2701863

https://www.phoenixcontact.com/us/products/2701863 Redundancy module - FL RED 2003E PRP - 2701863 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ethernet redundancy module for redundant networks with the redundancy protocol PRP and three RJ45 connections. Product Description The compact redundancy modules (RED) enable flexible and economical design of high-availability Ethernet networks in the field of energy and automation. With robustness according to IEC 61850-3 and IEEE 1613, their wide temperature range from -40°C to +70°C, and extensive power supply range from 18 to 58 V DC, they cover all the requirements of industrial and energy technology applications. Parallel redundancy according to IEC 62439 enables high availability networks without switch-over time to be established. Product Features ■ ■ ■ ■ ■ ■ ■ ■ Meets the requirements of IEC 61850-3 and IEEE 1613 Standardized PRP redundancy function according to IEC 62439-3 Easy startup without configuration Parallel redundancy without switch-over times for maximum availability No loss of packets in the event of network failure Low power consumption during operation -40°C ... +70°C ambient temperature Alarm contact Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 600.0 g Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area 04/19/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2701863 Redundancy module - FL RED 2003E PRP - 2701863 Technical data Dimensions Width 40 mm Height 100 mm Depth 109 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -45 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (3000 m above sea level) Interfaces Interface 1 Ethernet (RJ45) No. of ports 3 (RJ45 ports) Connection method RJ45 Note on connection method Auto negotiation and autocrossing Transmission physics Copper Transmission speed 10/100 MBit/s Transmission length 100 m (per segment) Data flow control/protocols IEC 61850-3, IEEE 1613 Function Basic functions Ethernet redundancy module for the Parallel Redundancy Protocol Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port Network expansion parameters Maximum conductor length (twisted pair) 100 m Supply voltage Supply voltage 24 V DC (redundant) 48 V DC (redundant) Residual ripple 3.6 VPP (within the permitted voltage range) Supply voltage range 18 V DC ... 58 V DC Typical current consumption 250 mA (at US = 24 V DC) General Mounting type DIN rail Type AX Block design 04/19/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2701863 Redundancy module - FL RED 2003E PRP - 2701863 Technical data General Net weight 417 g Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Standards and Regulations Developed in acc. with standard IEC 61000-6.2 Test standard IEC 61000-4-2 (ESD) Test result Criterion A Test standard IEC 61000-4-3 (immunity to radiated interference) Test result Criterion A Test standard IEC 61000-4-4 (burst) Test result Criterion A Test standard IEC 61000-4-5 (surge) Test result Criterion A Test standard IEC 61000-4-6 (immunity to conducted interference) Test result Criterion A Test standard IEC 61000-4-8 (immunity to magnetic fields) Test result Criterion A Test standard EN 55022 (emitted interference) Test result Criterion B Noise emission EN 61000-6-4 Noise immunity IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005 Classifications eCl@ss eCl@ss 4.0 24010504 eCl@ss 4.1 24010504 eCl@ss 5.0 19030101 eCl@ss 5.1 19030101 eCl@ss 6.0 19170103 eCl@ss 7.0 19170190 04/19/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2701863 Redundancy module - FL RED 2003E PRP - 2701863 Classifications eCl@ss eCl@ss 8.0 27069204 ETIM ETIM 4.0 EC001478 ETIM 5.0 EC000515 UNSPSC UNSPSC 6.01 20142601 UNSPSC 7.0901 20142601 UNSPSC 11 20142601 UNSPSC 12.01 20142601 UNSPSC 13.2 20142601 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  04/19/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2701863 Redundancy module - FL RED 2003E PRP - 2701863 Approvals cULus Listed  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/19/2016   Page 5 / 5