https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Inline IO-Link master, complete with accessories (connector and labeling field), 4 IO-Link ports, 12 digital inputs,
24 V DC, 2, 3-wire connection method
Product Description
The terminal is designed for use within an Inline station.
The terminal is used to operate IO-Link-compatible sensors and actuators (devices). It is also used to acquire digital signals.
IO-Link is the standard for consistent communication from the controller to the lowest field level. In IO-Link communication, the process data is
forwarded during parallel service data transmission.
IO-Link is a point-to-point connection between an IO-Link port and the sensor or actuator. IO-Link technology uses the familiar signal technology of
the 0 V and 24 V binary interface in order to transmit data using pulse modulation. IO-Link offers full backward compatibility with standard sensors/
actuators.
Using this terminal, IO-Link-compatible devices from any manufacturer can be operated on INTERBUS, PROFIBUS, and PROFINET.
Your advantages
4 type A IO-Link ports
Optional use of the IO-Link ports in SIO mode as standard inputs or standard outputs
Connections for 12 digital sensors
Connection of sensors in 2 or 3-wire technology
IO-Link specification V1.0
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356412902
Weight per Piece (excluding packing)
240.000 g
Custom tariff number
85389091
Country of origin
Germany
09/06/2019 Page 1 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
48.8 mm
Height
119.8 mm
Depth
71.5 mm
Ambient conditions
Ambient temperature (operation)
-25 °C ... 55 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
General
Mounting type
DIN rail
Net weight
200 g
Note on weight specifications
with connectors
Diagnostics messages
Short-circuit of a digital output in the SIO mode Yes
Sensor supply short-circuit No
Sensor supply overload No
Interfaces
Designation
Inline local bus
No. of channels
2
Connection method
Inline data jumper
Transmission speed
500 kbps
Inline potentials
Designation
Communications power (UL)
Supply voltage
7.5 V (via voltage jumper)
Current consumption
max. 100 mA
Designation
Segment circuit supply (US)
Supply voltage
24 V DC (via voltage jumper)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
max. 2 A (with load and port supply)
max. 52 mA (without load)
09/06/2019 Page 2 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Technical data
Digital inputs
Input name
Digital inputs
Description of the input
IEC 61131-2 type 1
Connection method
Inline connector
Connection technology
3-wire
Number of inputs
12
Input voltage range "0" signal
< 5 V (typ.)
Input voltage range "1" signal
> 11 V DC (typ.)
Input voltage range
0 V DC ... 30 V DC
Nominal input current at UIN
2.2 mA
Delay at signal change from 0 to 1
3 ms
Delay at signal change from 1 to 0
3 ms
Input name
Digital inputs
Connection method
Inline connector
Number of inputs
max. 4
Nominal input current
5.5 mA (at 24 V DC)
Signal delay
3 ms
3 ms
Permissible cable length
20 m
Digital outputs
Number of outputs
max. 4
Nominal current per channel
max. 200 mA (INominal)
Maximum total current consumption
max. 800 mA
Limitation of the voltage induced on circuit interruption
approx. -1 V
Type of protection
Short-circuit protection
Behavior with overload
Output may be damaged
Behavior in case of short-circuit
Short-circuit protection
Electrical isolation
Test section
24 V supply US (IO-Link and digital inputs) / functional earth ground 500
V DC 50 Hz 1 min.
24 V supply US (IO-Link and digital inputs) / 7.5 V supply (bus logic) 500
V DC 50 Hz 1 min.
7.5 V supply (bus logics) / functional earth ground 500 V DC 50 Hz 1 min.
Standards and Regulations
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
09/06/2019 Page 3 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Technical data
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Block diagram
Internal wiring of the terminal points
09/06/2019 Page 4 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Dimensional drawing
09/06/2019 Page 5 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Connection diagram
09/06/2019 Page 6 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Classifications
eCl@ss
eCl@ss 4.0
27250300
eCl@ss 4.1
27250300
eCl@ss 5.0
27250300
eCl@ss 5.1
27242600
eCl@ss 6.0
27242600
eCl@ss 7.0
27242604
eCl@ss 8.0
27242604
eCl@ss 9.0
27242604
ETIM
ETIM 2.0
EC001430
ETIM 3.0
EC001599
ETIM 4.0
EC001599
ETIM 5.0
EC001599
ETIM 6.0
EC001599
ETIM 7.0
EC001599
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 13.2
32151602
Accessories
Accessories
Connector set
Connector set - IB IL DI/DO 8-PLSET/CP - 2860963
Connector set, for IB IL DI/DO 8, copper, with color print.
I/O component
09/06/2019 Page 7 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Accessories
Inline terminal - IB IL PD 24V-PAC - 2862987
Inline terminal for power distribution (24 V), complete with accessories, (connector and labeling field) 24 V supply voltage
is fed out from the segment circuit (US)
Inline terminal - IB IL PD GND-PAC - 2862990
Inline terminal for power distribution (GND), complete with accessories, (connector and labeling field) connections for
GND
Labeling panel
Labeling field - IB IL FIELD 8 - 2727515
Labeling field, width: 48.8 mm
Labeling field - IB IL FIELD 2 - 2727501
Labeling field, width: 12.2 mm
Terminal marking
Insert strip - ESL 62X10 - 0809492
Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert,
lettering field size: 62 x 10 mm
09/06/2019 Page 8 / 9
https://www.phoenixcontact.com/us/products/2692717
Inline function terminal - IB IL 24 IOL 4 DI 12-PAC - 2692717
Accessories
Insert strip - ESL 62X46 - 0809502
Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert,
lettering field size: 62 x 46 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/06/2019 Page 9 / 9
很抱歉,暂时无法提供与“2692717”相匹配的价格&库存,您可以联系我们找货
免费人工找货