2701152

https://www.phoenixcontact.com/us/products/2701152 Inline terminal - IB IL 24 DI 4-XC-PAC - 2701152 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline digital input terminal, version for extreme conditions, complete with accessories (connector plug and labeling field), 4 inputs, 24 V DC, 3-conductor connection technology Product description The terminal is designed for use within an Inline station. It is used to acquire digital input signals.   Product Features  4 digital inputs  Connection of sensors in 2 and 3-wire technology  Maximum permissible load current per sensor: 250 mA  Maximum permissible load current from the terminal: 1 A  Diagnostic and status indicators  Can be used under extreme ambient conditions  Coated PCBs  Extended temperature range T2 (-40°C ... +55°C)   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 100.0 GRM Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.2 mm 09/03/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2701152 Inline terminal - IB IL 24 DI 4-XC-PAC - 2701152 Technical data Dimensions Height 140.5 mm Depth 71.5 mm Note on dimensions Housing dimensions Ambient conditions Ambient temperature (operation) -40 °C ... 55 °C (See also the "Tested successfully: Use under extreme ambient conditions" section of the data sheet.) -40 °C ... 60 °C (At US < 24.5 V; see also the "Tested successfully: Use under extreme ambient conditions" section of the data sheet.) Ambient temperature (storage/transport) -40 °C ... 85 °C GRP_Temperature class T2 (-40°C ... 55°C, EN 50155) Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Weight 66 g Note on weight specifications with connector Mounting type DIN rail Operating mode Process data operation with 4 bits Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Supply current 40 mA Communications power UL 7.5 V (via voltage jumper) 09/03/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2701152 Inline terminal - IB IL 24 DI 4-XC-PAC - 2701152 Technical data Power supply for module electronics Current consumption max. 40 mA (from the local bus) Power consumption max. 0.3 W (at UL) Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 40 mA Segment supply voltage US 24 V DC (nominal value) Current consumption from US max. 1 A Power consumption max. 0.3 W (at UL) Digital inputs Input name Digital inputs Connection method Spring-cage connection 2, 3-wire Number of inputs 4 (EN 61131-2 type 1) Typical response time < 1 ms Input voltage 24 V DC (via voltage jumper) Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Nominal input current at UIN min. 3 mA (at nominal voltage) Classifications eCl@ss eCl@ss 4.0 27240404 eCl@ss 4.1 27240404 eCl@ss 5.0 27242204 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 ETIM ETIM 2.0 EC001433 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 09/03/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2701152 Inline terminal - IB IL 24 DI 4-XC-PAC - 2701152 Classifications UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 39121311 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  cULus Recognized  Drawings 09/03/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2701152 Inline terminal - IB IL 24 DI 4-XC-PAC - 2701152 Connection diagram Block diagram 1.1 IN 2 IN 1 +24 V 1.2 2.2 1.3 2.3 1.4 2.4 Local bus +24 V UL 2 1 OPC 2 IN 3 1.5 2.5 1.6 2.6 2 2 2 IN 4 +24 V +24 V 3 4 +24 V (US) +24 V (UM) Dimensioned drawing 140,5 71,5 119,8 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 09/03/2014   Page 5 / 5