2313083

PSI-WL-PLUG-USB/BT Bluetooth USB Adapter INTERFACE Data Sheet 103170_00_en © PHOENIX CONTACT - 03/2007 Description The Bluetooth USB adapter provides an easy wireless connection between devices with a USB interface and other Bluetooth devices. Data connections can be established to third-party devices or to the PSI-WL-RS232-RS485/BT PSI Bluetooth converter, making it easy to access controllers directly for programming or diagnostic purposes. The wireless connection has a range of up to 80 m or more and is based on the international license-free Bluetooth standard. This wireless standard meets high requirements for interference-free data transmission, in particular through the use of the FHSS method (Frequency Hopping Spread Spectrum) with the 2.4 GHz ISM band. The PSI-WL-PLUG-USB/BT adapter is plugged directly into the USB interface, which provides it with a 5 V power supply. With its compact design and integrated antenna, this Bluetooth USB adapter is ideal for mobile, temporary maintenance and diagnostic connections and offers excellent support as a quick and easy addition to the PSI-WL-RS232-RS485/BT PSI Bluetooth converter. If you have any technical problems, which you cannot resolve with the aid of this documentation, please contact us during the usual office hours at: PSI hotline: +49 - (0) 52 35 - 31 98 90 Fax: +49 - (0) 52 35 - 33 09 99 E-mail: interface-service@phoenixcontact.com Make sure you always use the the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. PSI-WL-PLUG-USB/BT Ordering Data PSI Bluetooth USB Adapter Description Type Order No. Pcs./Pck. PSI Bluetooth USB Adapter (Belkin) PSI-WL-PLUG-USB/BT 2313083 1 Type Order No. Pcs./Pck. PSI-WL-RS232-RS485/BT 2708517 1 Documentation Description Type Order No. Pcs./Pck. User manual for PSI-WL Bluetooth interface converter UM EN PSI WL BLUETOOTH 2699723 1 for direct installation on USB type A ports and wireless transmission from USB interfaces Scope of supply: Bluetooth USB adapter, CD with configuration software, documentation and installation instructions PSI Bluetooth Converter Description PSI Bluetooth converter for converting from RS-232/RS-422/RS-485 2-wire to Bluetooth Technical Data Power Supply Supply voltage 5 V DC (directly via the USB interface) Frequency DC Nominal current consumption Send peak 150 mA Receive peak 80 mA Nominal current 100 mA LED indicators Blue LED: steady light when adapter is switched on Configuration System requirements Windows XP (SP2), 2000, 98 SE, ME Mac OS X Version 10.3 or later Configuration interface USB Configuration is via the USB interface using the configuration software supplied. USB Interface Physics USB 2.0 Connection USB type A, male connector Transmit rate Up to 2.1 Mbps Protocols Transparent protocol, including 3964R protocol Bluetooth Interface Physics Bluetooth 2.0 specification + EDR Frequency 2.402 GHz ... 2.480 GHz (ISM band) Channel distance 1 MHz Bandwidth 79 MHz Number of channels 79 Transmission methods Adaptive frequency hopping 1.6 kHz (FHSS) R&TTE device class Class 2 Bluetooth device class Class 1 = 20 dBm (100 mW), maximum Transmission power 20 dBm (100 mW), maximum Range guide values (depending on the application environment) up to 80 dBm 103170_00_en PHOENIX CONTACT 2 PSI-WL-PLUG-USB/BT Bluetooth Interface (Continued) Receiver sensitivity -80 dBm Antenna Internal antenna Bluetooth profile – – – – – – – – – – – – – – – – GAP (Generic Access Profile) SDAP (Service Discovery Application) SPP (Serial Port Profile) DUN (Dial-Up Networking Profile) PAN (Personal Area Network Profile) CIP (Common ISDN Access Profile) HCRP (Hardcopy Cable Replacement Profile) FTP (File Transfer Protocol) OPP (Object Push Profile) HID (Human Interface Device) BIP (Basic Imaging Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) SYNC (Synchronization Profile) Headset (Headset Profile) Fax (Fax Profile) Supported multi-slot packets 1 / 3 / 5 slot packets Operation – ≤ 7 x parallel point-to-point connections – Bluetooth client or Bluetooth server LED indicator/Bluetooth data indicator Blue LED – Steady light: Bluetooth connection established – Flashing: data transmission via Bluetooth Bluetooth security – – – – – 128-bit encryption Password protection Fixed pairing Favorites feature Masking option System Requirements PC - PC-compatible computer, 200 MHz processor, minimum - Memory: 64 MB, minimum, 128 MB recommended - One free USB 1.1 interface - Windows XP (SP2), 2000, 98 SE, ME Macintosh - One free USB 1.1 interface - Mac OS X Version 10.3 or later General Data CE conformity According to EMC Directive 89/336/EC and R&TTE Directive 1999/5/EC RoHS conformity Yes Approvals/wireless licenses Europe ETSI EN 300 826 USA FCC Part 15 Canada RSS-210 Ambient temperature range Operation 0°C ... 70°C Storage -30°C ... +80°C Permissible humidity 5% ... 90% not condensing Dimensions (H x W x D) 8 mm x 18 mm x 58 mm Weight Approx. 7 g Degree of protection IP20 Separate ground levels No 103170_00_en PHOENIX CONTACT 3 PSI-WL-PLUG-USB/BT Conformance With EMC Directive 89/336/EC Electrostatic discharge (ESD) EN 301489-1/EN 61000-4-2 Criterion B 8 kV air discharge 4 kV contact discharge 4 kV indirect discharge Fast transients (burst) EN 61000-4-4 Signal/Power supply Surge current load Not relevant because cable length < 3 m EN 61000-4-5 Signal Not relevant because cable length < 30 m Power supply Immunity to interference Not relevant because cable length < 10 m EN 61000-4-6 Not relevant because cable length < 3 m Conducted interference Electromagnetic HF field EN 301489-1/EN 61000-4-3 Amplitude modulation Criterion A 3 V/m, AM 80%, 1 kHz sine Frequency range 80 MHz - 2 GHz Emitted interference Radiated emission EN 55022 Class B EN 301489-1 V1.5.1 Part 1: General Technical Requirements EN 301489-17 V1.2.1 Part 17: Wireless Systems in the 2.4 GHz and 5-GHz Range Conformance With R&TTE Directive 1999/5/EEC EMI Immunity to interference (electromagnetic compatibility of wireless systems) Safety Protection of personnel with regard to electrical safety EN 60950-1 Health Limitation of exposure of the population to electromagnetic fields EC Gazette 1999/519/EC EC Council recommendation of July 12, 1999 Radio Effective use of the frequency spectrum and prevention of radio interference ETSI EN 300328 V1.2.1, V1.3.1 International Approvals (As At 03/2007) European Union (EU) Austria, Belgium, Czech Republic, Cyprus, Denmark, Estonia, Finland, France1, Germany, Great Britain, Greece, Hungary, Ireland, Italy2, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden. Europe (excluding EU) Iceland, Norway (excluding Spitzbergen), Switzerland North America Canada, USA Middle East Bahrain, Dubai 1. Does not include use outside buildings. The permissible transmission power is limited here to 10 mW. 2. Does not include use outside buildings. A license is required to use the adapter outside buildings. 103170_00_en PHOENIX CONTACT 4 PSI-WL-PLUG-USB/BT Features The Bluetooth USB adapter can be used for a wide range of different applications, for example: – Easy alternative to serial point-to-point cabling – Wireless operation and monitoring for processes – Wireless parameterization, and programming and diagnostic connections The PSI-WL-PLUG-USB/BT Bluetooth USB adapter offers the following performance features in particular: – High-performance Bluetooth interface – Compact design and integrated antenna – Direct connection to the interface – Transmission power 100 mW – Range up to 80 m – Bluetooth access protected by password, fixed device pairing or device access list – User-friendly configuration software – Transmission quality diagnostic and logging options – Adaptive frequency hopping for optimum coexistence with WLAN systems – Parallel point-to-point connections with up to seven devices Application Examples The PSI-WL-PLUG-USB/BT PSI Bluetooth USB adapter is accessed via a second identical device or via the PSI-WL-RS232-RS485/BT PSI Bluetooth converter. Wireless access via third-party devices, which already have an integrated Bluetooth interface, e.g., PDA, notebook or cell phone, is also supported. Point-to-Point Connections Programming Connection Programming connection between a computer with a USB interface and a PLC with an RS-232, RS-422 or RS-485 interface. PSI-WL-RS232RS485/BT Ord.No. 27 08 517 VCC TD ANT RD RES BT SIGNAL SER ERR RS 232 103170A001 Parallel Point-to-Point Connection PSI-WL-RS232RS485/BT Ord.No. 27 08 517 VCC Parallel point-to-point connection with up to seven Bluetooth devices, allowing simultaneous access to a variety of systems (e.g., display and programming systems). TD RD ANT RES BT SIGNAL SER ERR ... RS 232 PSI-WL-RS232RS485/BT Ord.No. 27 08 517 VCC TD RD ANT RES £ 7x BT SIGNAL SER ERR RS 232 PSI-WL-RS232RS485/BT Ord.No. 27 08 517 VCC TD RD ANT RES BT SIGNAL SER ERR RS 232 103170A002 Programming Connection Programming connection between a computer and a PC-based controller with a USB interface. 103170A003 103170_00_en PHOENIX CONTACT 5 PSI-WL-PLUG-USB/BT Multi-Drop Connections One example is a PLC with an RS-232, RS-422 or RS-485 interface. Up to seven Bluetooth slaves can be connected to a Bluetooth master. ... Networking for Automation Components £ 7x PSI-WL-RS232RS485/BT Ord.No. 27 08 517 VCC TD RD ANT RES BT SIGNAL SER ERR RS 232 103170A004 Mobile Network Access Mobile network access via a Bluetooth access point (PAN profile). Up to seven Bluetooth slaves can be connected to a Bluetooth master. ))) FL BLUETHOOTH AP LAN Bluethooth Access Point Ord No.: 27 37 999 ... Ethernet £ 7x 103170A005 © PHOENIX CONTACT 03/2007 103170_00_en PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00 www.phoenixcontact.com 6