2700606

https://www.phoenixcontact.com/us/produkte/2700606 Safety module - IB IL 24 LPSDO 8 V2-PAC - 2700606 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Safety-related digital output module, IP20 protection, for the SafetyBridge system. The module has four safe digital outputs with two-channel occupancy or 8 safe digital outputs with single-channel occupancy Product description The safety module is an output module from the Inline product range and is used in a SafetyBridge system. The safety module can be used as a part of an Inline station at any point within an INTERBUS, PROFINET or PROFIBUS system. The transmission speed of the safety module can be set to 500 kbaud or 2 Mbaud using a switch. Only one transmission speed must be used uniformly within a station. The module has four safe digital outputs with two-channel occupancy or eight safe digital outputs with single-channel occupancy. In the SafetyBridge system, you can achieve the following safety integrity by using this safety module depending on the installation and parameterization: – up to category 4 according to EN 954-1 standard, – up to SIL 3 according to EN 61508 standard, – up to SIL CL 3 according to EN 62061 standard, – up to PL e according to EN ISO 13849-1 standard.   Product Features  Generation and monitoring of the SafetyBridge protocol  Processing of the parameterized safety logic Key commercial data GTIN Technical data Note: Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Interface Fieldbus system Lokalbus Name INTERBUS Connection method Inline data jumper Transmission speed 500 kbaud/2 Mbaud, can be selected Transmission speed 500 kBit/s / 2MBit/s Digital outputs 18.03.2013   Page 1 / 6 https://www.phoenixcontact.com/us/produkte/2700606 Safety module - IB IL 24 LPSDO 8 V2-PAC - 2700606 Technical data Digital outputs Output name Digital outputs Connection method Spring-cage connection Connection method 2, 3, 4-wire Number of outputs 4 (with two-channel assignment) Number of outputs 8 Protective circuit Overload protection, short-circuit protection of outputs Output voltage 24 V DC (US - 1 V) Nominal output voltage 24 V DC Output current max. 6 A (Total current of all outputs, -25 °C ... 50 °C) Output current max. 4 A (Total current of all outputs, >50 °C ... 55 °C) Maximum output current per channel 2A Maximum output current per group 3A Nominal load, inductive (see safety data) Nominal load, lamp (see safety data) Nominal load, ohmic (see safety data) Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC Communications power UL 7.5 V (via voltage jumper) Current consumption max. 230 mA (from the local bus) SafetyBridge properties Connection to I/O modules max. 5 (safe digital I/O modules) Logic memory 24 kByte General data Width 48.8 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions Weight 200 g Note on weight specifications with male connectors Mounting type DIN rail Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Permissible humidity (operation) 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) Permissible humidity (storage/transport) 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) 18.03.2013   Page 2 / 6 https://www.phoenixcontact.com/us/produkte/2700606 Safety module - IB IL 24 LPSDO 8 V2-PAC - 2700606 Technical data General data Air pressure (operation) 80 kPa ... 108 kPa (up to 2000 m above sea level) Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above mean sea level) Degree of protection IP20 Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min Test section 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min Test section 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min Test section 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Category according to EN 13849-1 4 Diagnostics messages Short-circuit / overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor Inline potential routing Communications power UL 7.5 V DC (see safety data) Current consumption from UL max. 230 mA (see safety data) Main circuit supply UM 24 V DC (see safety data) Supply voltage range UM 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption from UM typ. 30 mA (all outputs set including actuator current) Current consumption from UM max. 6.03 A Segment supply voltage US 24 V (see safety data) Classifications ETIM ETIM 2.0 EC001433 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001601 UNSPSC UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 39121311 UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 18.03.2013   Page 3 / 6 https://www.phoenixcontact.com/us/produkte/2700606 Safety module - IB IL 24 LPSDO 8 V2-PAC - 2700606 Classifications eCl@ss eCl@ss 4.0 27240404 eCl@ss 4.1 27240404 eCl@ss 5.0 27242204 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 Approvals Approvals Approvals UL Listed / cUL Listed / Functional Safety / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  Functional Safety  cULus Listed  Accessories Accessories 18.03.2013   Page 4 / 6 https://www.phoenixcontact.com/us/produkte/2700606 Safety module - IB IL 24 LPSDO 8 V2-PAC - 2700606 Accessories Marking Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Labeling field - IB IL FIELD 8 - 2727515 Labeling field, width: 48.8 mm     Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, Unlabeled, Can be labeled with: Office-Drucksysteme, Plotter: Laser printer, Mounting type: Insert, Lettering field: 62 x 10 mm     Insert strip - ESL 62X46 - 0809502 Insert strip, Sheet, white, Unlabeled, Can be labeled with: Office-Drucksysteme, Plotter: Laser printer, Mounting type: Insert, Lettering field: 62 x 46 mm     Plug/Adapter Connector set - IB IL 24 SDO 8-PLSET/CP - 2916927 Connector set (yellow), color coded, for safe SDO boards.     18.03.2013   Page 5 / 6 https://www.phoenixcontact.com/us/produkte/2700606 Safety module - IB IL 24 LPSDO 8 V2-PAC - 2700606 Accessories User manual - UM DE IB IL 24 SDO 8-PAC - 2888835 User Manual, German, for INTERBUS Safety output modules     User manual - UM EN IB IL 24 SDO 8-PAC - 2888864 User Manual, English for PLCopen-certified INTERBUS Safety function blocks     User manual - UM QS EN IB IL 24 PSDX - S7 - 2910648 User manual, English     User manual - UM QS DE IB IL 24 PSDX - S7 - 2910651 User manual, german     © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 18.03.2013   Page 6 / 6