2702120

https://www.phoenixcontact.com/us/products/2702120 I/O module - AXL F RTD8 S 1F - 2702120 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F temperature module, 8 inputs for connecting temperature shunts, measuring dynamics up to > 8 Hz (including bus base module and connectors) Product Description The module is designed for use within an Axioline F station. It is used to acquire signals from resistive temperature sensors. It is used to acquire signals from resistive temperature sensors. The module supports all common platinum and nickel sensors according to DIN EN 60751 and SAMA. Cu10, Cu50, Cu53 sensors as well as various KTY8x sensor types are also supported. Cu10, Cu50, and Cu53 sensors are also supported. Why buy this product  8 analog input channels for the connection of resistance temperature detectors (RTD)  Linear inputs 500 Ω  Connection of sensors with 2- and 4-wire technology  Integrated, digital sensor linearization  Standardized measured value representation directly in °C, °F or Ω  Measured value display in 16-bit format or floating point format  8 Hz measuring dynamics per channel  Programmable filters  Short-circuit protected inputs  Device rating plate stored  Diagnostic and status indicators  Temperature stability  Very high level of noise immunity  Low noise emission  Installation monitoring by means of “Channel scout” function Key Commercial Data Packing unit 1 STK 04/11/2017   Page 1 / 6 https://www.phoenixcontact.com/us/products/2702120 I/O module - AXL F RTD8 S 1F - 2702120 GTIN GTIN 4046356977852 Weight per Piece (excluding packing) 260.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 53.6 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH 35-7.5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 241.3 g Note on weight specifications with connectors and bus base module 04/11/2017   Page 2 / 6 https://www.phoenixcontact.com/us/products/2702120 I/O module - AXL F RTD8 S 1F - 2702120 Technical data Interfaces Designation Axioline F local bus Connection method Bus base module Transmission speed 100 Mbps Power supply for module electronics Connection method Push-in connection Note on connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Axioline potentials Communications power UBus 5 V DC (via bus base module) Current consumption from UBus typ. 115 mA max. 180 mA Supply for analog modules UA 24 V DC Current consumption from UA typ. 15 mA max. 25 mA Analog inputs Number of inputs 8 (for resistance temperature detectors) Input name Analog inputs Description of the input Inputs for resistive temperature sensors Connection method Push-in connection Connection technology 2, 4-wire (shielded) Sensor types (RTD) that can be used Pt, Ni, Cu sensors Linear resistance measuring range 0 Ω ... 500 Ω Nominal value of the current sources 1 mA (Pt 100, Ni 100, RLin 500 Ω; pulse current, the specification is valid during the sampling phase) Measured value representation 16 bits (15 bits + sign bit) Resolution A/D 24 bit Protective circuit Short-circuit protection, overload protection of the inputs Data formats IB IL, S7-compatible Input filter time 8 ms Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g 04/11/2017   Page 3 / 6 https://www.phoenixcontact.com/us/products/2702120 I/O module - AXL F RTD8 S 1F - 2702120 Technical data Standards and Regulations Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Connection diagram a1 00 01 02 03 04 05 06 07 U+ a2 10 11 12 13 14 15 16 20 21 22 23 24 25 26 a1 00 01 02 03 04 05 06 07 a2 10 11 12 13 14 15 16 17 U+ RL 17 I+ b1 Connection diagram RL 27 RTD I– I+ ϑ b1 20 21 22 23 24 25 26 30 31 32 33 34 35 36 RL 27 ϑ RTD I– RL b2 RL RL 37 b2 30 31 32 33 34 35 36 37 U– RL Connection example: 3-wire connection with external bridge Connection example: 4-wire connection Connection diagram a1 00 01 02 03 04 05 06 07 a2 10 11 12 13 14 15 16 17 Connection diagram a1 00 01 02 03 04 05 06 07 a2 10 11 12 13 14 15 16 17 U+ I+ b1 20 21 22 23 24 25 26 RL 27 RTD I– I+ ϑ b1 20 21 22 23 24 25 26 30 31 32 33 34 35 36 37 RL 27 ϑ RTD I– RL RL b2 RL b2 30 31 32 33 34 35 36 37 U– RL Connection example: 2-wire connection Connection example: 4-wire connection for 3-wire sensor with long supply lines 04/11/2017   Page 4 / 6 https://www.phoenixcontact.com/us/products/2702120 I/O module - AXL F RTD8 S 1F - 2702120 Dimensional drawing 53,6 Block diagram 54 Supervisor UBus 8x mC Local bus FE # 126,1 122,4 Supervisor U D UA E1 E2 +5V DC UANA 24 V RTD IN Dimensional drawing Internal wiring of the terminal points Approvals Approvals Approvals UL Listed / cUL Listed / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cULus Listed       04/11/2017   Page 5 / 6 https://www.phoenixcontact.com/us/products/2702120 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/11/2017   Page 6 / 6