2701217

https://www.phoenixcontact.com/us/products/2701217 Inline function terminal - IB IL TEMP 2 RTD-XC-PAC - 2701217 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline analog input terminal, extreme conditions version, complete with accessories (connector and labeling field), 2 inputs, RTD (resistance temperature detector), 2, 3, 4-conductor connection technology Product Description Using these analog input terminals, it is possible to measure signals from conventional thermocouples and resistance thermometers. The terminals are configured for connection to various types of sensors. The user can configure the different sensor characteristic curves himself via process data. It is thus possible to attain the best possible adaptations in very different applications. The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points. Product Features ■ ■ ■ ■ ■ ■ ■ Pt, Ni, Cu, KTY sensor types according to DIN and SAMA Measured value acquisition with 16-bit resolution Channel scout for optical channel identification Connection of sensors in 2, 3, and 4-wire technology Can be used under extreme ambient conditions Extended temperature range of -40°C ... +70°C (see “Tested successfully: use under extreme ambient conditions” in the data sheet) Coated PCBs Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 100.0 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.2 mm Height 136.8 mm 04/28/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/2701217 Inline function terminal - IB IL TEMP 2 RTD-XC-PAC - 2701217 Technical data Dimensions Depth 71.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C (Standard) -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 67 g Note on weight specifications with connector Interfaces Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Transmission physics Copper Inline potentials Communications power UL 7.5 V DC (via voltage jumper) Current consumption from UL max. 60 mA typ. 43 mA I/O supply voltage UANA 24 V DC Current consumption from UANA max. 18 mA typ. 11 mA Power consumption typ. 587 mW max. 882 mW Analog inputs Number of inputs 2 Input name Analog RTD inputs Description of the input Input for resistive temperature sensors Connection method Spring-cage connection 2, 3-conductor 04/28/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/2701217 Inline function terminal - IB IL TEMP 2 RTD-XC-PAC - 2701217 Technical data Analog inputs Sensor types (RTD) that can be used Pt, Ni, KTY, Cu sensors, linear resistors Linear resistance measuring range 0 Ω ... 400 Ω 0 Ω ... 4 kΩ Measuring principle Successive approximation Measured value representation 16 bits two's complement and other A/D conversion time typ. 120 µs (per channel) Resolution A/D 16 bit (15 bit + sign bit) Process data update 30 ms Standards and Regulations Test section 7.5 V supply (bus logics)/24 V analog supply (analog I/O) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics) / functional earth ground 500 V AC 50 Hz 1 min. 24 V analog supply (analog I/O) / functional earth ground 500 V AC 50 Hz 1 min. Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250303 eCl@ss 4.1 27250303 eCl@ss 5.0 27250303 eCl@ss 5.1 27242601 eCl@ss 6.0 27242601 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 ETIM ETIM 3.0 EC001596 ETIM 4.0 EC001599 ETIM 5.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 04/28/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/2701217 Inline function terminal - IB IL TEMP 2 RTD-XC-PAC - 2701217 Classifications UNSPSC UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  cULus Recognized  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/28/2016   Page 4 / 4