2688048

https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F, Digital output module, Digital outputs: 16, 24 V DC, 500 mA, connection method: 3-wire, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline F station. It is used to output digital signals. The outputs are protected against short circuit and overload. Your advantages  16 digital outputs  24 V DC, 500 mA  Connection of actuators in 2 and 3-wire technology  Minimum update time of < 100 μs  Device rating plate stored  Approved for use in applications which meet functional safety requirements Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356501583 Weight per Piece (excluding packing) 280.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 53.6 mm 09/08/2019   Page 1 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Technical data Dimensions Height 129.9 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 234 g Note on weight specifications with connectors and bus base module Interfaces Designation Axioline F local bus No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials Designation Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) 09/08/2019   Page 2 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Technical data Axioline potentials Current consumption max. 120 mA (up to HW 04) max. 60 mA (from HW 05) Power consumption max. 600 mW (up to HW 04) max. 300 mW (from HW 05) Designation Supply for digital output modules (UO) Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption max. 8 A (provide external protection) Power consumption max. 240 W (of which 560 mW with internal losses) Type of protection Surge protection of the supply voltage Polarity reversal protection of the supply voltage Protection max. 8 A (polarity reversal protection up to 5 A) Digital outputs Output name Digital outputs Connection method Push-in connection Connection technology 3-wire Number of outputs 16 Type of protection Short-circuit protection, overload protection of the outputs Output voltage 24 V Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module 8 A (provide external protection) Nominal load, inductive max. 12 VA (1.2 H, 48 Ω, with nominal voltage) Nominal load, lamp max. 12 W (at nominal voltage) Nominal load, ohmic max. 12 W (48 Ω, with nominal voltage) Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance 09/08/2019   Page 3 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Technical data Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Block diagram Internal wiring of the terminal points 09/08/2019   Page 4 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Connection diagram Connection example 09/08/2019   Page 5 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Diagram Maximum energy consumption of the outputs when switching off inductive loads The diagram shows the maximum amount of energy that may be fed back into the corresponding output groups (outputs 1 to 4, 5 to 8, 9 to 12, 13 to 16) for each switch off procedure when switching off an inductive load without external freewheeling circuit. The current data refers to the ohmic DC voltage component of the inductive load. Note: Restrict freewheeling voltage to a maximum of -15 V when using an external freewheeling circuit. The external freewheeling circuit has no function in the event of a higher negative voltage. 09/08/2019   Page 6 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001599 09/08/2019   Page 7 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Classifications ETIM ETIM 5.0 EC001599 ETIM 6.0 EC001599 ETIM 7.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 Approvals Approvals Approvals DNV GL / PRS / BV / LR / KR / NK / ABS / RINA / UL Listed / cUL Listed / EAC / LR / UL Listed / cUL Listed / NK / ABS / PRS / DNV GL / BV / RINA / KR / BSH / EAC Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAA00000DF PRS    http://www.prs.pl/  TE/2239/880590/19 BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  36433/B0 BV 09/08/2019   Page 8 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Approvals LR    http://www.lr.org/en  14-20019 KR    http://www.krs.co.kr/eng/main/main.aspx  HMB17372-AC002 NK    http://www.classnk.or.jp/hp/en/  14A006  http://www.eagle.org/eagleExternalPortalWEB/  18-HG1767360-PDA ABS  RINA    http://www.rina.org/en  ELE256518XG UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      EAC-Zulassung LR    http://www.lr.org/en  14-20019 UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 09/08/2019   Page 9 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Approvals cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 NK    http://www.classnk.or.jp/hp/en/  14A006  http://www.eagle.org/eagleExternalPortalWEB/  18-HG1767360-PDA ABS  PRS    http://www.prs.pl/  TE/2239/880590/19 DNV GL    https://approvalfinder.dnvgl.com/  TAA00000DF BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  36433/B0 BV RINA    http://www.rina.org/en  ELE256518XG KR    http://www.krs.co.kr/eng/main/main.aspx  HMB17372-AC002  http://www.bsh.de/de/index.jsp  840    EAC-Zulassung BSH  EAC   Accessories Accessories 09/08/2019   Page 10 / 11 https://www.phoenixcontact.com/us/products/2688048 I/O module - AXL F DO16/3 2F - 2688048 Accessories DIN rail connector Bus connector - AXL F BS F - 2688129 Axioline F bus base module for housing type F     Terminal marking Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/08/2019   Page 11 / 11