2688093

https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline special function module, 2 counter inputs, 2 incremental encoder inputs (including bus base module and connectors) Product description The module is designed for use within an Axioline station. On the one hand, it is used to acquire fast pulse sequences from sensors, and on the other hand to detect positions using incremental encoders. The module combines two counter inputs for the evaluation of fast counter pulses and two incremental encoder inputs for position detection.   Product Features  2 counter inputs  2 incremental encoder inputs  Maximum input frequency: 300 kHz/100 kHz (depending on the wiring)  32-bit counter (up and down)  Output control according to two limit values  Counter: counting (source) is controlled via a control input (gate)  Counter: single or periodic counting  Incremental encoder acquisition: acquisition of digital signals from symmetrical and asymmetrical incremental encoders  Incremental encoder acquisition: evaluation of linear or rotary axes  Device rating plate stored  Diagnostic and status indicators   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 240.0 GRM Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 53.6 mm 09/03/2014   Page 1 / 7 https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Technical data Dimensions Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7.5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Weight 205 g Note on weight specifications with connectors and bus base module Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Conformance with EMC directives Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000‑4‑2/IEC 61000‑4‑2 Criterion B; 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000‑4‑3/IEC 61000‑4‑3 Criterion A; Field intensity: 10 V/m Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000‑4‑4/IEC 61000‑4‑4 Criterion B, 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient surge voltage (surge) EN 61000‑4‑5/IEC 61000‑4‑5 Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical) Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000‑4‑6/IEC 61000‑4‑6 Criterion A; Test voltage 10 V Noise emission test according to EN 61000-6-3 Radio interference properties EN 55022 Class B Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Diagnostics messages Short-circuit / overload of the digital outputs Yes Error at the symmetrical incremental encoder Yes 09/03/2014   Page 2 / 7 https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Technical data Interfaces Designation Axioline F local bus Connection method Bus base module Transmission speed 100 MBit/s Axioline potentials Communications power UBus 5 V DC (via bus base module) Current consumption from UBus typ. 100 mA max. 120 mA Supply of digital input modules UI 24 V DC Current consumption from UI typ. 50.5 mA (Own current consumption; without wiring of the terminal points) max. 2.5 A (dependent on the encoder or sensor type used and the load on the digital output.) Counter inputs Number of inputs 2 (S1, S2) Description of the input EN 61131-2, type 3 Connection method Push-in technology Input voltage 24 V DC Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 11 V DC ... 30 V DC Input frequency max. 300 kHz (1 channel wired) max. 100 kHz (More than one channel wired or Z signal monitoring via the firmware) Input current 2.5 mA (per channel) Resolution 32 Permissible cable length to the sensor 30 m Encoder inputs Input name Incremental encoder inputs Number of inputs 2 (A1, /A1, B1, /B1, Z1, /Z1; A2, /A2, B2, /B2, Z2, /Z2) Connection method Push-in technology Encoder signals Symmetrical and asymmetrical encoders Cable length 30 m Encoder data Number of 5 V encoder supplies 2 (UE1, UE2) Nominal output voltage 5 V DC Voltage range 5 V DC ... 5.5 V DC Current carrying capacity max. 250 mA 09/03/2014   Page 3 / 7 https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Technical data Encoder data Type of protection Short-circuit protection Protective circuit/component Electronic Number of 24 V encoder supplies 2 (US1, US2) Nominal output voltage 24 V DC Voltage range 19.2 V DC ... 30 V DC Current carrying capacity typ. 500 mA Type of protection Short-circuit protection Protective circuit/component Electronic Designation Symmetrical incremental encoders Encoder types that can be connected max. 2 (A, /A, B, /B, (Z, /Z)) Type of connection of signals Push-in technology Encoder supply voltage 5 V DC 24 V DC Signal voltage level Differential signal (signal – inverted signal) ±0.5 V, minimum; ±6 V, maximum Common mode voltage range signal - ground -10 V ... 13.2 V Input frequency max. 300 kHz (1 channel wired) max. 100 kHz (More than one channel wired or Z signal monitoring via the firmware) Designation Asymmetrical incremental encoders Encoder types that can be connected max. 2 (A, B, (Z)) Type of connection of signals Push-in technology Signal voltage level Low ≤ 2.5 V, high ≥ 3.5 V (up to 27 V, maximum) Input frequency max. 300 kHz (1 channel wired) max. 100 kHz (More than one channel wired or Z signal monitoring via the firmware) Digital inputs Input name Digital inputs Description of the input EN 61131-2, type 3 Connection method Push-in technology 1-wire (optionally 2, 3-wire) Number of inputs 8 (CNT: G1, G2, Dir1, Dir2; INC: Ref1, Ref2, L1, L2) Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 11 V DC ... 30 V DC Nominal input current at UIN 2.5 mA (per channel) Digital outputs Output name Digital outputs 09/03/2014   Page 4 / 7 https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Technical data Digital outputs Connection method Push-in technology 1-wire Number of outputs 2 (Out1, Out2) Protective circuit Short-circuit protection, overload protection of the outputs Output voltage 24 V DC Nominal output voltage 24 V DC Maximum output current per channel 500 mA Nominal load, inductive max. 12 VA (1.2 H; 48 Ω; with nominal voltage) Nominal load, lamp max. 12 W (at nominal voltage) Nominal load, ohmic max. 12 W (48 Ω; with nominal voltage) Classifications eCl@ss eCl@ss 4.0 27240409 eCl@ss 4.1 27240409 eCl@ss 5.0 27242205 eCl@ss 5.1 27242605 eCl@ss 6.0 27242605 eCl@ss 7.0 27242605 eCl@ss 8.0 27242605 ETIM ETIM 4.0 EC001601 ETIM 5.0 EC001601 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 39121311 Approvals Approvals 09/03/2014   Page 5 / 7 https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Approvals Approvals UL Listed / cUL Listed / BSH / RINA / DNV / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  BSH  RINA  DNV  cULus Listed  Drawings 09/03/2014   Page 6 / 7 https://www.phoenixcontact.com/us/products/2688093 Special function module - AXL CNT 2/INC 2 - 2688093 Connection diagram 00 01 02 Dimensioned drawing 53,6 03 54 A /A 2 10 11 12 13 20 21 22 23 30 31 32 33 B /B 2 Z /Z 2 24 V DC 122,4 126,1 VCC 2 Block diagram UBus mC Axio bus Supervisor FE D UI E1 +5V DC A B Z UI 24 V 2x Internal wiring of the terminal points Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/03/2014   Page 7 / 7