https://www.phoenixcontact.com/us/products/2688077
I/O module - AXL F RTD8 1F - 2688077
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Axioline F temperature module, 8 inputs for connecting temperature shunts (including bus base module and
connectors)
Product description
The module is designed for use within an Axioline F station.
It is used to acquire signals from resistive temperature sensors.
The module supports all common platinum and nickel sensors according to DIN EN 60751 and SAMA. Cu10, Cu50, Cu53 sensors as well as various
KTY8x sensor types are also supported.
Product Features
8 analog input channels for the connection of resistance temperature detectors (RTD)
500 Ω and 5 kΩ linear inputs
Connection of sensors in 2, 3, and 4-wire technology
Integrated, digital sensor linearization
Standardized measured value representation directly in °C, °F or Ω
Measured value display in 16-bit format or floating point format
Programmable filters
Short-circuit protected inputs
Device rating plate stored
Diagnostic and status indicators
Temperature stability
Very high level of noise immunity
Low noise emission
Installation monitoring by means of “Channel scout” function
Key commercial data
Packing unit
1 pc
Weight per Piece (excluding packing)
240.0 GRM
Custom tariff number
85389091
Country of origin
Germany
09/03/2014 Page 1 / 6
https://www.phoenixcontact.com/us/products/2688077
I/O module - AXL F RTD8 1F - 2688077
Technical data
Dimensions
Width
53.6 mm
Height
126.1 mm
Depth
54 mm
Note on dimensions
The depth is valid when a TH 35-7.5 DIN rail is used (according to
EN 60715).
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
Connection data
Designation
Axioline F connector
Connection method
Push-in technology
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
1.5 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
16
Stripping length
8 mm
General
Weight
215 g
Note on weight specifications
with connectors and bus base module
Mounting type
DIN rail
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Test section
5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min
5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min
Conformance with EMC directives
Noise immunity test in accordance with EN 61000-6-2 Electrostatic
discharge (ESD) EN 61000‑4‑2/IEC 61000‑4‑2 Criterion B; 6 kV contact
discharge, 8 kV air discharge
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic
fields EN 61000‑4‑3/IEC 61000‑4‑3 Criterion A; Field intensity: 10 V/m
09/03/2014 Page 2 / 6
https://www.phoenixcontact.com/us/products/2688077
I/O module - AXL F RTD8 1F - 2688077
Technical data
General
Noise immunity test in accordance with EN 61000-6-2 Fast transients
(burst) EN 61000‑4‑4/IEC 61000‑4‑4 Criterion B, 2 kV
Noise immunity test in accordance with EN 61000-6-2 Transient surge
voltage (surge) EN 61000‑4‑5/IEC 61000‑4‑5 Criterion B; supply lines DC:
±0.5 kV/±0.5 kV (symmetrical/asymmetrical); ±1 kV to shielded I/O cables
Noise immunity test in accordance with EN 61000-6-2 Conducted
interference EN 61000‑4‑6/IEC 61000‑4‑6 Criterion A; Test voltage 10 V
Noise emission test according to EN 61000-6-3 Radio interference
properties EN 55022 Class B
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Interfaces
Designation
Axioline F local bus
Connection method
Bus base module
Transmission speed
100 MBit/s
Axioline potentials
Communications power UBus
5 V DC (via bus base module)
Current consumption from UBus
typ. 115 mA
max. 180 mA
Supply of analog modules UA
24 V DC
Current consumption from UA
typ. 15 mA
max. 25 mA
Analog inputs
Number of inputs
8 (for resistance temperature detectors)
Input name
Analog inputs
Description of the input
Inputs for resistive temperature sensors
Connection method
Spring-cage connection with direct connector-in method
2, 3, 4-wire (shielded)
Sensor types (RTD) that can be used
Pt, Ni, KTY, Cu sensors
Linear resistance measuring range
0 Ω ... 500 Ω
0 kΩ ... 5 kΩ
Nominal value of the current sources
1 mA (Pt100, Ni100, RLin 500 Ω; pulse current, the specification is valid
during the sampling phase)
Measured value representation
16 bits (15 bits + sign bit)
Resolution A/D
24 bit
Protective circuit
Short-circuit protection, overload protection of the inputs
Data formats
IB IL, S7-compatible
09/03/2014 Page 3 / 6
https://www.phoenixcontact.com/us/products/2688077
I/O module - AXL F RTD8 1F - 2688077
Technical data
Analog inputs
Precision
See Tables under tolerance values
Input filter time
40 ms
Classifications
eCl@ss
eCl@ss 4.0
27240405
eCl@ss 4.1
27240405
eCl@ss 5.0
27242201
eCl@ss 5.1
27242601
eCl@ss 6.0
27242601
eCl@ss 7.0
27242601
eCl@ss 8.0
27242601
ETIM
ETIM 3.0
EC001599
ETIM 4.0
EC001599
ETIM 5.0
EC001596
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
39121311
UNSPSC 12.01
39121311
UNSPSC 13.2
39121311
Approvals
Approvals
Approvals
BSH / GL / DNV / RINA / BV / LR / GL-SW / UL Listed / cUL Listed / ABS / GL / cULus Listed
Ex Approvals
Approvals submitted
09/03/2014 Page 4 / 6
https://www.phoenixcontact.com/us/products/2688077
I/O module - AXL F RTD8 1F - 2688077
Approvals
Approval details
BSH
GL
DNV
RINA
BV
LR
GL-SW
UL Listed
cUL Listed
ABS
GL
cULus Listed
Drawings
09/03/2014 Page 5 / 6
https://www.phoenixcontact.com/us/products/2688077
I/O module - AXL F RTD8 1F - 2688077
Connection diagram
a1
00
01
02
03
04
05
06
07
U+
a2
10
11
12
13
14
15
16
20
21
22
23
24
25
26
a1
00
01
02
03
04
05
06
07
a2
10
11
12
13
14
15
16
17
U+
RL
17
I+
b1
Connection diagram
27
RTD
I–
RL
I+
ϑ
RL
b1
20
21
22
23
24
25
26
RTD
I–
RL
b2
30
31
32
33
34
35
36
ϑ
RL
27
RL
37
b2
30
31
32
33
34
35
36
37
U–
RL
Connection example: 3-wire connection
Connection example: 4-wire connection
Connection diagram
a1
00
01
02
03
04
05
06
07
a2
10
11
12
13
14
15
16
17
Connection diagram
a1
00
01
02
03
04
05
06
07
a2
10
11
12
13
14
15
16
17
U+
I+
b1
20
21
22
23
24
25
26
27
RTD
I–
RL
I+
ϑ
RL
b1
20
21
22
23
24
25
26
RTD
I–
RL
RL
b2
30
31
32
33
34
35
36
ϑ
RL
27
b2
37
30
31
32
33
34
35
36
37
U–
RL
Connection example: 2-wire connection
Connection example: 4-wire connection for 3-wire sensor with very long
supply lines (> 100 m)
Dimensioned drawing
53,6
Block diagram
54
Supervisor
UBus
8x
mC
Local bus
FE
#
126,1
122,4
Supervisor
U
D
UA
E1
E2
+5V DC
UANA
24 V
RTD IN
Dimensional drawing
Internal wiring of the terminal points
Phoenix Contact 2014 © - all rights reserved
http://www.phoenixcontact.com
09/03/2014 Page 6 / 6
很抱歉,暂时无法提供与“2688077”相匹配的价格&库存,您可以联系我们找货
免费人工找货