2320526

https://www.phoenixcontact.com/ae/products/2320526 Capacity module - QUINT4-CAP/24DC/3.8/1KJ/PT - 2320526 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) QUINT capacity module with maintenance-free double-layer capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC / 3.8 A / 1 kJ Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626246925 Weight per Piece (excluding packing) 445.000 g Custom tariff number 85322900 Technical data Dimensions Width 85 mm Height 102.5 mm Depth 90 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (start-up type tested) -40 °C Ambient temperature (storage/transport) -40 °C ... 60 °C Max. permissible relative humidity (operation) ≤ 95 % Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Installation height ≤ 4000 m Input data Input voltage 24 V DC (SELV) Input voltage range 22.5 V DC ... 30 V DC 06/17/2020   Page 1 / 6 https://www.phoenixcontact.com/ae/products/2320526 Capacity module - QUINT4-CAP/24DC/3.8/1KJ/PT - 2320526 Technical data Input data Current consumption (maximum) 4.3 A (max.) Current consumption (idle) 0.08 A (No-load) Current consumption (charging process) 0.43 A (charging process) Fixed backup threshold < 22 V DC Output data Nominal output voltage 24 V DC (depending on the input voltage) Nominal output current (IN) 3.8 A Connection in parallel Yes, up to 2 modules with decoupling module Connection in series No Power loss nominal load max. 97 % (with charged energy storage device) MTBF (IEC 61709, SN 29500) 996550 h (40 °C) 1631804 h (25 °C) 449865 h (60 °C) Degree of protection IP20 Protection class III Mounting position Any, on NS 35 DIN rail Assembly instructions alignable: horizontally 0 mm, vertically 50 mm Connection data, input Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 10 mm Connection data, output Connection method Push-in connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 10 mm 06/17/2020   Page 2 / 6 https://www.phoenixcontact.com/ae/products/2320526 Capacity module - QUINT4-CAP/24DC/3.8/1KJ/PT - 2320526 Technical data Signaling Signalization designation UIn OK Output name Transistor output, active Output voltage 24 V (UN - 1 V (typical)) Continuous load current 20 mA Status display LED Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Signalization designation Ready Output name Transistor output, active Output voltage 24 V (UN - 1 V (typical)) Continuous load current 20 mA Status display LED Signalization designation Reference potential for Ready, UIn OK, and Remote EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC Noise emission EN 61000-6-3 Electrostatic discharge EN 61000-4-2 Contact discharge 6 kV (Test Level 3) Discharge in air 8 kV (Test Level 3) Electromagnetic HF field EN 61000-4-3 Frequency range 80 MHz ... 6 GHz Test field strength 10 V/m Comments Criterion A Fast transients (burst) EN 61000-4-4 Input 2 kV (Test Level 3 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Signal 2 kV (Test Level 4 - asymmetrical) Comments Criterion B Surge voltage load (surge) EN 61000-4-5 Input 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Output 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal 1 kV (Test Level 1 - asymmetrical) Comments Criterion B 06/17/2020   Page 3 / 6 https://www.phoenixcontact.com/ae/products/2320526 Capacity module - QUINT4-CAP/24DC/3.8/1KJ/PT - 2320526 Technical data EMC data Frequency range 0.15 MHz ... 80 MHz Voltage 10 V Comments Criterion A Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Drawings Block diagram Classifications eCl@ss eCl@ss 5.1 27242213 eCl@ss 8.0 27049201 eCl@ss 9.0 27049201 ETIM ETIM 5.0 EC000382 ETIM 6.0 EC000382 ETIM 7.0 EC000382 UNSPSC UNSPSC 13.2 39121004 UNSPSC 18.0 26111710 UNSPSC 19.0 26111710 06/17/2020   Page 4 / 6 https://www.phoenixcontact.com/ae/products/2320526 Capacity module - QUINT4-CAP/24DC/3.8/1KJ/PT - 2320526 Classifications UNSPSC UNSPSC 20.0 26111710 UNSPSC 21.0 26111710 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 cULus Listed       Accessories Accessories Base element Base element - CB 1/6-2/4 PT-BE - 2800929 Base element with push-in connection technology for CB ... device circuit breakers     Fuse 06/17/2020   Page 5 / 6 https://www.phoenixcontact.com/ae/products/2320526 Capacity module - QUINT4-CAP/24DC/3.8/1KJ/PT - 2320526 Accessories Fuse - SI FORM C 7,5 A DIN 72581 - 0913702 Flat-type plug-in fuse, type C, color code: brown, nominal current: 7.5 A     Fuse terminal block Fuse modular terminal block - PT 6-FSI/C - 3212166 Fuse modular terminal block, fuse type: Flat, connection method: Push-in connection, cross section: 0.5 mm²- 10 mm², AWG: 20 - 8, nominal current: 25 A, nom. voltage: 400 V, width: 8.2 mm, fuse type: Type C / max. 2.2 W, mounting type: NS 35/7,5, NS 35/15, color: black     Thermomagnetic device circuit breakers Thermomagnetic device circuit breaker - CB TM1 8A SFB P - 2800842 Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/17/2020   Page 6 / 6