2702134

https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline counter terminal, version for extreme conditions, complete with accessories (connectors and marking fields), 1 counter input, 1 control input, 1 output, 24 V DC, 500 mA, 3-conductor connection technology The figure shows the standard item Product Description The terminal is designed for use within an Inline station. The counter terminal acquires and processes fast pulse sequences from sensors. It has a counter input (source), a control input (gate), and a switching output that can be freely parameterized. The switching output is set independently of the terminal. Fast response times can therefore be achieved, which are independent of both the bus and controller. The terminal can be operated in four different operating modes: frequency measurement, event counting, time measurement, and pulse generation (pulse generator). Your advantages  1 counter input  1 control input  1 freely parameterizable switching output  Four operating modes: event counting, time or state-controlled frequency measurement, time measurement (period or pulse length), and pulse generator  Processing of 5 V or 24 V signals  Input frequency of up to 100 kHz  16-bit counter value for time measurement  24-bit counter value for event counting and frequency measurement  Can be used under extreme ambient conditions  Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)  Coated PCBs Key Commercial Data Packing unit 1 pc GTIN 06/28/2020   Page 1 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 GTIN 4046356981798 Weight per Piece (excluding packing) 180.000 g Custom tariff number 85389099 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 24.4 mm Height 135 mm Depth 71.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C (Standard) -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Inline connector Connection method Spring-cage connection Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Color green Net weight 130 g Note on weight specifications with connectors 06/28/2020   Page 2 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Technical data General Operating mode Process data operation with 2 words Diagnostics messages Sensor supply short-circuit Sensor supply overload Interfaces Designation Inline local bus No. of channels 2 Connection method Inline data jumper Transmission speed 500 kbps Transmission physics Copper Inline potentials Designation Communications power (UL) Supply voltage 7.5 V DC (via voltage jumper) Current consumption typ. 40 mA max. 50 mA Power consumption max. 0.375 W (at UL) Designation Segment circuit supply (US) Supply voltage 24 V DC (via voltage jumper) Current consumption max. 1 A min. 0 A (without connected peripherals) Digital outputs Output name Switching output Connection method Spring-cage connection Connection technology 2-wire Number of outputs 1 Protective circuit Short-circuit protection Yes, short-circuit-proof (automatically switched on again) Overload protection Output voltage 24 V DC (Nominal voltage) Output current max. 0.5 A (Nominal current) Nominal load, inductive max. 12 VA (1.2 H, 48 Ω) Nominal load, lamp max. 12 W Nominal load, ohmic max. 12 W (48 Ω) Limitation of the voltage induced on circuit interruption approx. -18 V Behavior with inductive overload Output can be destroyed Reverse voltage resistance to short pulses Reverse voltage proof Electrical isolation 06/28/2020   Page 3 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Technical data Electrical isolation Test section 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics) / functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Connection in acc. with standard CUL Protection class III (IEC 61140, EN 61140, VDE 0140-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 06/28/2020   Page 4 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Connection diagram 06/28/2020   Page 5 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Block diagram 06/28/2020   Page 6 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Dimensional drawing Classifications eCl@ss eCl@ss 10.0.1 27242605 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242605 eCl@ss 8.0 27242605 eCl@ss 9.0 27242605 ETIM ETIM 5.0 EC001601 ETIM 6.0 EC001601 ETIM 7.0 EC001601 UNSPSC UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 06/28/2020   Page 7 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Classifications UNSPSC UNSPSC 21.0 32151602 Approvals Approvals Approvals UL Recognized / cUL Recognized / UL Recognized / cUL Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 Accessories Accessories Connector set 06/28/2020   Page 8 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Accessories Connector set - IB IL AO/CNT-PLSET - 2732664 Connector set     Labeling panel Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Plug Inline connector - IB IL SCN-8 - 2726337 Connector, for digital 1, 2 or 8-channel Inline terminals     Inline shield connector - IB IL SCN-6 SHIELD - 2726353 Inline shield connector     Terminal marking 06/28/2020   Page 9 / 10 https://www.phoenixcontact.com/us/products/2702134 Inline function terminal - IB IL CNT-XC-PAC - 2702134 Accessories Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert, lettering field size: 62 x 10 mm, Number of individual labels: 72     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/28/2020   Page 10 / 10