2700453

https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 24 V DC Nanoline base unit. Equipped with 8 digital inputs, 2 analog (0-10 V) inputs and 4 PNP digital output channels. Additional I/O channels can be added using a maximum of three I/O extension modules. Optional communication modules provide network or serial connectivity. Optional Operator Panel provides user interface. Programming is via nanoNavigator. Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 300.000 g Custom tariff number 85371099 Country of origin India Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 80.5 mm Height 103.5 mm Depth 60 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 90 % Supply Power supply connection Screw connection Supply voltage 24 V DC (Power available to the I/O and Communications modules) 01/10/2018   Page 1 / 7 https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Technical data Supply Supply voltage range 19.2 V DC ... 30 V DC Max. current consumption 250 mA Typical current consumption 100 mA Software interfaces Programming tool nanoNavigator 3 or above Digital inputs Input name Digital inputs Description of the input EN 61131-2 type 1 NPN/PNP Connection method Screw connection Number of inputs 8 Typical response time 60 µs (on) 70 µs (OFF) Input voltage range "0" signal 0 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Nominal input current at UIN 5 mA DC (On) Digital outputs Output name Digital outputs Output description PNP outputs Connection method Screw connection Number of outputs 4 Type of protection Short-circuit and overload protection Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module / terminal block 2A Nominal load, inductive 12 VA Nominal load, lamp 12 W Nominal load, ohmic 12 W General Mounting type DIN rail mounting Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 01/10/2018   Page 2 / 7 https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Dimensional drawing 80,5 60 PWR nanoLine RUN 2 103,5 1 Classifications eCl@ss eCl@ss 4.0 27250315 eCl@ss 4.1 27250315 eCl@ss 5.0 27242216 eCl@ss 5.1 27242216 eCl@ss 6.0 27242216 eCl@ss 7.0 27242216 eCl@ss 8.0 27242216 eCl@ss 9.0 27242216 ETIM ETIM 2.0 EC001417 ETIM 3.0 EC001417 ETIM 4.0 EC001417 ETIM 5.0 EC001417 ETIM 6.0 EC001417 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 39122329 Approvals Approvals 01/10/2018   Page 3 / 7 https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Approvals Approvals UL Listed / EAC Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      EAC-Zulassung Accessories Accessories Communication module nanoLC module - NLC-MOD-RS232 - 2701179 RS-232 connection for data transfer or software configuration     Option module - NLC-MOD-RS485 - 2701182 RS-485 connection for data transfer or software configuration     01/10/2018   Page 4 / 7 https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Accessories nanoLC module - NLC-MOD-USB - 2701195 Serial connection to PC's USB port for data transfer or software configuration     Communication module - NLC-COM-ENET-MB1 - 2701124 Ethernet communication module. Allows the Nanoline controller to be connected to an Ethernet, operating as a Modbus TCP Server.     Communication module - NLC-COM-GSM - 2701344 GSM communication module. Allows SMS messaging to and from the Nanoline controller when connected to the GSM network.     Cover Covering hood - NLC-MOD-CAP-PXC - 2701292 Replacement cover for slot 2 in base unit.     Covering hood - NLC-MOD-CAP - 2701289 Replacement cover for slot 1 in base unit.     01/10/2018   Page 5 / 7 https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Accessories Extension module I/O extension module - NLC-IO-06I-04QTP-01A - 2701072 I/O extension module for use with Nanoline base unit. Equipped with 6 digital input and 4 PNP digital output channels. A maximum of three I/O extension modules can be attached to a base unit.     I/O extension module - NLC-IO-06I-04QTN-01A - 2701085 I/O extension module for use with Nanoline base unit. Equipped with 6 digital input and 4 NPN digital output channels. A maximum of three I/O extension modules can be attached to a base unit.     I/O extension module - NLC-IO-03I-04QRD-05A - 2701328 I/O extension module for use with Nanoline 24 V DC base unit. Equipped with 3 digital input and 4, 5 A relay output channels. A maximum of three I/O extension modules can be attached to a base unit.     I/O extension module - NLC-IO-4AI - 2701098 I/O extension module for use with Nanoline base unit. Equipped with 4 analog input channels. A maximum of three I/O extension modules can be attached to a base unit.     I/O extension module - NLC-IO-2AI-2AO-01 - 2701040 I/O extension module for use with Nanoline base unit. Equipped with 2 analog input (0...10 V DC, -10...+10 V DC, 0/4...20 mA) and 2 analog output (0...10 V DC, 0/4...20 mA) channels. A maximum of three I/O extension modules can be attached to a base unit.     01/10/2018   Page 6 / 7 https://www.phoenixcontact.com/us/products/2700453 Base unit - NLC-055-024D-08I-04QTP-00A - 2700453 Accessories Mounting material Mounting kit - NLC-OP1-MKT - 2701140 Mounting kit     Operator interface Operator terminal - NLC-OP1-LCD-032-4X20 - 2701137 User interface for Nanoline controllers. Mounts directly on the base unit. Can be mounted remotely using the mounting kit.     Programming cable Cable - NLC-PC/SERIAL-CBL 2M - 2701234 Cable, serial, 9-pos. D-SUB to RJ11/12     Cable - NLC-PC/USB-CBL 2M - 2701247 Cable, serial     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 01/10/2018   Page 7 / 7