2314859

S5/S7 ADAPTER VARIOFACE S5/S7 Adapters for Siemens SIMATIC® S7 INTERFACE Data Sheet 101976_en_05 1 © PHOENIX CONTACT 2010-06-28 Description For systems that are automated with SIMATIC® S5-115 and 135/155, various Phoenix Contact VARIOFACE S5/S7 adapters can be used to connect the existing SIMATIC® S5 field wiring directly to SIMATIC® S7. This saves both time and money. Costly rewiring of individual modules is not required. During downtimes, such as weekends, systems can be tested with SIMATIC® S7 and can also be operated during production times with SIMATIC® S5. Once the changeover is complete, SIMATIC® S7 controls the system via VARIOFACE S5/S7 adapters and the old SIMATIC® S5 field wiring. 2 Table of Contents 1 Description ............................................... 1 2 Table of Contents ..................................... 1 3 Adapters for Converting S5-115 to S7-400 ................................................................. 2 3.1 4 6ES5 420... to 6ES5 465.......................... 2 Adapters for Converting S5-115 to S7-300 ................................................................. 3 4.1 6ES5 420... to 6ES5 451.......................... 3 5 Commissioning adapters for extending the existing S5-115 field wiring....................... 4 6 Adapters for Converting S5-135/155 to S7-400 ................................................................. 5 VARIOFACE S5/S7 adapters ensure safe system operation using modern control systems. 6.1 6.2 6.3 6.4 7 Adapters for Converting S5-135 to S7-300 ................................................................. 9 7.1 8 Make sure you always use the latest documentation. It can be downloaded at www.phoenixcontact.net/catalog. 6ES5 420... to 6ES5 432.......................... 5 6ES5 436... to 6ES5 453.......................... 6 6ES5 454... to 6ES5 460.......................... 7 6ES5 465... to 6ES5 470.......................... 8 6ES5 420... to 6ES5 451.......................... 9 Commissioning adapters for extending the existing S5-135 field wiring .................... 10 S5/S7 ADAPTER 3 Adapters for Converting S5-115 to S7-400 FLKM S115/... adapters provide a direct connection between a SIMATIC® S5 connector wired with individual wires and the SIMATIC® S7-400 base board. The SIMATIC® S5 connector is plugged directly into an S7-400 I/O card with the aid of the FLKM S115/... adapter. A new 3.1 SIMATIC® S7-400 is installed in place of the SIMATIC® S5. The existing field wiring remains intact. Attention: Due to the geometry, it is only possible to use every other slot. The LEDs of the S7-400 module are hidden by the S5-115 adapter. 6ES5 420... to 6ES5 465... Ordering Data Description Type Order No. Pcs./Pck. FLKM S115/S400/SO155 2307248 1 6ES5 454-7LA12 to 6ES7 422 1BH11-0AA0 FLKM S115-454-7LA/S400 2314901 1 Analog IN (current and voltage measurement only) from S5-115 to S7400 FLKM S115-465-7LA/UI/S400 2314914 1 Digital IN and OUT 24 V DC from S5-115 to S7-400 IN 6ES5 420-7LA11 to 6ES7-421-1BL01-0AA0 6ES5 430-7LA11 to 6ES7-421-1BL01-0AA0 OUT 6ES5 441-7LA11 to 6ES7 422-1BL00-0AA0 6ES5 451-7LA11 to 6ES7 422-1BL00-0AA0 Digital OUT 24 V DC from S5-115 to S7-400 6ES5 465-7LA13 to 6ES7 431 0HH00-0AB0 6ES5 465-7LA13 to 6ES7 431 7QH00-0AB0 Technical Data Maximum permissible operating voltage 24 V AC/DC Maximum permissible current (per branch) 4A Maximum permissible current (separate power supply) 4A Test voltage 500 V (50 Hz, 1 min.) Ambient temperature (operation) -20°C ... +50°C Mounting position Vertical Standards/specifications DIN EN 50178/IEC 62103 Connection Schemes FLKM S115/S400/SO155 FLKM S115-465-7LA/UI/S400 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 20 21 22 23 S5-115 1 3 4 5 6 7 8 9 10 11 13 15 16 17 18 19 20 21 22 23 S7-400 25 27 28 29 30 31 32 33 34 35 37 39 40 41 42 43 44 45 46 48 S7-400 1 2 S5-115 25 27 28 29 30 31 32 33 34 35 S5-115 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 L+ L- 37 39 40 41 42 43 44 45 46 47 FLKM S115-454-7LA/S400 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 424344 45 46 47 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S5-115 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 S5-115 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 101976_en_05 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 PHOENIX CONTACT 2 S5/S7 ADAPTER 4 Adapters for Converting S5-115 to S7-300 S5/S7 adapters connect S5-115 front adapters wired with individual wires to S7-300 I/O modules. With the aid of the FLKM S115/S7/FLK50/SO13 converter module, the signals of the S5-115 front adapter can be converted to a 50-pos. strip. 4.1 An FLK 50/EZ-DR/.../KONFEK 50-pos. system cable and a front adapter for SIMATIC® S7-300 (FLKM 50-PA-S300) connect the signals to the I/O module. 6ES5 420... to 6ES5 451... Ordering Data Description Type Order No. Pcs./Pck. FLKM S115/S7/FLK50/PLC/SO137 2306294 1 Digital IN and OUT 24 V DC from S5-115 via converter, system cable, and front adapter to S7-300 IN 6ES5 420-7LA11 to 6ES7 321-1BL00-0AA0 6ES5 430-7LA11 to 6ES7 321-1BL00-0AA0 OUT 6ES5 441-7LA11 to 6ES7 322-1BL00-0AA0 6ES5 451-7LA11 to 6ES7 322-1BL00-0AA0 Technical Data Maximum permissible operating voltage 24 V AC/DC Maximum permissible current (per branch) 1A Maximum permissible current (separate power supply) 2A Test voltage 500 V (50 Hz, 1 min.) Ambient temperature (operation) -20°C ... +50°C Mounting position Any Standards/specifications DIN EN 50178/IEC 62103 Connection Scheme Application Example FLKM S115/S7/FLK50/PLC/SO137 FLK50 1 2 3 4 5 6 7 8 9 10 1112 1314 1516171819202122 2324 S5-115 1 2 3 4 5 6 7 8 9 10 1112 1314 1516171819 202122 23 FLK50 2526 27282930 31323334 3536 3738 394041 4243444546 4748 S5-115 2526 27282930 31323334 3536 3738 394041 4243444546 47 101976_en_05 PHOENIX CONTACT 3 S5/S7 ADAPTER 5 Commissioning adapters for extending the existing S5-115 field wiring All signals of the existing S5-115 wiring are extended 3 or 5 meters with the help of the universal commissioning adapters. The open cable end can be connected to various controllers such as S7-400 or S7-300. Thus, the existing field wiring of S5-115 can communicate with the new controller for test purposes. Since the new control unit is temporarily arranged before the control cabinet, the original status of the system can be restored if required. If the system functions with the new controller without problems, the S5-115 can now be replaced. Ordering Data Description Type Order No. Pcs./Pck. Connection of all S5-115 connections (1 to 23, 25 to 47) at the open cable end, cable length 3 m FLKM S115/47X0,75/3,0M/OE 2314985 1 Connection of all S5-115 connections (1 to 23, 25 to 47) at the open cable end, cable length 5 m FLKM S115/47X0,75/5,0M/OE 2314998 1 Technical Data Maximum permissible operating voltage 250 V AC/DC Maximum permissible current (per branch 6A Ambient temperature (operation) -20 °C … 50 °C Ambient temperature (storage/transport) -20 °C … 80 °C Mounting position Any Standards/specifications EN 60664-1 Application Example Connection Scheme FLKM S115/47X0,75/...M/OE 1 2 3 22 23 25 26 1 2 3 1 2 3 S5-115 101976_en_05 22 23 25 26 22 23 25 26 45 46 47 45 46 47 45 46 47 PHOENIX CONTACT 4 S5/S7 ADAPTER 6 Adapters for Converting S5-135/155 to S7-400 FLKM S135/... adapters provide a direct connection between a SIMATIC® S5 connector wired with individual wires and the SIMATIC® S7-400 base board. The SIMATIC® S5 connector is plugged directly into an S7-400 I/O card with the aid of the FLKM S135/... adapter. A new 6.1 SIMATIC® S7-400 is installed in place of the SIMATIC® S5. The existing field wiring remains intact. Attention: The LEDs of the S7-400 module are hidden. 6ES5 420... to 6ES5 432... Ordering Data Description Type Order No. Pcs./Pck. Digital IN 24 V/60 V from S5-135/155 to S7-400 6ES5 420-4UA14 to 6ES7 421-1BL01-0AA0 1 FLKM S135/S400/S0120 2301723 1 6ES5 430-4UA14 to 6ES7 421-1BL01-0AA0 2 FLKM S135/S400/SO121 2301736 1 6ES5 431-4UA12 to 6ES7 421-7DH00-0AB0 3 FLKM S135-431-4UA/S400 2314846 1 6ES5 432-4UA12 to 6ES7 421-1BL01-0AA0 4 FLKM S135/S400/SO122 2301749 1 Technical Data Maximum permissible operating voltage 1 2 3 4 24 V AC/DC 60 V DC 24 V DC 24 V AC/DC Maximum permissible current (per branch) 4A 2A 4A 4A Maximum permissible current (separate power supply) 4A 2A 4A 4A 500 V (50 Hz, 1 min.) 1.25 kV (50 Hz, 1 min.) 1.25 kV (50 Hz, 1 min.) 1.25 kV (50 Hz, 1 min.) Test voltage Ambient temperature (operation) -20°C ... +50°C Mounting position Any Standards/specifications DIN EN 50178/IEC 62103 Connection Schemes FLKM S135/S400/S0120 S7-400 1 2 3 4 5 6 7 8 9 10 11 FLKM S135-431-4UA/S400 15 16 17 18 19 20 21 22 L+ S5-135 1 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 S7-400 27 28 29 30 31 32 33 34 39 40 41 42 43 44 45 46 48 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 M 25 26 27 28 29 30 31 32 S5-135 34 35 36 37 38 39 40 41 FLKM S135/S400/SO121 S7-400 1 2 3 FLKM S135/S400/SO122 4 5 6 7 8 9 10 11 15 16 17 18 19 20 21 22 S7-400 1 2 3 4 5 6 7 8 9 10 11 151617181920 21 22 L+ S5-135 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 S7-400 27 28 29 30 31 32 33 34 39 40 41 42 43 44 45 46 48 S5-135 4 5 6 7 8 9 10 11 13 14 15 16 1718 19 20 S7-400 272829 30 31 32 33 34 39 40 41 42 43 44 45 46 48 M M S5-135 101976_en_05 25 26 27 28 29 30 31 32 34 35 36 37 38 39 40 41 21 42 M S5-135 252627 28 29 30 31 32 34 35 36 37 38 39 4041 21 42 12 33 PHOENIX CONTACT 5 S5/S7 ADAPTER 6.2 6ES5 436... to 6ES5 453... Ordering Data Description Type Order No. Pcs./Pck. 1 FLKM S135/S400/SO123 2301752 1 6ES5 441-4UA12 to 6ES7 422-1BL00-0AA0 2 FLKM S135/S400/SO125 2301778 1 6ES5 451-4UA14 to 6ES7 422-1BL00-0AA0 3 FLKM S135/S400/SO126 2301781 1 4 FLKM S135/S400/SO127 2301794 1 Digital IN 120/230 V UC from S5-135/155 to S7-400 6ES5 436-4UA12 to 6ES7 421-1FH20-0AA0 Digital OUT 24 V from S5-135/155 to S7-400 Digital OUT 24 V DC/2 A from S5-135/155 to S7-400 6ES5 453-4UA12 to 6ES7 422-1HH00-0AA0 Technical Data Maximum permissible operating voltage 1 2 3 4 230 V AC/DC 24 V AC/DC 24 V DC 24 V DC 1.25 kV (50 Hz, 1 min.) 500 V (50 Hz, 1 min.) Maximum permissible current (per branch) 4A Maximum permissible current (separate power supply) 4A Test voltage 1.5 kV (50 Hz, 1 min.) 500 V (50 Hz, 1 min.) Ambient temperature (operation) -20°C ... +50°C Mounting position Any Standards/specifications DIN EN 50178/IEC 62103 Connection Schemes FLKM S135/S400/SO123 FLKM S135/S400/SO126 S7-400 1 2 20 4 S5-135 1 43 4536 48 S7-400 39 4125 S7-400 1 2 4 6 8 10 15 17 19 21 13 24 S5-135 1 2 6 8 10 12 14 16 18 S7-400 27 29 31 33 39 41 S5-135 27 29 31 33 35 37 S5-135 FLKM S135/S400/SO125 1 2 S5-135 1 2 3 4 5 6 7 8 9 10 11 S7-400 3 4 5 6 7 8 9 10 11 1L+ 13 14 15 16 17 18 19 20 26 27 28 29 30 31 32 33 34 38 39 40 41 42 43 44 45 46 48 24 25 26 27 28 29 30 31 32 2L+ 34 35 36 37 38 39 40 41 2 21 M FLKM S135/S400/SO127 3 4 5 6 7 8 9 10 11 14 15 16 17 18 19 20 21 22 S7-400 3 4 5 6 7 8 9 10 11 14 15 16 17 18 19 20 21 22 13 14 15 16 17 18 19 20 26 27 28 29 30 31 32 33 34 38 39 40 41 42 43 44 45 46 48 S7-400 1 2 6 11 4 5 9 10 15 16 20 21 17 22 S5-135 1 3 6 10 5 7 9 11 14 16 18 20 15 19 S7-400 27 28 32 33 39 40 44 45 29 34 41 46 S5-135 26 28 30 32 35 37 39 41 27 31 36 40 M S5-135 101976_en_05 24 25 26 27 28 29 30 31 32 34 35 36 37 38 39 40 41 PHOENIX CONTACT 21 6 S5/S7 ADAPTER 6.3 6ES5 454... to 6ES5 460... Ordering Data Description Type Order No. Pcs./Pck. 1 FLKM S135-454-4UA/S400 2314859 1 2 FLKM S135/S400/SO124 2301765 1 3 FLKM S135-460-4UA/I/S400 2314613 1 4 FLKM S135-460-4UA/U/S400 2314862 1 Digital OUT 24 V DC/2 A from S5-135/155 to S7-400 6ES5 454-4UA14 to 6ES7 422-1BH11-0AA0 Digital OUT 230 V UC/2 A from S5-135/155 to S7-400 6ES5 456-4UA12 to 6ES7 422-1FH00-0AA0 Analog IN (current measurement only) from S5-135/155 to S7-400 6ES5 460-4UA13 to 6ES7 431-1KF00-0AB0 Analog IN (voltage measurement only) from S5-135/155 to S7-400 6ES5 460-4UA13 to 6ES7 431-1KF00-0AB0 Technical Data Maximum permissible operating voltage 1 2 3 4 24 V DC 230 V AC 24 V DC 24 V DC 500 V (50 Hz, 1 min.) 500 V (50 Hz, 1 min.) Maximum permissible current (per branch) 4A Maximum permissible current (separate power supply) 4A Test voltage 1.25 kV (50 Hz, 1 min.) 1.5 kV (50 Hz, 1 min.) Ambient temperature (operation) -20°C ... +50°C Mounting position Vertical Standards/specifications DIN EN 50178/IEC 62103 Connection Schemes FLKM S135-454-4UA/S400 FLKM S135-460-4UA/I/S400 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 L- S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 L- S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 FLKM S135/S400/SO124 S7-400 1 2 11 22 4 6 FLKM S135-460-4UA/U/S400 8 10 15 17 19 21 13 24 36 48 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 N S5-135 1 2 4 6 8 10 12 14 16 18 20 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 34 46 27 29 31 33 39 41 43 45 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 S5-135 25 27 29 31 33 35 37 39 41 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 101976_en_05 PHOENIX CONTACT 7 S5/S7 ADAPTER 6.4 6ES5 465... to 6ES5 470... Ordering Data Description Type Order No. Pcs./Pck. 1 FLKM S135-465-4UA/T/S400 2314875 1 2 FLKM S135-465-4UA/UI/S400 2314888 1 3 FLKM S135-470-4UC/I/S400 2314626 1 4 FLKM S135-470-4UC/U/S400 2314891 1 Analog IN (Pt 100 only) from S5-135/155 to S7-400 6ES5 465-4UA13 to 6ES7 431-7KF10-0AB0 Analog IN (current and voltage measurement only) from S5-135/155 to S7-400 6ES5 465-4UA13 to 6ES7 431-0HH00-0AB0 6ES5 465-4UA13 to 6ES7 431-7QH00-0AB0 Analog OUT (current output only) from S5-135/155 to S7-400 6ES5 470-4UA13 to 6ES7 432-1HF00-0AB0 6ES5 470-4UC13 to 6ES7 432-1HF00-0AB0 Analog OUT (voltage output only) from S5-135/155 to S7-400 6ES5 470-4UA13 to 6ES7 432-1HF00-0AB0 6ES5 470-4UB13 to 6ES7 432-1HF00-0AB0 6ES5 470-4UC13 to 6ES7 432-1HF00-0AB0 1 Technical Data 2 3 Maximum permissible operating voltage 4 24 V DC Maximum permissible current (per branch) 2A 4A 4A 4A Maximum permissible current (separate power supply) 2A 4A 4A 4A Test voltage 500 V (50 Hz, 1 min.) Ambient temperature (operation) -20°C ... +50°C Mounting position Any Standards/specifications DIN EN 50178/IEC 62103 Connection Schemes FLKM S135-465-4UA/T/S400 FLKM S135-470-4UC/I/S400 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 23 24 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 1718 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 4041 4243 44 45 4647 48 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 LL- S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 FLKM S135-465-4UA/UI/S400 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 FLKM S135-470-4UC/U/S400 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 S7-400 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 2324 S5-135 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 202122 23 24 S7-400 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 4748 S5-135 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 101976_en_05 PHOENIX CONTACT 8 S5/S7 ADAPTER 7 Adapters for Converting S5-135 to S7-300 S5/S7 adapters connect S5-135 front adapters wired with individual wires to S7-300 I/O modules. With the aid of the FLKM S135/S7/FLK50 converter module, the signals of the S5-135 front adapter can be converted to a 50-pos. strip. An 7.1 FLK 50/EZ-DR/.../KONFEK 50-pos. system cable and a front adapter for SIMATIC® S7-300 (FLKM 50-PA-S300) connect the signals to the I/O module. 6ES5 420... to 6ES5 451... Ordering Data Description Type Order No. Pcs./Pck. FLKM S135/S7/FLK50/PLC 2314736 1 Digital IN and OUT 24 V DC from S5-135 to S7-300 IN 6ES5 420-4UA14 to 6ES7 321-1BL00-0AA0 6ES5 430-4UA14 to 6ES7 321-1BL00-0AA0 OUT 6ES5 441-4UA14 to 6ES7 322-1BL00-0AA0 6ES5 451-4UA14 to 6ES7 322-1BL00-0AA0 Technical Data Maximum permissible operating voltage 30 V AC/DC Maximum permissible current (per branch) 1A Maximum permissible current (separate power supply) 2A Test voltage 500 V (50 Hz, 1 min.) Ambient temperature (operation) -20°C ... +50°C Mounting position Any Standards/specifications DIN EN 50178/IEC 62103 Application Example Connection Schemes FLKM S135/S7/FLK50/PLC FLK50 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1819 20 21 22 23 24 L+ DR1 LL2+ S5-135 FLK50 DR2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1516 17 18 19 2021 DR3 DR4 25 26 27 28 2930313233 34 35 36 37 38 39 40 41 4243 44 45 46 47 48 49 50 S5-135 2223 242526272829 3031 32 33 101976_en_05 34 3536 37 3839 40 41 42 PHOENIX CONTACT 9 S5/S7 ADAPTER 8 Commissioning adapters for extending the existing S5-135 field wiring All signals of the existing S5-135 wiring are extended 3 or 5 meters with the help of the universal commissioning adapters. The open cable end can be connected to various controllers such as S7-400 or S7-300. Thus, the existing field wiring of S5-135 can communicate with the new controller for test purposes. Since the new control unit is temporarily arranged before the control cabinet, the original status of the system can be restored if required. If the system functions with the new controller without problems, the S5-135 can now be replaced. Ordering Data Description Type Order No. Pcs./Pck. Connection of all S5-135 connections (1 to 42) at the open cable end, cable length 3 m FLKM S135/42X0,75/3,0M/OE 2315007 1 Connection of all S5-135 connections (1 to 42) at the open cable end, cable length 5 m FLKM S135/42X0,75/5,0M/OE 2318017 1 Technical Data Maximum permissible operating voltage 250 V AC/DC Maximum permissible current (per branch) 6A Ambient temperature (operation) -20 °C … 50 °C Ambient temperature (storage/transport) -20 °C … 80 °C Mounting position Any Standards/specifications EN 60664-1 Application Example Connection Schemes FLKM S135/42X0,75 /…M/OE 1 2 3 1 2 3 1 2 3 S5-135 101976_en_05 40 41 42 40 41 42 40 41 42 PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49-(0) 5235-3-00 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com 10