2202233

https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB headers, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 12, pitch: 3.45 mm, color: black, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.8 mm Your advantages  For front connection plugs with tool-free, time saving Push-in connection  Suitable for reflow soldering processes  All headers support variable coding Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4055626023083 Weight per Piece (excluding packing) 3.600 g Custom tariff number 85366930 Country of origin Poland Technical data Item properties Brief article description Feed-through header Plug-in system HSC 1,5 Type of contact Male connector Range of articles HSCH 1,5/..-G Pitch 3.45 mm Number of positions 12 07/04/2020   Page 1 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Technical data Item properties Mounting type Wave soldering Pin layout Linear pinning Number of levels 2 Number of connections 12 Number of potentials 12 Electrical parameters Nominal current 8A Nom. voltage 160 V Rated voltage 63 V Rated voltage (III/2) 160 V Rated voltage (II/2) 160 V Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface terminal point (top layer) Tin (2 - 4 µm Sn) Metal surface terminal point (middle layer) Nickel (1.3 - 3 µm Ni) Metal surface contact area (top layer) Tin (2 - 4 µm Sn) Metal surface contact area (middle layer) Nickel (1.3 - 3 µm Ni), Metal surface soldering area (top layer) Tin (2 - 4 µm Sn) Metal surface soldering area (middle layer) Nickel (1.3 - 3 µm Ni) Material data - housing Housing color black (9005) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 16.05 mm 07/04/2020   Page 2 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Technical data Dimensions for the product Width [ w ] 21.9 mm Height [ h ] 17.45 mm Pitch 3.45 mm Height (without solder pin) 13.6 mm Solder pin [P] 3.8 mm Pin spacing 5.30 mm Dimensions for PCB design Hole diameter 1.3 mm Pin spacing 5.30 mm Packaging information Type of packaging Box packaging Pieces per package 50 Denomination packing units Pcs. Outer packaging type Carton General product information Type of note Assembly instruction: Note Refer to the data sheet for the range in the download area. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 55 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve) Termination and connection method Conductor connection test The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force. Test result Test passed Test – repeated connection and release IEC 60999-1:1999-11 Test passed Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 1.5 mm² / solid / > 40 N 07/04/2020   Page 3 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Technical data Pull-out test 1.5 mm² / flexible / > 40 N Mechanical tests according to standard Test specification IEC 61984 Visual examination Test passed IEC 60512-1-1:2002-02 Dimensional test Test passed IEC 60512-1-2:2002-02 Resistance of marking Test passed IEC 60068-2-70:1995-12 Result Test passed Specification IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 5N Withdraw strength per pos. approx. 4N Polarization and coding Test passed IEC 60512-13-5:2006-02 Result Test passed Specification IEC 60512-15-1:2008-05 Test force per pos. 20 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 1.5 mm Minimum clearance - inhomogeneous field (III/2) 1.5 mm Minimum clearance - inhomogeneous field (II/2) 1.5 mm Minimum creepage distance value (III/3) 1.6 mm Minimum creepage distance value (III/2) 1.6 mm Minimum creepage distance value (II/2) 1.6 mm Current carrying capacity / derating curves Specification IEC 61984 Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 5N Withdraw strength per pos. approx. 4N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 2.1 mΩ 07/04/2020   Page 4 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Technical data Durability tests (B) Insertion/withdrawal cycles 25 Contact resistance R2 2.2 mΩ Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV Insulation resistance, neighboring positions > 0,4 TΩ Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 6 Conductor cross section 1.5 mm² Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV 3 3 Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Standards and Regulations Flammability rating according to UL 94 V0 Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The item is intended to be an unencapsulated plug for installation in a housing. • Operate the connector only when it is fully plugged in. Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e 07/04/2020   Page 5 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Technical data Environmental Product Compliance No hazardous substances above threshold values Drawings Diagram Type: HSCP-SP 1,5-1U/ 6 7035 with HSCH 1,5-2U/12 9005 07/04/2020   Page 6 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Dimensional drawing 07/04/2020   Page 7 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Schematic diagram Classifications eCl@ss eCl@ss 10.0.1 27440402 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440402 eCl@ss 8.0 27440402 07/04/2020   Page 8 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Classifications eCl@ss eCl@ss 9.0 27440402 ETIM ETIM 4.0 EC001031 ETIM 5.0 EC002637 ETIM 6.0 EC002637 ETIM 7.0 EC002637 UNSPSC UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals IECEE CB Scheme / VDE Zeichengenehmigung / cULus Recognized / EAC Ex Approvals Approval details IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 320 V Nominal current IN 8A  DE1-58502 07/04/2020   Page 9 / 11 https://www.phoenixcontact.com/us/products/2202233 Feed-through header - HSCH 1,5-2U/12 9005 - 2202233 Approvals  VDE Zeichengenehmigung   http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 320 V Nominal current IN 8A  cULus Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B Nominal voltage UN 150 V Nominal current IN 8A  EAC   40045969    E60425-20150613  B.01687 Accessories Accessories Coding element Coding profile - CP-DMC 1,5 NAT - 1790647 Coding profile, for insertion between the coding ribs of the connector and the header following the reflow soldering process, insulating material, color: natural     Necessary add-on products Printed-circuit board connector - HSCP-SP 1,5-1U6-7035 - 2202234 PCB connector, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 6, pitch: 3.45 mm, connection method: Push-in spring connection, color: light gray, contact surface: Tin, Color of the spring lever: orange     07/04/2020   Page 10 / 11 https://www.phoenixcontact.com/us/products/2202233 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 07/04/2020   Page 11 / 11