2688491

https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F, Analog input module, Analog inputs: 4, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection method: 2, 3, 4-wire, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of protection: IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline F station. It is used to acquire analog current signals. Your advantages  4 analog, bipolar input channels for the connection of current signals  Connection of sensors in 2, 3, and 4-wire technology  Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA, ±20 mA  Simultaneous scanning of all channels by means of simultaneous sampling  High crosstalk attenuation between the channels, thanks to separate signal paths  Particularly robust against electromagnetic interference  Device rating plate stored Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356744225 Weight per Piece (excluding packing) 200.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions 10/20/2019   Page 1 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Technical data Dimensions Width 35 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 195.9 g Note on weight specifications with connectors and bus base module Interfaces Designation Axioline F local bus No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials Designation Axioline F local bus supply (UBus) 10/20/2019   Page 2 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Technical data Axioline potentials Supply voltage 5 V DC (via bus base module) Current consumption typ. 120 mA max. 150 mA Designation Supply for analog modules (UA) Supply voltage 24 V DC (I/O supply and sensor supply) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption max. 45 mA (IiS = 0 mA) typ. 118 mA (IiS = 4 x 20 mA (nominal load)) max. 125 mA (IiS = 4 x 20 mA (nominal load)) typ. 238 mA (IiS = 4 x 50 mA (full load)) max. 245 mA (IiS = 4 x 50 mA (full load)) Power consumption typ. 1.5 W (at UBus and UA) max. 1.83 W (at UBus and UA) Type of protection Surge protection of the supply voltage Polarity reversal protection of the supply voltage Transient protection supply voltage Analog inputs Description of the input Differential inputs, current Input name Analog inputs Number of inputs 4 Connection method Push-in connection Connection technology 2, 3, 4-wire Note regarding the connection technology shielded A/D conversion time 31.25 µs Resolution A/D 16 bit Limit frequency (3 dB) 30 Hz 12 kHz Type of protection Transient protection of inputs Overload protection of the inputs Data formats IB IL, S7-compatible Measured value representation 16 bits (15 bits + sign bit) Current input signal 0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA Input resistance current input 104 Ω (typical) Input filter 30 Hz, 12 kHz and mean-value generation (can be parameterized) 10/20/2019   Page 3 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Technical data Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/analog inputs 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O)/analog inputs 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Analog inputs/functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 10/20/2019   Page 4 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Connection diagram Differential current input with passive 2-wire transmitter (current loop) 10/20/2019   Page 5 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Connection diagram Differential current input with passive 2-wire transmitter (current loop) 10/20/2019   Page 6 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Connection diagram Passive pressure sensor at a differential current input 10/20/2019   Page 7 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Connection diagram Connection for current measurment 10/20/2019   Page 8 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Block diagram Internal wiring of the terminal points 10/20/2019   Page 9 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 10/20/2019   Page 10 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Classifications ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 Approvals Approvals Approvals DNV GL / PRS / BV / LR / KR / ABS / BSH / RINA / UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAA00000DF PRS    http://www.prs.pl/  TE/2239/880590/19 BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  36433/B0 BV 10/20/2019   Page 11 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Approvals LR    http://www.lr.org/en  14-20019 KR    http://www.krs.co.kr/eng/main/main.aspx  HMB17372-AC002 ABS   http://www.eagle.org/eagleExternalPortalWEB/  18-HG1767360-PDA BSH   http://www.bsh.de/de/index.jsp  840 RINA    http://www.rina.org/en  ELE256518XG UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      EAC-Zulassung cULus Listed       Accessories Accessories Device marking 10/20/2019   Page 12 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Accessories Insert label - EMT (35X28)R - 0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500     DIN rail connector Bus connector - AXL F BS H - 2700992 Axioline F bus base module for housing type H     Shield connection Shield connection - AXL SHIELD SET - 2700518 Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)     Terminal marking Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     10/20/2019   Page 13 / 14 https://www.phoenixcontact.com/us/products/2688491 I/O module - AXL F AI4 I 1H - 2688491 Accessories Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 10/20/2019   Page 14 / 14