2700116

PSD-S OE LED RL ... LED rotating light element, 24 V AC/DC Data sheet 7952_en_02 1 © PHOENIX CONTACT 2012-01-12 Description This optical signal element is part of a modular signal tower. Features According to your requirements, a signal tower may comprise – any combination of up to five signal elements. You may use – up to five optical signal elements or up to four optical and one – audible signal element. LED rotating light element for 24 V AC/DC Colors: red and yellow Degree of protection: IP65, when installed or with cover An audible signal element can be used as top element only. A bayonet locking system establishes the mechanical and electrical connection between the elements. Connection elements with spring-cage or screw connection can be used for electrical connection of the signal tower. Mounting elements for base or tube mounting can be used to mount the signal tower. Make sure you always use the latest documentation. It can be downloaded from the product at www.phoenixcontact.net/catalog. PSD-S OE LED RL ... 2 Table of contents 1 Description .............................................................................................................................. 1 2 Table of contents ..................................................................................................................... 2 3 Ordering data .......................................................................................................................... 3 4 Technical data ......................................................................................................................... 3 5 Example of a signal tower........................................................................................................ 4 6 Assembly notes for a signal tower ........................................................................................... 4 7 Assembling the individual elements......................................................................................... 5 8 Example for signal tower dimensions ...................................................................................... 5 7952_en_02 PHOENIX CONTACT 2 PSD-S OE LED RL ... 3 Ordering data Description Type Order No. Pcs. / Pkt. LED rotating light element, 24 V AC/DC, red PSD-S OE LED RL RD 2700116 1 LED rotating light element, 24 V AC/DC, yellow PSD-S OE LED RL YE 2700125 1 4 Technical data Dimensions (in mm) 65,5 56 Ø70 Diameter 70 mm Height 65.5 mm General data Material Polycarbonate PC Calotte color :   PSD-S OE LED RL RD red Calotte color :   PSD-S OE LED RL YE yellow Weight 65 g Ambient temperature (operation) -20 °C ... 50 °C Degree of protection IP65, when installed or with cover Mounting position Any Connection Rubber seal pre-installed for each element Electrical data Input voltage 24 V AC/DC Inrush current max. 500 mA Current consumption ≤ 40 mA Optical signal type LED rotating light Source of light type LED Signal frequency Approx. 2 Hz Service life, electrical max. 100,000 h Operating time 100 % 7952_en_02 PHOENIX CONTACT 3 PSD-S OE LED RL ... Approvals / conformities Conformance with EMC Directive 2004/108/EC For the latest approvals, please visit www.phoenixcontact.net/catalog. 5 Example of a signal tower 6 Assembly notes for a signal tower – Only use a maximum of five elements within a signal tower. Use only one audible element in a signal tower and position this element on top. When closing the bayonet locking system, observe the markings (see "Assembling the individual elements"). – 1 – 2 3 4 Figure 1 Example of a signal tower Key: 1 Audible signal element 2 Optical signal element 3 Connection element 4 Assembly element 7952_en_02 PHOENIX CONTACT 4 PSD-S OE LED RL ... 7 Assembling the individual elements 8 Example for signal tower dimensions The following figure shows the dimensions of a typical signal tower. 3 1 ON 1 ON 2 2 3 3 1 2 3 56 ON 408 2 4 x 56 (= 224) 1 ON 2 3 1 2 3 86 ON 112 1 ON Figure 2 • • • Assembling the individual elements Select the elements for your application. Connect the elements to be assembled so that the mark- Figure 3 ings are aligned. Turn the upper element in the direction of the arrow. 7952_en_02 Ø70 Dimensions of a signal tower (example) PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany www.phoenixcontact.com 5