2702053

https://www.phoenixcontact.com/us/products/2702053 I/O module - AXL F DO64/1 2F - 2702053 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F, Digital output module, Digital outputs: 64, 24 V DC, 500 mA, Connection method: 1-wire, Transmission speed in the local bus 100 MBit/s, Degree of protection IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline˽F station. It is used to output digital signals. The outputs are protected against short circuit and overload. Why buy this product  64 digital outputs  24 V DC, 500 mA  Connection of actuators in single-wire technology  Device rating plate stored  Diagnostic and status indicators Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 320.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 53.6 mm Height 129.9 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7.5 DIN rail is used (according to EN 60715). 09/01/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2702053 I/O module - AXL F DO64/1 2F - 2702053 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 260 g Note on weight specifications with connectors and bus base module Diagnostics messages Short-circuit / overload of the digital outputs Yes Interfaces Designation Axioline F local bus Connection method Bus base module Transmission speed 100 MBit/s Axioline potentials Communications power UBus 5 V DC (via bus base module) Current consumption from UBus max. 120 mA Supply of digital output modules UO 24 V DC Current consumption from UO max. 16 A (for parallel supply, provide external protection) Digital outputs Output name Digital outputs 09/01/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2702053 I/O module - AXL F DO64/1 2F - 2702053 Technical data Digital outputs Connection method Push-in connection 1-wire Number of outputs 64 Protective circuit Short-circuit protection, overload protection of the outputs Electronic Output voltage 24 V Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module 16 A (external fuse) Nominal load, inductive max. 12 VA (1.2 H, 48 Ω, with nominal voltage) Nominal load, lamp max. 12 W (at nominal voltage) Nominal load, ohmic max. 12 W (48 Ω; with nominal voltage) Electrical isolation 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. Test section 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Drawings Connection diagram OUT1 00 01 02 03 04 05 06 07 10 11 12 13 14 15 16 17 20 21 22 23 24 25 26 Connection diagram 27 OUT33 30 31 32 33 34 35 36 70 71 72 73 74 75 76 77 60 61 62 63 64 65 66 67 50 51 52 53 54 55 56 57 40 41 42 43 44 45 46 47 OUT8 37 00 01 02 03 04 05 06 07 10 11 12 13 14 15 16 17 20 21 22 23 24 25 26 27 30 31 32 33 34 35 36 37 OUT1 OUT25 OUT32 OUT64 OUT40 OUT 8 OUT25 OUT32 Connection with 1-wire technology 09/01/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2702053 I/O module - AXL F DO64/1 2F - 2702053 Dimensional drawing 129,9 54 122,4 53,6 Classifications eCl@ss eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 5.0 EC001599 Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals Approval details UL Listed   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 09/01/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2702053 I/O module - AXL F DO64/1 2F - 2702053 Approvals cUL Listed   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cULus Listed    Accessories Accessories DIN rail connector Bus connector - AXL F BS F - 2688129 Axioline F bus base module for housing type F     Terminal marking Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual labeling with M-PEN 0,8, X-PEN, or CMS-P1PLOTTER     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/01/2016   Page 5 / 5