2688527

https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F, Analog output module, Analog outputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, connection method: 2-wire, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline F station. It is used to output analog voltage and current signals. Your advantages  4 analog output channels for the connection of either voltage or current signals  Bipolar voltage outputs, unipolar current outputs  Connection of actuators in 2-wire technology  Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V  Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA  Short-circuit-proof outputs  No derating in all ranges  Short signal rise times  Driving of high loads  Device rating plate stored Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356744256 Weight per Piece (excluding packing) 200.000 g Custom tariff number 85389091 Country of origin Germany 09/08/2019   Page 1 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Technical data Dimensions Width 35 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 145 g Note on weight specifications with connectors and bus base module Interfaces Designation Axioline F local bus No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials 09/08/2019   Page 2 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Technical data Axioline potentials Designation Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) Current consumption typ. 120 mA max. 150 mA Designation Supply for analog modules (UA) Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption typ. 60 mA (4 voltage channels, 10 V output) max. 85 mA (4 voltage channels, 10 V output) max. 110 mA (4 current channels, 20 mA output, 500 Ω load) max. 125 mA (4 current channels, 24 mA output, 500 Ω load) Power consumption max. 3 W (at UA) typ. 2.04 W (at UBus and UA) max. 3.75 W (at UBus and UA) Type of protection Surge protection of the supply voltage Polarity reversal protection of the supply voltage Transient protection Analog outputs Number of outputs 4 Connection method Push-in connection Connection technology 2-wire Note regarding the connection technology shielded, twisted pair Output name Analog outputs D/A resolution 16 bit Type of protection Short-circuit and overload protection Transient protection Protective circuit/component electronic Suppressor diode Data formats IB IL, S7-compatible Representation of output values 16 bits (15 bits + sign) Process data update 140 µs Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Load/output load current output ≤ 500 Ω Voltage output signal 0 V ... 5 V -5 V ... 5 V 09/08/2019   Page 3 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Technical data Analog outputs 0 V ... 10 V -10 V ... 10 V Load/output load voltage output ≥ 1 kΩ Precision typ. 0.1 % (of output range final value) Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/analog outputs 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O)/analog outputs 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Analog outputs/functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 09/08/2019   Page 4 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Connection diagram Connection for voltage and current output 09/08/2019   Page 5 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Block diagram Internal wiring of the terminal points 09/08/2019   Page 6 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 09/08/2019   Page 7 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Classifications ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 Approvals Approvals Approvals DNV GL / KR / NK / ABS / BSH / RINA / UL Listed / cUL Listed / EAC / LR / PRS / BV / cULus Listed Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAA00000DF KR    http://www.krs.co.kr/eng/main/main.aspx  HMB17372-AC002 NK    http://www.classnk.or.jp/hp/en/  14A006 ABS   http://www.eagle.org/eagleExternalPortalWEB/  18-HG1767360-PDA 09/08/2019   Page 8 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Approvals BSH   http://www.bsh.de/de/index.jsp  840 RINA    http://www.rina.org/en  ELE256518XG UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      EAC-Zulassung LR    http://www.lr.org/en  14-20019 PRS    http://www.prs.pl/  TE/2239/880590/19 BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  36433/B0 BV cULus Listed       Accessories Accessories Device marking 09/08/2019   Page 9 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Accessories Insert label - EMT (35X28)R - 0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500     DIN rail connector Bus connector - AXL F BS H - 2700992 Axioline F bus base module for housing type H     Shield connection Shield connection - AXL SHIELD SET - 2700518 Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)     Terminal marking Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     09/08/2019   Page 10 / 11 https://www.phoenixcontact.com/us/products/2688527 I/O module - AXL F AO4 1H - 2688527 Accessories Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/08/2019   Page 11 / 11