 Approvals cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D Nominal voltage UN 300 V 300 V Nominal current IN 20 A 10 A mm²/AWG/kcmil 30-12 30-12  E60425-19770427 Accessories Accessories Bridge Insertion bridge - EBP 2- 5 - 1733169 Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2     Labeled terminal marker Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5.08 mm, lettering field size: 5.08 x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     09/12/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/1991341 Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/12/2019   Page 9 / 9