https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Modular repeater for electrical isolation and range increase in RS-485 2-wire bus systems up to 500 kbps, 4-way
isolation, rail-mountable, supply 24 V DC
Why buy this product
Data rates of up to 500 kbps (adjustable via DIP switches)
High-quality 4-way isolation between all interfaces
Bit oversampling for reliable detection of sporadic disturbances
Bit retiming for unrestricted cascading of devices
Integrated, connectable termination resistors
Can be combined with PSI-MOS FO converters in a modular way thanks to DIN rail connectors
Approved for use in zone 2
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356098816
Weight per Piece (excluding packing)
226.900 g
Custom tariff number
85176200
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
03/09/2018 Page 1 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Technical data
Dimensions
Width
35 mm
Height
99 mm
Depth
105 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Altitude
≤ 5000 m (For restrictions see manufacturer's declaration)
≤ 2000 m (When used in EX zone 2)
Degree of protection
IP20
Noise immunity
EN 61000-4-2
General
Transmission channels
2 (1/1), TD, RD, half duplex
Bit delay
< 1 bit
Bit distortion, input
max. ± 35 %
Bit distortion, output
< 6.25 %
Electrical isolation
VCC // TBUS // RS-485 (A) // RS-485 (B)
Test voltage data interfaces
1.5 kV
Test voltage data interface/power supply
1.5 kV (50 Hz, 1 min.)
Standards/regulations
DIN EN 50178, DIN EN 60950
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55011
Net weight
240.8 g
Housing material
PA 6.6-FR
Color
green
MTBF
1247 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5
days a week, 8 hours a day))
261 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle
(5 days a week, 12 hours a day))
MTTF
1439 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 %
(5 days a week, 8 hours a day))
717 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25
% (5 days a week, 12 hours a day))
305 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 %
(7 days a week, 24 hours a day))
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X (Please follow the special installation
instructions in the documentation!)
03/09/2018 Page 2 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Technical data
General
UL, USA/Canada
508 recognized
Class I, Zone 2, AEx nA IIC T6
Class I, Zone 2, Ex nA IIC T6 Gc X
Class I, Div. 2, Groups A, B, C, D
Power supply
Nominal supply voltage
24 V DC (With UL approval)
Supply voltage range
18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
Typical current consumption
75 mA (24 V DC )
Serial interface
Interface 1
RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire
Connection method
Pluggable screw connection
File format/coding
UART (11/10 bit switchable; NRZ)
Data direction switching
Automatic control, min. station response time 2 bits
Transmission medium
2-wire twisted pair, shielded
Transmission length
≤ 1200 m (depends on transmission speed, bus system and cable type)
Termination resistor
390 Ω (Can be connected to port A and B)
150 Ω
390 Ω
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Type of test
Free fall in acc. with IEC 60068-2-32
Test result
1m
Type of test
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result
5g, 10...150 Hz, 2.5 h, in XYZ direction
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result
15g, 11 ms period, half-sine shock pulse
Noise emission
EN 55011
Noise immunity
EN 61000-4-2
Free from substances that could impair the application of coating
according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Connection in acc. with standard
CUL
03/09/2018 Page 3 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Technical data
Standards and Regulations
Standards/regulations
EN 61000-4-2
Contact discharge
± 6 kV
Standards/regulations
EN 61000-4-3
Frequency range
80 MHz ... 3 GHz
Standards/regulations
EN 61000-4-4
Comments
Criterion B
Standards/regulations
EN 61000-4-5
Signal
± 1 kV
Standards/regulations
EN 55011
EN 61000-4-6
Designation
Air clearances and creepage distances
Standards/regulations
DIN EN 50178, DIN EN 60950
Shock
15g in all directions in acc. with IEC 60068-2-27
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
508 recognized
Class I, Zone 2, AEx nA IIC T6
Class I, Zone 2, Ex nA IIC T6 Gc X
Class I, Div. 2, Groups A, B, C, D
Noxious gas test
ISA-S71.04-1985 G3 Harsh Group A
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
03/09/2018 Page 4 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Dimensional drawing
Schematic diagram
1
105
2
3
4
35
5
6
7
8
0,6 ... 0,8 Nm
5 ... 7 lb In
99
PSI-REP-RS485W2
Ord.-No. 23 13 096
VCC
TD
RD
PORT A
TERM.
ON
PORT B
TERM.
ON
PORT B
PSI-REP-RS485W2
Ord.-No. 23 13 096
9
10
11
12
PORT A
TERM.
ON
PORT B
TERM.
ON
PORT B
13
VCC
TD
RD
14
15
16
17
Front view
Application drawing
Application drawing
Linear structure
Max. of 30 devices
Star structure
Max. of 30 devices
= Switch on bus termination resistor
= Switch on bus terminating resistor
Line structure
Star structure
03/09/2018 Page 5 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Application drawing
Application drawing
Tree structure
Branch
500 kbps
400m
400m
Max. 31 devices
= Switch on bus terminating resistor
= Switch on bus terminating resistor
Branch/bus segmentation
Tree structure
Block diagram
DC
24V (1)
DC
0V (2)
DC
DC
Port A
gn
DATA
RATE
DIN rail connector
Port B
SHD
SHD
Bus
management
GND
GND
D (B)
D (B)
D (A)
Retiming
gn
D (A)
Retiming
Retiming
ye
390 150 390
390 150 390
24V 0V GND D(B)D(A)
DIN rail connector
03/09/2018 Page 6 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Schematic diagram
RD
1
2
3
4
5
RT
PO M.
R
E
T
ON
6
B
ON
ON
1
2
3
S1...S6
4
5
P
O
R
T
B
6
DIP switches
03/09/2018 Page 7 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Schematic diagram
SHD GND D(B) D(A)
Connecting the cables
Schematic diagram
D
R
B
T
R .
O M
P ER
T N
O
Connecting the cables
03/09/2018 Page 8 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Classifications
eCl@ss
eCl@ss 4.0
27250312
eCl@ss 4.1
27250312
eCl@ss 5.0
27242208
eCl@ss 5.1
27242208
eCl@ss 6.0
27242208
eCl@ss 7.0
27242208
eCl@ss 8.0
19179290
eCl@ss 9.0
19179290
ETIM
ETIM 2.0
EC000698
ETIM 3.0
EC000698
ETIM 4.0
EC000698
ETIM 5.0
EC000310
ETIM 6.0
EC000310
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
43222604
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
UL Listed / cUL Listed / ATEX / cULus Listed
Approval details
03/09/2018 Page 9 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Approvals
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
EAC
EAC-Zulassung
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Adapter
Connection distributor - PSM PTK - 2760623
Passive RS-485 T-distributor, fitted with one 9-pin D-SUB pin strip and two 9-pin D-SUB socket strips
Connection distributor - PSM PTK-4 - 2799364
Passive RS-485 T-distributor, fitted with one 9-pin D-SUB pin strip and five 9-pin D-SUB socket strips
DIN rail connector
03/09/2018 Page 10 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Accessories
Electronic housing - ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - 2709561
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Media converter
FO converters - PSI-MOS-RS485W2/FO 660 E - 2708313
FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K,
Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (FSMA), 660 nm, for polymer/PCF fiber
cable
FO converters - PSI-MOS-RS485W2/FO 850 E - 2708339
FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K,
Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable
(multimode)
FO converters - PSI-MOS-RS485W2/FO1300 E - 2708562
FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K,
MODBUS ...) up to 500 kbps, NRZ coding, termination device with an FO interface (SC-Duplex), 1300 nm, for fiberglass
cable
Mounting material
Components of electronic housing - ME-SAS - 2853899
Shield connection clip for printed circuit terminal block
03/09/2018 Page 11 / 12
https://www.phoenixcontact.com/us/products/2313096
Repeater - PSI-REP-RS485W2 - 2313096
Accessories
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal resistor
Termination resistor - PSI-TERMINATOR-PB-TBUS - 2702636
Active termination resistor for PROFIBUS and RS-485 bus systems, redundant power supply, routing of the supply
voltage via DIN rail connector, electrical isolation, switchable termination, integrated programming interface
DIN rail bus connectors - ME 17,5 TBUS 1,5/PP000-3,81 BK - 2890014
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 2-pos.
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
03/09/2018 Page 12 / 12
