2130240

https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Universal terminal block with bolt connection, cross section: 70 - 240 mm², width: 53 mm, color: gray The illustration shows a combination of versions UHV 240-AS/AS, UHV 240-KH/AS and UHV 240-KH/KH Product Features  The comprehensive range of accessories, such as the connection rail for cross connection, ensures safe and user-friendly wiring of conductors up to 240 mm²  Versions are available with a cable lug or direct connection and there is a mixed version of both connection methods  The UHV ... high-current connectors are available in several versions   Key commercial data Packing unit 11 GTIN Weight per Piece (excluding packing) 444.65 GRM Custom tariff number 85369010 Country of origin India Technical data General Number of levels 1 Number of connections 2 Color gray Insulating material PA-F Inflammability class according to UL 94 HB Maximum load current 415 A (At 240 mm² conductor cross section) 31.10.2013   Page 1 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Technical data General Rated surge voltage 8 kV Pollution degree 3 Surge voltage category III Insulating material group II Connection in acc. with standard IEC 60947-7-1 Nominal current IN 415 A Nominal voltage UN 1000 V Open side panel nein Dimensions Width 53 mm Length 125 mm Height NS 35/15 58 mm Connection data Conductor cross section solid min. 70 mm² Conductor cross section solid max. 240 mm² Conductor cross section AWG/kcmil min. 2/0 Conductor cross section AWG/kcmil max 500 kcmil Conductor cross section stranded min. 70 mm² Conductor cross section stranded max. 240 mm² Min. AWG conductor cross section, stranded 2/0 Max. AWG conductor cross section, stranded 500 kcmil Conductor cross section stranded, with ferrule without plastic sleeve min. 70 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 180 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 70 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 185 mm² 2 conductors with same cross section, solid min. 35 mm² 2 conductors with same cross section, solid max. 95 mm² 2 conductors with same cross section, stranded min. 50 mm² 2 conductors with same cross section, stranded max. 95 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 35 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 50 mm² Min. cross section for cable lug connection 50 mm² Max. cross section for cable lug connection 185 mm² Connection method Bolt connection Stripping length 34 mm 31.10.2013   Page 2 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Technical data Connection data Tightening torque, min 25 Nm Tightening torque max 30 Nm Power rail 40 mm x 5 mm Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals CSA / UL Recognized / GOST / GOST Ex Approvals 31.10.2013   Page 3 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 500 Nominal current IN 400 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 500 Nominal current IN 380 A Nominal voltage UN 600 V GOST  GOST  Accessories Accessories Bridge Connection rail - UHV240-VS 3 - 2130680 Connection rail, Color: silver     31.10.2013   Page 4 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Accessories Connection rail - UHV240-VS 2 - 2130677 Connection rail, Color: silver     Cover Covering hood - UHV240-AH - 2130473 Covering hood, Width: 49.8 mm, Height: 77 mm, Color: gray     End block End clamp - E/AL-NS 32 - 1201659 End clamp, for end support of UKH 50 - UKH 240, is pushed onto DIN rail NS 32 and fixed with 2 screws, width: 10 mm, color: Aluminum     End clamp - E/AL-NS 35 - 1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum     Flange 31.10.2013   Page 5 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Accessories End clamp - UHV -E - 2130428 End clamp, Width: 5.2 mm, Color: gray     Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm     Mounting material Insertion profile - UKH 150/240 EP - 3009244 Insertion profile, Color: silver     31.10.2013   Page 6 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Accessories Mounting rail DIN rail - NS 32 PERF 2000MM - 1201002 G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m     DIN rail - NS 32 UNPERF 2000MM - 1201015 G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m     Partition plate Separating plate - UHV -TP2 - 2130415 Separating plate, Width: 2 mm, Height: 67.5 mm, Color: gray     Socket spanner Tool - VDE-ISS 8 - 1201947 Allen wrench, fully insulated, safety tool in accordance with EN 60900, length: 150 mm, handle width: 110 mm, for all terminal blocks with 10 mm Allen screw     Terminal marking 31.10.2013   Page 7 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Accessories Marker cards - SBS10:UNBEDRUCKT - 1007248 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Perforated, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 10 mm, Lettering field: 6 x 10.1 mm     Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm     Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm     Drawings 31.10.2013   Page 8 / 9 https://www.phoenixcontact.com/us/products/2130240 Feed-through terminal block - UHV240-M16/M16 - 2130240 Circuit diagram Circuit diagram 1 = high current connector, AS screw set on both sides 2 = high current connector, terminal sleeve KH on one side, screw set AS on the other side 3 = high current connector, terminal sleeves KH on both sides, for direct cable connection 7 = separating plate 8 = end piece 9 = flat bracket © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 31.10.2013   Page 9 / 9