2688556

https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F, Temperature recording module, Analog inputs: 4 (for resistance temperature detectors), connection method: 2, 3, 4-wire (shielded), transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline F station. It is used to acquire signals from resistive temperature sensors. The module supports all common platinum sensors in accordance with DIN EN 60751 and SAMA, as well as nickel sensors in accordance with DIN 43760. Cu10, Cu50, Cu53 sensors as well as various KTY8x sensor types are also supported. Your advantages  4 analog input channels for connecting resistance temperature detectors (RTDs)  500 Ω and 5 kΩ linear inputs  Connection of sensors in 2, 3, and 4-wire technology  Integrated, digital sensor linearization  Standardized measured value representation directly in °C, °F or Ω  Measured value display in 16-bit format or floating point format  Programmable filters  Short-circuit protected inputs  Device rating plate stored  Temperature stability  Very high level of noise immunity  Low noise emission  Installation monitoring by means of “Channel scout” function Key Commercial Data Packing unit 1 pc GTIN 11/08/2019   Page 1 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 GTIN 4046356744201 Weight per Piece (excluding packing) 200.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Caption Dimensional drawing Width 35 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 144 g Note on weight specifications with connectors and bus base module Interfaces 11/08/2019   Page 2 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Technical data Interfaces Designation Axioline F local bus No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps Axioline potentials Designation Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) Current consumption max. 140 mA Power consumption max. 700 mW Designation Supply for analog modules (UA) Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption max. 17 mA Power consumption max. 400 mW max. 1.1 W (at UBus and UA) Type of protection Surge protection of the supply voltage Polarity reversal protection of the supply voltage Transient protection Analog inputs Number of inputs 4 (for resistance temperature detectors) Input name Analog inputs Description of the input Inputs for resistive temperature sensors Connection method Push-in connection Connection technology 2, 3, 4-wire (shielded) Sensor types (RTD) that can be used Pt, Ni, KTY, Cu sensors Linear resistance measuring range 0 Ω ... 500 Ω 0 kΩ ... 5 kΩ Nominal value of the current sources 1 mA (Pt 100, Ni 100, RLin 500 Ω; pulse current, the specification is valid during the sampling phase) Measured value representation 16 bits (15 bits + sign bit) Resolution A/D 24 bit Type of protection Short-circuit protection, overload protection of the inputs Transient protection of inputs Transient protection of sensor supplies Data formats IB IL, S7-compatible Input filter time 40 ms 11/08/2019   Page 3 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Technical data Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance REACh SVHC Lead 7439-92-1 Drawings Connection diagram Connection example: 4-wire connection 11/08/2019   Page 4 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Connection diagram Connection example: 3-wire connection Connection diagram Connection example: 2-wire connection 11/08/2019   Page 5 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Connection diagram Connection example: 4-wire connection for 3-wire sensor with very long supply lines (> 100 m) 11/08/2019   Page 6 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Block diagram Internal wiring of the terminal points 11/08/2019   Page 7 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Dimensional drawing Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 11/08/2019   Page 8 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Classifications ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 Approvals Approvals Approvals DNV GL / KR / NK / ABS / BSH / RINA / UL Listed / cUL Listed / LR / PRS / BV / cULus Listed Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/  TAA00000DF KR    http://www.krs.co.kr/eng/main/main.aspx  HMB17372-AC002 NK    http://www.classnk.or.jp/hp/en/  14A006 ABS   http://www.eagle.org/eagleExternalPortalWEB/  18-HG1767360-PDA 11/08/2019   Page 9 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Approvals BSH   http://www.bsh.de/de/index.jsp  840 RINA    http://www.rina.org/en  ELE256518XG UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 LR    http://www.lr.org/en  14-20019 PRS    http://www.prs.pl/  TE/2239/880590/19 BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  36433/B0 BV cULus Listed       Accessories Accessories Device marking 11/08/2019   Page 10 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Accessories Insert label - EMT (35X28)R - 0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500     DIN rail connector Bus connector - AXL F BS H - 2700992 Axioline F bus base module for housing type H     Shield connection Shield connection - AXL SHIELD SET - 2700518 Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)     Terminal marking Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     11/08/2019   Page 11 / 12 https://www.phoenixcontact.com/us/products/2688556 I/O module - AXL F RTD4 1H - 2688556 Accessories Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/08/2019   Page 12 / 12