2701625

https://www.phoenixcontact.com/us/products/2701625 Safety module - IB IL 24 LPSDO 8 V3-PAC - 2701625 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Safety-related digital output module, IP20 protection, for the SafetyBridge system. The module has four safe digital outputs with two-channel occupancy or 8 safe digital outputs with single-channel occupancy Product description The safety module is an output module from the Inline product range, designed for use in a SafetyBridge technology system. The safety module ® can be used as part of an Inline station at any point within an INTERBUS, DeviceNet™, CANopen , EtherNet/IP™, Sercos, Modbus, PROFINET or PROFIBUS system. The transmission speed of the safety module can be set to 500 kbaud or 2 Mbaud using a switch. One transmission speed must be used consistently within a station. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for singlechannel assignment. Depending on the installation and parameterization, in the SafetyBridge system the safety module can achieve the following safety integrity: - Up to SIL 3 according to standard EN 61508 - Up to SIL CL 3 according to standard EN 62061 - Up to Cat. 4/PL e according to standard EN ISO 13849-1 Product Features  Generation and monitoring of the SafetyBridge protocol  Processing of the parameterized safety logic Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 360.0 GRM Custom tariff number 85389091 Country of origin Germany Technical data Note: Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 48.8 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions 2/17/14   Page 1 / 5 https://www.phoenixcontact.com/us/products/2701625 Safety module - IB IL 24 LPSDO 8 V3-PAC - 2701625 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Permissible humidity (operation) 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) Permissible humidity (storage/transport) 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) Air pressure (operation) 80 kPa ... 108 kPa (up to 2000 m above sea level) Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above mean sea level) Degree of protection IP20 Interfaces Fieldbus system INTERBUS Name Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s / 2MBit/s Digital outputs Output name Digital outputs Connection method Spring-cage connection 2, 3, 4-wire Number of outputs 4 (with two-channel assignment) 8 Protective circuit Overload protection, short-circuit protection of outputs Output voltage 24 V DC (US - 1 V) Nominal output voltage 24 V DC Output current max. 6 A (Total current of all outputs, -25 °C ... 50 °C) max. 4 A (Total current of all outputs, >50 °C ... 55 °C) Maximum output current per channel 2A Maximum output current per group 3A Nominal load, inductive (see safety data) Nominal load, lamp (see safety data) Nominal load, ohmic (see safety data) Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC Communications power UL 7.5 V (via voltage jumper) Current consumption max. 230 mA (from the local bus) General 2/17/14   Page 2 / 5 https://www.phoenixcontact.com/us/products/2701625 Safety module - IB IL 24 LPSDO 8 V3-PAC - 2701625 Technical data General Weight 200 g Note on weight specifications with male connectors Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Category according to EN 13849-1 4 Diagnostics messages Short-circuit / overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor Inline potentials Communications power UL 7.5 V DC (see safety data) Current consumption from UL max. 230 mA (see safety data) Main circuit supply UM 24 V DC (see safety data) Supply voltage range UM 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption from UM typ. 30 mA (all outputs set including actuator current) max. 6.03 A Segment supply voltage US 24 V (see safety data) SafetyBridge properties Connection to I/O modules max. 16 (safe digital I/O modules) Logic memory 60 kByte Classifications eCl@ss eCl@ss 4.0 27240409 eCl@ss 4.1 27240409 eCl@ss 5.0 27242205 eCl@ss 5.1 27242605 eCl@ss 6.0 27242605 eCl@ss 7.0 27242605 eCl@ss 8.0 27242605 2/17/14   Page 3 / 5 https://www.phoenixcontact.com/us/products/2701625 Safety module - IB IL 24 LPSDO 8 V3-PAC - 2701625 Classifications ETIM ETIM 3.0 EC001599 ETIM 4.0 EC002498 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Listed / cUL Listed / Functional Safety / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  Functional Safety  2/17/14   Page 4 / 5 https://www.phoenixcontact.com/us/products/2701625 Safety module - IB IL 24 LPSDO 8 V3-PAC - 2701625 Approvals cULus Listed  © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 2/17/14   Page 5 / 5