2701503

https://www.phoenixcontact.com/us/products/2701503 Distributed I/O device - AXL E PB IOL8 DI4 M12 6P - 2701503 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline E PROFIBUS device in a plastic housing with 8 IO-Link ports and 4 digital inputs, 24 V DC, M12 fast connection technology Product Description The device enables the operation of up to eight IO-Link sensors/actuators and is also used to acquire digital signals.   Product Features  Connection to PROFIBUS DP using M12connectors (B-coded)  Baud rate of up to 12 Mbaud (automatic baud rate detection)  Connection of four IO-Link devices with additional digital input  Connection of four IO-Link actuators with additional power supply  Connection of IO-Link ports using M12connectors (A-coded, 5-pos.)  Diagnostic and status indicators  Short-circuit and overload protection of the sensor supply  IP65/IP67 degree of protection       Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 560.0 g Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 60 mm Height 185 mm 12/28/2015   Page 1 / 6 https://www.phoenixcontact.com/us/products/2701503 Distributed I/O device - AXL E PB IOL8 DI4 M12 6P - 2701503 Technical data Dimensions Depth 30.5 mm Note on dimensions The height is 212 mm including fixing clips. Drill hole spacing 198.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % Permissible humidity (storage/transport) 5 % ... 95 % Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP65/IP67 General Net weight 552 g Mounting type Wall mounting Interfaces Fieldbus system PROFIBUS DP Designation PROFIBUS DP Connection method 2x M12 connectors, B-coded Designation connection point Copper cable Transmission speed 9,6 kBit/s ... 12 MBit/s (Automatic baud rate detection) Transmission physics PROFIBUS-DP-compliant copper cable Address area assignment 1 ... 126, adjustable Number of positions 5 System limits of the bus coupler Designation PROFIBUS DP Equipment type PROFIBUS slave System-specific protocols PROFIBUS protocols DP V1 Power supply for module electronics Module electronics and sensors M12 connector (T-coded) Module electronics and sensors (US) 4 Connection method M12 connector (T-coded) Designation Module electronics and sensors (US) Number of positions 4 Supply voltage 24 V DC Nominal supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple) Current consumption max. 12 A 12/28/2015   Page 2 / 6 https://www.phoenixcontact.com/us/products/2701503 Distributed I/O device - AXL E PB IOL8 DI4 M12 6P - 2701503 Technical data Power supply for module electronics Typical current consumption 170 mA ±15 % (at 24 V DC) Actuators M12 connector (T-coded) Actuators (UA) 4 Connection method M12 connector (T-coded) Designation Actuators (UA) Number of positions 4 Supply voltage 24 V DC Nominal supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple) Current consumption max. 12 A Typical current consumption 30 mA ±15 % (at 24 V DC) Digital inputs Input name Digital inputs Connection method M12 connector, double occupancy 2, 3, 4-wire Number of inputs 4 (EN 61131-2 types 1 and 3) Protective circuit Protection against polarity reversal Input filter time < 1000 µs Input voltage 24 V DC Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 11 V DC ... 30 V DC Nominal input current at UIN typ. 3 mA Standards and Regulations Conformity with EMC directives Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A; Field intensity: 10 V/m Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical) Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 Radio interference properties EN 55022 Class A Test section 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection 500 V AC 50 Hz 1 min. 24 V supply (communications power and sensor supply, IO-Link ports)/FE 500 V AC 50 Hz 1 min. Bus connection / FE 500 V AC 50 Hz 1 min. 12/28/2015   Page 3 / 6 https://www.phoenixcontact.com/us/products/2701503 Distributed I/O device - AXL E PB IOL8 DI4 M12 6P - 2701503 Technical data Standards and Regulations 24 V supply (actuator supply)/24 V supply (communications power and sensor supply, IO-Link ports) 500 V AC 50 Hz 1 min. 24 V supply (actuator supply)/bus connection 500 V AC 50 Hz 1 min. 24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min. Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, halfsine shock pulse Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27240404 eCl@ss 4.1 27240404 eCl@ss 5.0 27242204 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 ETIM ETIM 2.0 EC001433 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 39121311 Approvals Approvals 12/28/2015   Page 4 / 6 https://www.phoenixcontact.com/us/products/2701503 Distributed I/O device - AXL E PB IOL8 DI4 M12 6P - 2701503 Approvals Approvals UL Listed / cUL Listed / PROFIBUS / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed  cUL Listed  PROFIBUS  cULus Listed  Drawings Connection diagram Dimensional drawing 212 DI L+ X03 33 30,5 32 X04 +24 V L- 198,5 X05 UA X06 C/Q L+ 60 UA 30 C/Q L- 185 12/28/2015   Page 5 / 6 https://www.phoenixcontact.com/us/products/2701503 Distributed I/O device - AXL E PB IOL8 DI4 M12 6P - 2701503 L- C/Q GND (UA) L+ UA Connection diagram Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/28/2015   Page 6 / 6