https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Axioline F, Analog input module, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, connection
method: 2, 3, 4-wire, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of
protection: IP20, including bus base module and Axioline F connectors
Product Description
The module is designed for use within an Axioline F station.
It is used to acquire analog voltage signals.
Your advantages
4 analog, bipolar input channels for the connection of voltage signals
Connection of sensors in 2, 3, and 4-wire technology
Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V
Simultaneous scanning of all channels by means of simultaneous sampling
High crosstalk attenuation between the channels, thanks to separate signal paths
Particularly robust against electromagnetic interference
Device rating plate stored
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356744232
Weight per Piece (excluding packing)
200.000 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Dimensions
09/08/2019 Page 1 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Technical data
Dimensions
Width
35 mm
Height
126.1 mm
Depth
54 mm
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to
EN 60715).
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
Connection data
Designation
Axioline F connector
Connection method
Push-in connection
Note on the connection method
Please observe the information provided on conductor cross sections in
the “Axioline F: system and installation” user manual.
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Stripping length
8 mm
General
Mounting type
DIN rail
Net weight
191 g
Note on weight specifications
with connectors and bus base module
Interfaces
Designation
Axioline F local bus
No. of channels
2
Connection method
Bus base module
Transmission speed
100 Mbps
Axioline potentials
Designation
Axioline F local bus supply (UBus)
09/08/2019 Page 2 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Technical data
Axioline potentials
Supply voltage
5 V DC (via bus base module)
Current consumption
typ. 120 mA
max. 150 mA
Power consumption
typ. 0.6 W
max. 0.75 W
Designation
Supply for analog modules (UA)
Supply voltage
24 V DC (I/O supply and sensor supply)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
max. 45 mA (IiS = 0 mA)
typ. 118 mA (IiS = 4 x 20 mA (nominal load))
max. 125 mA (IiS = 4 x 20 mA (nominal load))
typ. 238 mA (IiS = 4 x 50 mA (full load))
max. 245 mA (IiS = 4 x 50 mA (full load))
Power consumption
typ. 1.5 W (at UBus and UA)
max. 1.83 W (at UBus and UA)
Type of protection
Surge protection of the supply voltage
Polarity reversal protection of the supply voltage
Transient protection supply voltage
Analog inputs
Description of the input
Differential inputs, voltage
Input name
Analog inputs
Number of inputs
4
Connection method
Push-in connection
Connection technology
2, 3, 4-wire
Note regarding the connection technology
shielded, twisted pair
A/D conversion time
31.25 µs
Resolution A/D
16 bit
Limit frequency (3 dB)
30 Hz
12 kHz
Type of protection
Transient protection of inputs
Overload protection of the voltage inputs
Data formats
IB IL, S7-compatible
Measured value representation
16 bits (15 bits + sign bit)
Voltage input signal
0 V ... 5 V
-5 V ... 5 V
0 V ... 10 V
09/08/2019 Page 3 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Technical data
Analog inputs
-10 V ... 10 V
Input resistance of voltage input
268 kΩ (typical)
Common mode voltage range signal - ground
-50 V DC ... 50 V DC
Input filter
30 Hz, 12 kHz and mean-value generation (can be parameterized)
Electrical isolation
Test section
5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1
min.
5 V supply (logic)/analog inputs 500 V AC 50 Hz 1 min.
5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min.
24 V supply (I/O)/analog inputs 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min.
Analog inputs/functional earth ground 500 V AC 50 Hz 1 min.
Standards and Regulations
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
09/08/2019 Page 4 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Connection diagram
Connector for voltage measurement
09/08/2019 Page 5 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Block diagram
09/08/2019 Page 6 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Dimensional drawing
Classifications
eCl@ss
eCl@ss 4.0
27240400
eCl@ss 4.1
27240400
eCl@ss 5.0
27242200
eCl@ss 5.1
27242600
eCl@ss 6.0
27242600
eCl@ss 7.0
27242601
eCl@ss 8.0
27242601
eCl@ss 9.0
27242601
09/08/2019 Page 7 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Classifications
ETIM
ETIM 3.0
EC001599
ETIM 4.0
EC001599
ETIM 5.0
EC001596
ETIM 6.0
EC001596
ETIM 7.0
EC001596
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
39121311
UNSPSC 12.01
39121311
UNSPSC 13.2
32151602
Approvals
Approvals
Approvals
DNV GL / PRS / BV / LR / KR / ABS / BSH / RINA / UL Listed / cUL Listed / cULus Listed
Ex Approvals
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAA00000DF
PRS
http://www.prs.pl/
TE/2239/880590/19
BV
http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials
36433/B0 BV
09/08/2019 Page 8 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Approvals
LR
http://www.lr.org/en
14-20019
KR
http://www.krs.co.kr/eng/main/main.aspx
HMB17372-AC002
ABS
http://www.eagle.org/eagleExternalPortalWEB/
18-HG1767360-PDA
BSH
http://www.bsh.de/de/index.jsp
840
RINA
http://www.rina.org/en
ELE256518XG
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cULus Listed
Accessories
Accessories
Device marking
Insert label - EMT (35X28)R - 0801602
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker
carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500
09/08/2019 Page 9 / 10
https://www.phoenixcontact.com/us/products/2688501
I/O module - AXL F AI4 U 1H - 2688501
Accessories
DIN rail connector
Bus connector - AXL F BS H - 2700992
Axioline F bus base module for housing type H
Shield connection
Shield connection - AXL SHIELD SET - 2700518
Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)
Terminal marking
Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579
Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with
B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER
Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5
mm, Number of individual labels: 50
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/08/2019 Page 10 / 10