2313449

https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Modular segment coupler for electrical isolation and increasing the range for DeviceNet/SDS/CANopen, data rate of up to 1 Mbps. Different data rates at the interfaces can be configured via software. High-quality electrical isolation between the interfaces, DIN-rail mountable, 24 V DC supply. Your advantages  Data rates of up to 1 Mbps  High-quality 4-way isolation between all interfaces  All connections can be plugged in using a COMBICON screw terminal block  Approved for use in zone 2  Can be combined with PSI-MOS FO converters in a modular way thanks to DIN rail connectors Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356451857 Weight per Piece (excluding packing) 300.000 g Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 35 mm Height 111 mm 09/11/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Technical data Dimensions Depth 121 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 30 % ... 95 % (non-condensing) Degree of protection IP20 Noise immunity EN 61000-6-2 Serial interface Interface 1 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen Operating mode Semi-duplex No. of ports 2 (CAN_High / CAN_Low) Connection method COMBICON plug-in screw terminal block File format/coding Bit stuffing, NRZ Transmission medium 2-wire twisted pair, shielded Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used) Termination resistor Integrated and ready to be switched 124 Ω, integrated and can be connected Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Serial transmission speed ≤ 1000 kbps Interface 2 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen Connection method COMBICON plug-in screw terminal block Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used) Termination resistor 124 Ω, integrated and can be connected Serial transmission speed ≤ 1000 kbps Digital outputs Output name Relay output Number of outputs 1 Contact type N/O contact Minimum switching voltage 10 V DC Maximum switching voltage 30 V DC 09/11/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Technical data Digital outputs Limiting continuous current 500 mA Power supply Nominal supply voltage 24 V DC Supply voltage range 10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) Max. current consumption 80 mA Typical current consumption 55 mA (24 V DC) General Bit distortion, input ± 35 % Bit distortion, output < 6.25 % Electrical isolation according to EN 60950 VCC // CAN A // CAN B Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Noise emission EN 55011 Net weight 234.7 g Housing material PA 6.6-FR Color green MTBF 743 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 163 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) MTTF 949 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day)) 443 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day)) 181 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X (Please follow the special installation instructions in the documentation!) UL, USA/Canada 508 Listed Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Type of test Free fall in acc. with IEC 60068-2-32 Test result 1m Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 Test result 5g, 10...150 Hz, 2.5 h, in XYZ direction Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27 09/11/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Technical data Standards and Regulations Test result 15g, 11 ms period, half-sine shock pulse Noise emission EN 55011 Noise immunity EN 61000-6-2 Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard Standards/regulations EN 61000-4-2 Contact discharge ± 6 kV Standards/regulations EN 61000-4-3 Frequency range 80 MHz ... 3 GHz Standards/regulations EN 61000-4-4 Comments Criterion B Standards/regulations EN 61000-4-5 Signal ± 1 kV Standards/regulations EN 55011 EN 61000-4-6 Designation Air clearances and creepage distances Standards/regulations DIN EN 50178, DIN EN 60950 Electrical isolation according to EN 60950 Shock 15g in all directions in acc. with IEC 60068-2-27 Vibration (operation) in acc. with IEC 60068-2-6: 5g, 150 Hz Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada 508 Listed DNV GL-Temperature B DNV GL-Humidity A DNV GL-Vibration A DNV GL-EMC B DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/11/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Application drawing 09/11/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27240490 eCl@ss 4.1 27240490 eCl@ss 5.0 27242208 eCl@ss 5.1 27242208 eCl@ss 6.0 27242208 eCl@ss 7.0 27242208 eCl@ss 8.0 27242208 eCl@ss 9.0 27242208 ETIM ETIM 3.0 EC000673 ETIM 4.0 EC001423 ETIM 5.0 EC001423 ETIM 6.0 EC001423 UNSPSC UNSPSC 6.01 30211506 09/11/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Classifications UNSPSC UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39122114 Accessories Accessories Data cable by the meter Bus system cable - SAC-5P-920/... - 1511504 ® Bus system cable, CANopen , DeviceNet™, 4-position, PUR halogen-free, violet RAL 4001, shielded, cable length: Free entry (0.5 ... 400 m)     Data plug D-SUB bus connector - SUBCON-PLUS-CAN/90/PG/M12 - 2902322 D-SUB plug, 9-pos., socket, with PG-D-SUB pin, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 90°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.     D-SUB bus connector - SUBCON-PLUS-CAN/90/M12 - 2902323 D-SUB plug, 9-pos., socket, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 90°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.     09/11/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Accessories D-SUB bus connector - SUBCON-PLUS-CAN/35/PG/M12 - 2902324 D-SUB plug, 9-pos., socket, with PG-D-SUB pin, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 35°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.     D-SUB bus connector - SUBCON-PLUS-CAN/35/M12 - 2902325 D-SUB plug, 9-pos., socket, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 35°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.     D-SUB bus connector - SUBCON-PLUS-CAN/AX/M12 - 2902326 D-SUB plug, 9-pos., socket, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 180° (axial). Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.     D-SUB bus connector - SUBCON-PLUS-CAN - 2744694 D-SUB connector, 9-pos. female connector, two cable entries < 35° to one terminal block row, bus system: CAN, ® CANopen , SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7; screw connection terminal blocks     D-SUB bus connector - SUBCON-PLUS-CAN/PG - 2708119 ® D-SUB connector, 9-pos. socket, cable entry < 35°, bus system: CAN, CANopen , SafetyBUS p up to 1 Mbps, with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7, 9; screw terminal blocks     09/11/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/2313449 Segment coupler - PSI-SC-DNET CAN - 2313449 Accessories D-SUB bus connector - SUBCON-PLUS-CAN/AX - 2306566 D-SUB connector, 9-pos. female connector, axial version with two cable entries, bus system: CAN, CANopen, SafetyBUS p; pin assignment: 2, 3, 7; screw connection terminal blocks     DIN rail connector DIN rail bus connectors - ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - 2709561 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/11/2019   Page 9 / 9