https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Axioline F, Digital output module, Digital outputs: 16, 24 V DC, 500 mA, connection method: 1-wire, transmission
speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F
connectors
Product Description
The module is designed for use within an Axioline F station.
It is used to output digital signals.
The outputs are protected against short circuit and overload.
Your advantages
16 digital outputs
24 V DC, 500 mA
Connection of actuators in single-wire technology
Minimum update time of < 100 μs
Device rating plate stored
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356606530
Weight per Piece (excluding packing)
180.000 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Dimensions
Width
35 mm
Height
126.1 mm
11/08/2019 Page 1 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Technical data
Dimensions
Depth
54 mm
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to
EN 60715).
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
Connection data
Designation
Axioline F connector
Connection method
Push-in connection
Note on the connection method
Please observe the information provided on conductor cross sections in
the “Axioline F: system and installation” user manual.
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Stripping length
8 mm
General
Mounting type
DIN rail
Net weight
134 g
Note on weight specifications
with connectors and bus base module
Interfaces
Designation
Axioline F local bus
No. of channels
2
Connection method
Bus base module
Transmission speed
100 Mbps
Axioline potentials
Designation
Axioline F local bus supply (UBus)
Supply voltage
5 V DC (via bus base module)
Current consumption
max. 120 mA (up to HW 02)
11/08/2019 Page 2 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Technical data
Axioline potentials
max. 60 mA (from HW 03)
Power consumption
max. 600 mW (up to HW 02)
max. 300 mW (from HW 03)
Designation
Supply for digital output modules (UO)
Supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
max. 8 A (provide external protection)
Power consumption
max. 240 W (of which 560 mW with internal losses)
Type of protection
Surge protection of the supply voltage
Polarity reversal protection of the supply voltage
Protection
max. 8 A (polarity reversal protection up to 5 A)
Digital outputs
Output name
Digital outputs
Connection method
Push-in connection
Connection technology
1-wire
Number of outputs
16
Type of protection
Short-circuit protection, overload protection of the outputs
Output voltage
24 V
Nominal output voltage
24 V DC
Maximum output current per channel
500 mA
Maximum output current per module
8 A (provide external protection)
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, lamp
12 W (at nominal voltage)
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Electrical isolation
Test section
5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1
min.
5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min.
Standards and Regulations
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
11/08/2019 Page 3 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Technical data
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
Drawings
Connection diagram
Connection example
11/08/2019 Page 4 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Block diagram
Internal wiring of the terminal points
11/08/2019 Page 5 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Diagram
Maximum energy consumption of the outputs when switching off inductive loads
The diagram shows the maximum amount of energy that may be fed back into the corresponding output groups (outputs 1 to 4, 5 to 8, 9 to 12, 13 to 16)
for each switch off procedure when switching off an inductive load without external freewheeling circuit.
The current data refers to the ohmic DC voltage component of the inductive load.
Note: Restrict freewheeling voltage to a maximum of -15 V when using an external freewheeling circuit. The external freewheeling circuit has no
function in the event of a higher negative voltage.
11/08/2019 Page 6 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Dimensional drawing
Classifications
eCl@ss
eCl@ss 4.0
27240400
eCl@ss 4.1
27240400
eCl@ss 5.0
27242200
eCl@ss 5.1
27242600
eCl@ss 6.0
27242600
eCl@ss 7.0
27242604
eCl@ss 8.0
27242604
eCl@ss 9.0
27242604
11/08/2019 Page 7 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Classifications
ETIM
ETIM 3.0
EC001599
ETIM 4.0
EC001599
ETIM 5.0
EC001599
ETIM 6.0
EC001599
ETIM 7.0
EC001599
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
39121311
UNSPSC 12.01
39121311
UNSPSC 13.2
32151602
Approvals
Approvals
Approvals
DNV GL / UL Listed / cUL Listed / NK / ABS / DNV GL / RINA / KR / LR / KR / NK / ABS / BSH / RINA / UL Listed / cUL Listed / EAC / EAC / PRS / BV
Ex Approvals
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAA00000DF
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
11/08/2019 Page 8 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Approvals
NK
ABS
http://www.classnk.or.jp/hp/en/
14A006
http://www.eagle.org/eagleExternalPortalWEB/
18-HG1767360-PDA
DNV GL
https://approvalfinder.dnvgl.com/
TAA00000DF
RINA
http://www.rina.org/en
ELE256518XG
KR
http://www.krs.co.kr/eng/main/main.aspx
HMB17372-AC002
LR
http://www.lr.org/en
14-20019
KR
http://www.krs.co.kr/eng/main/main.aspx
HMB17372-AC002
NK
http://www.classnk.or.jp/hp/en/
14A006
ABS
http://www.eagle.org/eagleExternalPortalWEB/
18-HG1767360-PDA
BSH
http://www.bsh.de/de/index.jsp
840
http://www.rina.org/en
ELE256518XG
RINA
11/08/2019 Page 9 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Approvals
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
EAC
EAC-Zulassung
EAC
EAC-Zulassung
PRS
http://www.prs.pl/
TE/2239/880590/19
BV
http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials
36433/B0 BV
Accessories
Accessories
Device marking
Insert label - EMT (35X28)R - 0801602
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker
carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500
DIN rail connector
11/08/2019 Page 10 / 11
https://www.phoenixcontact.com/us/products/2688349
I/O module - AXL F DO16/1 1H - 2688349
Accessories
Bus connector - AXL F BS H - 2700992
Axioline F bus base module for housing type H
Terminal marking
Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579
Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with
B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER
Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5
mm, Number of individual labels: 50
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/08/2019 Page 11 / 11
