https://www.phoenixcontact.com/us/products/2701813
I/O module - AXL F DO16 FLK 1H - 2701813
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Axioline F digital output module, 16 outputs, 24 V DC, 500 mA, FLK20 connection for system cabling (including
bus base module and connectors)
Product Description
The module is designed for use within an Axioline F station. It is used to output digital signals.
You can connect PLC relays from the INTERFACE product range quickly and conveniently using the FLK connection. This means that you can also use
this output module in applications which require relays, e.g., to switch high voltages or currents.
Product Features
16 digital outputs
24 V DC, 500 mA
Minimum update time of < 100 μs
Device rating plate stored
Diagnostic and status indicators
Key Commercial Data
Packing unit
1 pc
Weight per Piece (excluding packing)
200.0 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
35 mm
Height
126.1 mm
10/29/2015 Page 1 / 6
https://www.phoenixcontact.com/us/products/2701813
I/O module - AXL F DO16 FLK 1H - 2701813
Technical data
Dimensions
Depth
54 mm
Note on dimensions
The depth is valid when a TH 35-7.5 DIN rail is used (according to
EN 60715).
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
Connection data
Designation
Axioline F connector
Connection method
Push-in connection
Note on connection method
Please observe the information provided on conductor cross sections in
the “Axioline F: system and installation” user manual.
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Stripping length
8 mm
General
Net weight
108 g
Note on weight specifications
with connector and bus base module
Mounting type
DIN rail
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Test section
5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min
5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min
Conformance with EMC directives
Noise immunity test in accordance with EN 61000-6-2 Electrostatic
discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B; 6 kV contact
discharge, 8 kV air discharge
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic
fields EN 61000-4-3/IEC 61000-4-3 Criterion A; Field intensity: 10 V/m
Noise immunity test in accordance with EN 61000-6-2 Fast transients
(burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
10/29/2015 Page 2 / 6
https://www.phoenixcontact.com/us/products/2701813
I/O module - AXL F DO16 FLK 1H - 2701813
Technical data
General
Noise immunity test in accordance with EN 61000-6-2 Transient surge
voltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B; DC supply lines:
±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Noise immunity test in accordance with EN 61000-6-2 Conducted
interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V
Noise emission test according to EN 61000-6-3 Radio interference
properties EN 55022 Class B
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, halfsine shock pulse
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g
Diagnostics messages
Short-circuit / overload of the digital outputs Yes
Interfaces
Designation
Axioline F local bus
Connection method
Bus base module
Transmission speed
100 MBit/s
Axioline potentials
Communications power UBus
5 V DC (via bus base module)
Current consumption from UBus
max. 120 mA
Supply of digital output modules UO
24 V DC
Current consumption from UO
8 A (external fuse)
Digital outputs
Output name
Digital outputs
Connection method
FLK20 pin strip
FLK connector (20-pos.)
Number of outputs
16
Protective circuit
Short-circuit protection, overload protection of the outputs Electronic
Output voltage
24 V
Nominal output voltage
24 V DC
Maximum output current per channel
500 mA
Maximum output current per module
8 A (external fuse)
Nominal load, inductive
max. 12 VA (1.2 H; 48 Ω; with nominal voltage)
Nominal load, lamp
max. 12 W (at nominal voltage)
Nominal load, ohmic
max. 12 W (48 Ω; with nominal voltage)
10/29/2015 Page 3 / 6
https://www.phoenixcontact.com/us/products/2701813
I/O module - AXL F DO16 FLK 1H - 2701813
Classifications
eCl@ss
eCl@ss 4.0
27240404
eCl@ss 4.1
27240404
eCl@ss 5.0
27242204
eCl@ss 5.1
27242604
eCl@ss 6.0
27242604
eCl@ss 7.0
27242604
eCl@ss 8.0
27242604
ETIM
ETIM 4.0
EC001599
ETIM 5.0
EC001599
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
39121311
UNSPSC 12.01
39121311
UNSPSC 13.2
39121311
Approvals
Approvals
Approvals
UL Listed / cUL Listed / cULus Listed
Ex Approvals
Approvals submitted
Approval details
UL Listed
10/29/2015 Page 4 / 6
https://www.phoenixcontact.com/us/products/2701813
I/O module - AXL F DO16 FLK 1H - 2701813
Approvals
cUL Listed
cULus Listed
Drawings
Connection diagram
Connection diagram
2
1
3
FLK 20/...
A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+ A1+
A2- A2- A2- A2- A2- A2- A2- A2- A2- A2- A2- A2- A2- A2- A2- A2-
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
24
V
4
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Connection of relay modules
Connection diagram
Dimensional drawing
35
1
54
2
122,4
2
4
6
8
10
12
14
16
18
125,9
3
20
Connection of an interface module
10/29/2015 Page 5 / 6
https://www.phoenixcontact.com/us/products/2701813
I/O module - AXL F DO16 FLK 1H - 2701813
Diagram
Energy consumption [J]
Block diagram
UBus
!C
Local bus
1
2
15
0,4
Only with external free running circuit
0,35
0,3
0,25
0,2
0,15
0,1
0,05
1 = 0,5 A
2 = 0,4 A
3 = 0,3 A
4 = 0,2 A
5 = 0,1 A
1
2
3
4
5
16
0
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4
Output circuit
D
UO
16x
E1
1
2
3
UO
24 V
Internal wiring of the terminal points
Inductance [H]
15
16
DO 1...16
Maximum energy consumption of the outputs when switching off inductive
loads
The diagram shows the maximum amount of energy that may be fed back
into the corresponding output groups (outputs 1 to 4, 5 to 8, 9 to 12, 13
to 16) for each switch off procedure when switching off an inductive load
without external freewheeling circuit.
The current data refers to the ohmic DC voltage component of the inductive
load.
Note: Restrict freewheeling voltage to a maximum of -15 V when using
an external freewheeling circuit. The external freewheeling circuit has no
function in the event of a higher negative voltage.
Phoenix Contact 2015 © - all rights reserved
http://www.phoenixcontact.com
10/29/2015 Page 6 / 6
