2701497

https://www.phoenixcontact.com/us/products/2701497 Distributed I/O device - AXL E PB DI8 DO8 M12 6P - 2701497 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline E PROFIBUS device in a plastic housing with 8 digital inputs and 8 digital outputs, 24 V DC, M12 fast connection technology Product Description This device is used for digital signal acquisition and output. Product Features ■ ■ ■ ■ ■ ■ Connection to PROFIBUS DP using M12connectors (B-coded) Baud rate of up to 12 Mbaud (automatic baud rate detection) Connection of digital sensors and actuators using M12connectors (A-coded) Diagnostic and status indicators Short-circuit and overload protection of the sensor supply IP65/IP67 degree of protection Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 540.0 g Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 60 mm Height 185 mm Depth 30.5 mm 04/19/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2701497 Distributed I/O device - AXL E PB DI8 DO8 M12 6P - 2701497 Technical data Dimensions Note on dimensions The height is 212 mm including fixing clips. Drill hole spacing 198.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % Permissible humidity (storage/transport) 5 % ... 95 % Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP65/IP67 General Housing material Pocan Mounting type Wall mounting Net weight 552.5 g ® Interfaces Fieldbus system PROFIBUS DP Designation PROFIBUS DP Connection method M12 fast connection technology Note on connection method B-coded Designation connection point Copper cable Transmission speed 9,6 kBit/s ... 12 MBit/s (Automatic baud rate detection) Transmission physics PROFIBUS-DP-compliant copper cable Address area assignment 1 ... 126, adjustable Number of positions 5 System limits of the bus coupler Designation PROFIBUS DP Equipment type PROFIBUS slave System-specific protocols PROFIBUS protocols DP V1 Power supply for module electronics Designation Module electronics and sensors (US) Connection method M12 connector (T-coded) Number of positions 4 Supply voltage 24 V DC Nominal supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple) Current consumption max. 12 A 04/19/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2701497 Distributed I/O device - AXL E PB DI8 DO8 M12 6P - 2701497 Technical data Power supply for module electronics Typical current consumption 165 mA ±15 % (at 24 V DC) Designation Actuators (UA) Connection method M12 connector (T-coded) Number of positions 4 Supply voltage 24 V DC Nominal supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple) Current consumption max. 12 A Typical current consumption 30 mA ±15 % (at 24 V DC) Digital inputs Input name Digital inputs Description of the input EN 61131-2 types 1 and 3 Connection method M12 connector, double occupancy 4-wire Number of inputs 8 Protective circuit Overload protection, short-circuit protection of sensor supply Input filter time < 1000 µs Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 11 V DC ... 30 V DC Nominal input current at UIN typ. 3 mA Digital outputs Output name Digital outputs Connection method M12 connector, double occupancy 3-conductor Number of outputs 8 Protective circuit Overload protection, short-circuit protection of outputs Electronic Output voltage 24 V DC Nominal output voltage 24 V DC (from voltage UA) Maximum output current per channel 500 mA Nominal load, inductive 12 VA (1.2 H, 48 Ω, with nominal voltage) Nominal load, ohmic 12 W (48 Ω; with nominal voltage) Standards and Regulations Conformity with EMC directives Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m 04/19/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2701497 Distributed I/O device - AXL E PB DI8 DO8 M12 6P - 2701497 Technical data Standards and Regulations Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical) Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 Radio interference properties EN 55022 Class A Test section 24 V supply (communications power and sensor supply, digital inputs)/bus connection 500 V AC 50 Hz 1 min. 24 V supply (communications power and sensor supply, digital inputs)/FE 500 V AC 50 Hz 1 min. Bus connection / FE 500 V AC 50 Hz 1 min. 24 V supply (actuator supply, digital outputs)/24 V supply (communications power and sensor supply, digital inputs) 500 V AC 50 Hz 1 min. 24 V supply (actuator supply, digital outputs)/bus connection 500 V AC 50 Hz 1 min. 24 V supply (actuator supply, digital outputs)/FE 500 V AC 50 Hz 1 min. Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, halfsine shock pulse Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27240404 eCl@ss 4.1 27240404 eCl@ss 5.0 27242204 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 2.0 EC001433 ETIM 3.0 EC001599 ETIM 4.0 EC001599 04/19/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2701497 Distributed I/O device - AXL E PB DI8 DO8 M12 6P - 2701497 Classifications ETIM ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 39121311 Approvals Approvals Approvals UL Listed / cUL Listed / PROFIBUS / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed  cUL Listed  PROFIBUS  cULus Listed  04/19/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2701497 Distributed I/O device - AXL E PB DI8 DO8 M12 6P - 2701497 Drawings Connection diagram Dimensional drawing 212 IN 6 +24 V 30,5 IN 5 185 OUT 4 198,5 60 30 OUT 3 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/19/2016   Page 6 / 6