https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Universal terminal block with bolt connection, cross section: 70 ... 240 mm², width: 53 mm, color: gray
The figure shows a combination of
versions UHV 240-AS/AS, UHV 240KH/AS and UHV 240-KH/KH
Your advantages
The UHV ... high-current connectors are available in several versions
Versions are available with a cable lug or direct connection and there is a mixed version of both connection methods
The comprehensive range of accessories, such as the connection rail for cross connection, ensures safe and user-friendly wiring of conductors up to
240 mm²
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918052829
Weight per Piece (excluding packing)
508.300 g
Custom tariff number
85369010
Country of origin
India
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
240 mm²
Color
gray
09/05/2020 Page 1 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Technical data
General
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
II
Maximum power dissipation for nominal condition
13.78 W
Ambient temperature (operation)
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
415 A
Maximum load current
415 A (with 240 mm² conductor cross section)
Nominal voltage UN
1000 V
Open side panel
No
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
240 mm²
Short-time current
28.8 kA
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
2 2
09/05/2020 Page 2 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Technical data
General
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock form
Semi-sinusoidal
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
120 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-40 °C
Dimensions
Length
125 mm
Width
53 mm
Height NS 35/15
58 mm
Connection data
Connection method
Bolt connection
Cable lug connection according to standard
DIN 46234:1980-03
Min. cross section for cable lug connection
25 mm²
Max. cross section for cable lug connection
240 mm²
Hole diameter, min.
17 mm
Bolt diameter
16 mm
Screw thread
M16
Tightening torque, min
30 Nm
Tightening torque max
35 Nm
Cable lug connection according to standard
DIN 46235:1983-07
Min. cross section for cable lug connection
50 mm²
Max. cross section for cable lug connection
240 mm²
Hole diameter, min.
17 mm
Bolt diameter
16 mm
Screw thread
M16
Tightening torque, min
30 Nm
Tightening torque max
35 Nm
Stripping length
The stripping length depends on the specification provided by the cable lug
manufacturer.
Power rail
40 mm x 5 mm
09/05/2020 Page 3 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Technical data
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
09/05/2020 Page 4 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Dimensional drawing
09/05/2020 Page 5 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Dimensional drawing
Pictogram
09/05/2020 Page 6 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Circuit diagram
Schematic diagram
1 = high current connector, AS screw set on both sides
2 = high current connector, terminal sleeve KH on one side, screw set AS on the other side
3 = high current connector, terminal sleeves KH on both sides, for direct cable connection
7 = separating plate
8 = end piece
9 = flat bracket
Classifications
eCl@ss
eCl@ss 10.0.1
27141120
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
09/05/2020 Page 7 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Classifications
eCl@ss
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / RS / EAC
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
C
Nominal voltage UN
600 V
600 V
13631
09/05/2020 Page 8 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Approvals
B
C
Nominal current IN
400 A
400 A
mm²/AWG/kcmil
500
500
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
380 A
380 A
mm²/AWG/kcmil
500
500
FILE E 60425
RS
http://www.rs-head.spb.ru/en/index.php
17.00013.272
EAC
RU CDE.BL08.B.00540
Accessories
Accessories
Bridge
Connection rail - UHV240-VS 2 - 2130677
Connection rail, number of positions: 2, color: silver
Connection rail - UHV240-VS 3 - 2130680
Connection rail, number of positions: 3, color: silver
Connector
09/05/2020 Page 9 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
Ring cable lug - C-RC 25/M16 DIN - 3240104
Ring cable lug, non-insulated, 25 mm², M16
Ring cable lug - C-RC 35/M16 DIN - 3240109
Ring cable lug, non-insulated, 35 mm², M16
Ring cable lug - C-RC 50/M16 DIN - 3240114
Ring cable lug, non-insulated, 50 mm², M16
Ring cable lug - C-RC 150/M16 DIN - 3240130
Ring cable lug, non-insulated, 150 mm², M16
Ring cable lug - C-RC 185/M16 DIN - 3240133
Ring cable lug, non-insulated, 185 mm², M16
09/05/2020 Page 10 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
Ring cable lug - C-RC 240/M16 DIN - 3240136
Ring cable lug, non-insulated, 240 mm², M16
Cover
Covering hood - UHV240-AH - 2130473
Covering hood, length: 137.4 mm, width: 49.8 mm, height: 77 mm, color: gray
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
09/05/2020 Page 11 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
09/05/2020 Page 12 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - E/AL-NS 32 - 1201659
End clamp, for end support of UKH 50 - UKH 240, is pushed onto DIN rail NS 32 and fixed with 2 screws, width: 10 mm,
color: Aluminum
09/05/2020 Page 13 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
End clamp - E/AL-NS 35 - 1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
End clamp - CLIPFIX 15 - 3022263
Snap-on end bracket, to be snapped onto NS 15 DIN rail
Labeled terminal marker
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels:
10
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2
mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
09/05/2020 Page 14 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB10,LGS:U-N - 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual
labels: 48
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual
labels: 36
Mounting material
Insertion profile - UKH 150/240 EP - 3009244
Insertion profile, color: silver
09/05/2020 Page 15 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
Partition plate
Separating plate - UHV -TP2 - 2130415
Separating plate, length: 180.2 mm, width: 2 mm, height: 68.3 mm, color: gray
Terminal marking
Marker card - SBS10:UNBEDRUCKT - 1007248
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, perforated, mounting type: snap into tall marker
groove, snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 6 x 10.1 mm, Number of
individual labels: 250
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field
size: 8.9 x 9.6 mm, Number of individual labels: 36
09/05/2020 Page 16 / 17
https://www.phoenixcontact.com/us/products/2130046
High Current Connectors - UHV240-AS/AS - 2130046
Accessories
Necessary add-on products
Flange cover - UHV -E - 2130428
Flange cover, length: 43.3 mm, width: 5.2 mm, color: gray
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
09/05/2020 Page 17 / 17
