2701232

https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F analog input module, extreme conditions version, 8 inputs: 0 - 10 V, ±10 V, 0 - 20 mA, 4 - 20 mA, ±20 mA, 2-conductor connection technology (including bus base module and connectors) The figure shows the standard item Product Description The module is designed for use within an Axioline F station. It is used to acquire analog voltage and current signals. Why buy this product  8 analog, bipolar input channels for the connection of either voltage or current signals  Connection of sensors in 2-wire technology  Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V  Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA, ±20 mA  Device rating plate stored  Diagnostic and status indicators  Can be used under extreme ambient conditions  Extended temperature range of -40°C ... +70°C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)  Partially coated PCBs Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356730495 Weight per Piece (excluding packing) 260.000 g Custom tariff number 85389091 Country of origin Germany 04/13/2017   Page 1 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 53.6 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7.5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C (Standard) -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 204 g Note on weight specifications with connectors and bus base module Interfaces Designation Axioline F local bus Connection method Bus base module Transmission speed 100 Mbps Power supply for module electronics Connection method Push-in connection Note on connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Axioline potentials Communications power UBus 5 V DC (via bus base module) Current consumption from UBus typ. 105 mA max. 130 mA Supply for analog modules UA 24 V DC 04/13/2017   Page 2 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Technical data Axioline potentials Current consumption from UA typ. 35 mA max. 45 mA (IiS = 0 mA) Analog inputs Description of the input Differential inputs, voltage or current can be chosen separately Input name Analog inputs Number of inputs 8 Connection method Push-in connection Connection technology 2-wire Note regarding the connection technology Shielded, twisted pair A/D conversion time 2 µs Resolution A/D 16 bit Limit frequency (3 dB) 30 Hz 12 kHz (in fast mode) Type of protection Transient protection of inputs Protective circuit/component Suppressor diode Data formats IB IL, S7-compatible Measured value representation 16 bits (15 bits + sign bit) Current input signal 0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA Input resistance current input 104 Ω (typical) Voltage input signal 0 V ... 5 V -5 V ... 5 V 0 V ... 10 V -10 V ... 10 V Input resistance of voltage input 268 kΩ (typical) Common mode voltage range signal - ground -50 V DC ... 50 V DC Filtering RFI filtering / passive TP 1st order Input filter 30 Hz, 12 kHz and mean-value generation (can be parameterized) Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g 04/13/2017   Page 3 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Technical data Standards and Regulations Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Connection diagram Dimensional drawing 53,6 02 03 04 05 06 07 10 11 12 13 14 15 16 17 20 21 22 23 24 25 26 27 30 31 32 33 34 35 36 37 54 I I 126,1 U 01 122,4 U 00 Connection for voltage and current measurement Connection diagram U1+ U2+ Connection diagram U1+ U2+ U1– U2– U1– U2– U +24 V I1+ I2+ I1– I2– +24 V P I1+ I2+ I1– I2– GND I P GND Passive pressure sensor at a differential current input Differential voltage input with active 3-wire transmitter 04/13/2017   Page 4 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Block diagram Supervisor UBus 8x !C Local bus FE D UA E1 E2 # U REF M U X 8:1 UA 24 V U/I AI 1...8 Internal wiring of the terminal points Classifications eCl@ss eCl@ss 4.0 27240405 eCl@ss 4.1 27240405 eCl@ss 5.0 27242201 eCl@ss 5.1 27242601 eCl@ss 6.0 27242601 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001435 ETIM 5.0 EC001596 ETIM 6.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 04/13/2017   Page 5 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Approvals Approvals Approvals UL Listed / cUL Listed / BSH / LR / NK / BV / DNV GL / PRS / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705  http://www.bsh.de/de/index.jsp  840 BSH  LR    http://www.lr.org/en  14-20019 NK    http://www.classnk.or.jp/hp/en/  TA16207M BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  36433/A2 BV  http://exchange.dnv.com/tari/  TAA00000DF  http://www.prs.pl/  TE/2106/880590/16 DNV GL  PRS   04/13/2017   Page 6 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Approvals cULus Listed       Accessories Accessories Connector set Connector set - AXL CNS 4L-O/D/UA/E1/E2 - 2700984 Axioline F connector set (for e.g., AXL F AI8 1F, AXL F AO8 1F)     Device marking Insert label - EMT (35X46)R - 0801604 Insert label, for the Axioline F series from Phoenix Contact, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, Mounting type: snapped into marker carrier, Lettering field: 35 x 46 mm     DIN rail connector Bus connector - AXL F BS F - 2688129 Axioline F bus base module for housing type F     Mounting material 04/13/2017   Page 7 / 8 https://www.phoenixcontact.com/us/products/2701232 I/O module - AXL F AI8 XC 1F - 2701232 Accessories Shield connection - AXL SHIELD SET - 2700518 Axioline shield connection set (contains 2 busbar holders and 2 SK 5 shield connection clamps)     Terminal marking Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual labeling with M-PEN 0,8, X-PEN, or CMS-P1PLOTTER     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/13/2017   Page 8 / 8