2700091

PSD-S CE-SM SPRING Connection element with spring-cage terminal blocks for base mounting Data sheet 7957_en_02 1 © PHOENIX CONTACT 2015-05-04 Description This connection element is provided as a component of a modular signal tower and facilitates the electrical connection of the signal tower. According to your requirements, a signal tower may comprise any combination of up to five signal elements. You may use up to five optical signal elements or up to four optical and one audible signal element. An audible signal element can be used as top element only. A bayonet locking system establishes the mechanical and electrical connection between the elements. Mounting elements for base or tube mounting can be used to mount the signal tower. Features – – – Connection element for the assembly on a mounting surface (base), an outlet box or an angle (see accessories) Spring-cage connection Degree of protection: IP65, when mounted Make sure you always use the latest documentation. It can be downloaded from the product at phoenixcontact.net/products. PSD-S CE-SM SPRING 2 Table of contents 1 Description .............................................................................................................................. 1 2 Table of contents ..................................................................................................................... 2 3 Ordering data .......................................................................................................................... 3 4 Technical data ......................................................................................................................... 3 5 Mounting the connection element............................................................................................ 4 6 Connecting the cables ............................................................................................................. 5 7 Example of a signal tower........................................................................................................ 5 8 Assembly notes for a signal tower ........................................................................................... 5 7957_en_02 PHOENIX CONTACT 2 PSD-S CE-SM SPRING 3 Ordering data Description Type Order No. Pcs./Pkt. Connection element with spring-cage terminal blocks for base mounting PSD-S CE-SM SPRING 2700091 1 Accessories Type Order No. Pcs./Pkt. Outlet box with lateral cable entry for floor and base mounting PSD-S ME OB 2700153 1 1 Angle for floor mounting, black PSD-S ME BR-SM 2700144 Angle for single-sided floor mounting, concealed cable routing, black PSD-S ME BR-SM/1S 2700160 1 Angle for two-sided floor mounting, concealed cable routing, black PSD-S ME BR-SM/2S 2700161 1 4 Technical data Ø 4,2 Dimensions (in mm) 21,5 18 3 16 Ø 70 26,5 Ø 69 Diameter 69 mm Height 27 mm General data Material PA-GF Color black Weight 75 g Ambient temperature (operation) -30 °C ... 50 °C Degree of protection IP65, when installed Mounting position any Mounting type Base mounting 7957_en_02 PHOENIX CONTACT 3 PSD-S CE-SM SPRING General data Connection Rubber seal pre-installed for each element Number of mountable signal elements max. 5 Scope of delivery End cover and seal Connection data (without ferrule) Connection method Spring-cage connection Conductor cross section, stranded 0.5 mm² ... 1.5 mm² Conductor cross section, stranded [AWG] 20 - 15 Stripping length 7 mm Connection data (With ferrule) Connection method Spring-cage connection Conductor cross section, stranded 0.25 mm² ... 1.5 mm² Conductor cross section, stranded [AWG] 23 - 15 Stripping length 7 mm Connection data (solid) Connection method Spring-cage connection Conductor cross section, solid 0.5 mm² ... 1.5 mm² Conductor cross section, solid [AWG] 20 - 15 Stripping length 7 mm Approvals / conformities Conformance with EMC directive 2004/108/EC and for low-voltage directive 2006/95/EC For the latest approvals, please visit phoenixcontact.net/products. 5 Mounting the connection element Install the connection element directly on a flat mounting surface, on a contact box or an angle. The possible options are indicated in the ordering data under accessories. For the mounting the connection element, proceed as described in the package slip. For the connection of cables, proceed as described in the package slip. Please refer to the package list for connection options. It is enclosed with the connection element and can be downloaded from the internet at phoenixcontact.net/products. 7957_en_02 PHOENIX CONTACT 4 PSD-S CE-SM SPRING 6 Connecting the cables 7 Example of a signal tower NOTE: When working on the connection element, disconnect the power to the signal tower! 1 4 5 3 2 0 2 3 1 Bild 1 4 Connections in the connection element Connection 0 1 2 3 4 5 Meaning Reference potential (GND, N) Control of the signal element 1 Control of the signal element 2 Control of the signal element 3 Control of the signal element 4 Control of the signal element 5 When using the audible elements "siren element, 7 tones..." or "voice output element", several control lines are needed for the audible element, as the case may be. In this case, please note the entries in the corresponding data sheet or in the package slip. Bild 2 Key: 1 Audible signal element 2 Optical signal element 3 Connection element 4 Assembly element 8 – – – 7957_en_02 Example of a signal tower Assembly notes for a signal tower Only use a maximum of five elements within a signal tower. Use only one audible element in a signal tower and position this element on top. When connecting the bayonet locking, please note the markings (see "Assembly of the individual elements" in the data sheets of the signal elements). PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany phoenixcontact.com 5