https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
®
Axioline F, Bus coupler, EtherCAT , RJ45 socket, transmission speed in the local bus: 100 Mbps, degree of
protection: IP20, including bus base module and Axioline F connector
Product Description
®
The bus coupler is intended for use within an EtherCAT network and represents the link to the Axioline F I/O system.
Up to 63 Axioline F devices can be connected to the bus coupler.
®
EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Auotmation GmbH, Germany.
A corresponding ESI file is available for integrating the Axioline F station into the programming system.
This file can be downloaded via the product at phoenixcontact.net/products.
Why buy this product
2 RJ45 connections
Rotary encoding switch
Automatic addressing
®
Station mapped as a modular EtherCAT device using a modular device profile (MDP)
Station can be mapped as a block device
Acyclic data communication (mailbox protocols)
Cyclic (synchronous) data communication
Firmware can be updated
Typical cycle time of the Axioline F local bus is around 10 μs
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356658355
Weight per Piece (excluding packing)
220.000 g
Custom tariff number
85176200
Country of origin
Germany
01/10/2018 Page 1 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Technical data
Dimensions
Width
45 mm
Height
126.1 mm
Depth
74 mm
Note on dimensions
The depth is valid when a TH 35-7.5 DIN rail is used (according to
EN 60715).
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
-25 °C ... 55 °C (Mounting position: any)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
Connection data
Designation
Axioline F connector
Connection method
Push-in connection
Note on the connection method
Please observe the information provided on conductor cross sections in
the “Axioline F: system and installation” user manual.
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Stripping length
8 mm
General
Mounting type
DIN rail
Net weight
219.9 g
Note on weight specifications
with connector and bus base module
Diagnostics messages
Emergency messages
Messages via object 10F3hex Diagnosis history
Interfaces
Designation
EtherCAT
No. of channels
2
®
01/10/2018 Page 2 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Technical data
Interfaces
Connection method
RJ45 socket
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
100 Mbps (Full duplex)
Transmission physics
Ethernet in RJ45 twisted pair
Designation
Axioline F local bus
Connection method
Bus base module
Transmission speed
100 Mbps
Designation
Service
Connection method
Micro USB type B
System limits of the bus coupler
Amount of process data
1024 Byte (for each data direction)
Number of supported devices
max. 63 (per station)
Number of local bus devices that can be connected
max. 63
Designation
EtherCAT
System-specific protocols
Mailbox protocols CAN application protocol over EtherCAT
®
®
®
Mailbox protocols File access over EtherCAT
Type of addressing
Auto-increment addressing
Fixed position addressing
Logical addressing
Explicit device ID
Specification
ETG.1000 V1.02
Axioline potentials
Designation
Communications power UL feed-in (the supply of the Axioline F local bus
UBus is generated from UL)
Supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
max. 570 mA (with 2 A at UBus for the I/Os and UL = 24 V)
Power consumption
max. 13.7 W (with 2 A load at UBus for the I/Os)
Designation
Supply of the Axioline F local bus UBus
Supply voltage
5 V DC (via bus base module)
Power supply unit
2A
Type of protection
Surge protection of the supply voltage
Polarity reversal protection of the supply voltage
Standards and Regulations
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g
01/10/2018 Page 3 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Technical data
Standards and Regulations
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Connection diagram
Block diagram
RUN
EtherCAT
FE
®
EtherCAT
RDY
!
ERR
RJ45
RUN
ERR
D
RDY
D
E
5V
E
3.3V
0 2
4 6
8 10
S1
12 14
RJ45
X10
FE
0 2
4 6
S2
89
X1
Service
"C
Reset
Local bus
UBus
UL
3.3 V
UBus
24 V
UL
24 V
Internal wiring of the terminal points
Dimensional drawing
74
122,4
45
126,1
UL
24 V DC +
(UL)
01/10/2018 Page 4 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Classifications
eCl@ss
eCl@ss 4.0
27240490
eCl@ss 4.1
27240490
eCl@ss 5.0
27242208
eCl@ss 5.1
27242608
eCl@ss 6.0
27242608
eCl@ss 7.0
27242608
eCl@ss 8.0
27242608
eCl@ss 9.0
27242608
ETIM
ETIM 3.0
EC001604
ETIM 4.0
EC001604
ETIM 5.0
EC001604
ETIM 6.0
EC001604
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
39121311
UNSPSC 12.01
39121311
UNSPSC 13.2
32151602
Approvals
Approvals
Approvals
UL Listed / cUL Listed / EtherCAT / BSH / RINA / NK / BSH / DNV GL / ABS / KR / cULus Listed
Ex Approvals
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
01/10/2018 Page 5 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Approvals
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
EtherCAT
0x290783
BSH
http://www.bsh.de/de/index.jsp
840
RINA
http://www.rina.org/en
ELE0078216XG
NK
http://www.classnk.or.jp/hp/en/
14A006
BSH
http://www.bsh.de/de/index.jsp
840
DNV GL
http://exchange.dnv.com/tari/
TAA00000DF
ABS
http://www.eagle.org/eagleExternalPortalWEB/
17-HG1669996-PDA
KR
http://www.krs.co.kr/eng/main/main.aspx
HMB17372-AC002
cULus Listed
Accessories
Accessories
Data cable by the meter
Cable - FL CAT5 HEAVY - 2744814
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm², solid conductor,
shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter
01/10/2018 Page 6 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Accessories
Network cable - FL CAT5 FLEX - 2744830
CAT5-SF/UTP cable (J-LI02YS(ST)C H 2 x 2 x 26 AWG), light-duty, flexible installation cable 2 x 2 x 0.14 mm², stranded,
shielded, outer sheath: 5.75 mm ± 0.15 mm diameter
Device marking
Insert label - EMT (35X18,7)R - 0801831
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: snapped into
marker carrier, lettering field size: 35 x 18.7 mm
DIN rail connector
Bus connector - AXL BS BK - 2701422
Axioline F bus base module for housing type BK
Plug
Plug - AXL CN S/UL - 2701421
Axioline F short power connector (for e.g., AXL F BK ...)
01/10/2018 Page 7 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Accessories
RJ45 connector - FL PLUG RJ45 GR/2 - 2744856
RJ45 connector, shielded, with bend protection sleeve, 2 pieces, gray for straight cables, for assembly on site. For
connections that are not crossed, it is recommended that you use the connector set with gray bend protection sleeve.
RJ45 connector - FL PLUG RJ45 GN/2 - 2744571
RJ45 connector, shielded, with bend protection sleeve, 2 pieces, green for crossed cables, for assembly on site. For
connections that are crossed, it is recommended that the connector set with green bend protection sleeves is used.
Programming cable
Connecting cable - CAB-USB A/MICRO USB B/2,0M - 2701626
Connecting cable, for connecting the controller to a PC for PC Worx and LOGIC+, USB A to micro USB B, 2 m in length.
Terminal marking
Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579
Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with
B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER
Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580
Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual labeling with M-PEN 0,8, X-PEN, or CMS-P1PLOTTER
01/10/2018 Page 8 / 9
https://www.phoenixcontact.com/us/products/2688899
Bus coupler - AXL F BK EC - 2688899
Accessories
Universal tools
Assembly tool - FL CRIMPTOOL - 2744869
Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45..., for assembly on site
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
01/10/2018 Page 9 / 9