2702171

https://www.phoenixcontact.com/in/products/2702171 Safety module - AXL F LPSDO8/3 1F - 2702171 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Safety-related digital output module, IP20 protection, for the SafetyBridge system. The module has four safe digital outputs with two-channel occupancy or 8 safe digital outputs with single-channel occupancy Product Description The safety module is an output module from the Axioline F product range with integrated safety logic designed for use in a ® SafetyBridge Technology V3 system. The safety module can be used as part of an Axioline F station at any point within an EtherCAT , EtherNet/ IP™, Sercos, Modbus, PROFINET or PROFIBUS system. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for single-channel assignment. Why buy this product  Cost-effective system configuration, as no safety PLC or safe fieldbus system is required  Flexible use, thanks to compatibility with all bus couplers from the Axioline F range  Reduced installation time, thanks to fast wiring and easy handling  Easy configuration using the free SAFECONF software  Up to SIL 3 according to EN 61508  Up to SILCL 3 according to EN 62061  Up to cat. 4/PL e according to EN ISO 13849-1 Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626004983 Weight per Piece (excluding packing) 222.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions Width 53.6 mm 05/03/2018   Page 1 / 6 https://www.phoenixcontact.com/in/products/2702171 Safety module - AXL F LPSDO8/3 1F - 2702171 Technical data Dimensions Height 126.1 mm Depth 54 mm Note on dimensions Housing dimensions Ambient conditions Ambient temperature (operation) -35 °C ... 60 °C (Mounting position: any) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 75 % (on average, 85% infrequently, non-condensing) Permissible humidity (storage/transport) 10 % ... 75 % (non-condensing) Air pressure (operation) 70 kPa ... 108 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above sea level) Degree of protection IP20 Interfaces Designation Axioline F local bus (Note: not suitable for use in the Axioline F local bus of the Phoenix Contact AXC 3050 controller) No. of channels 1 Connection method Bus base module Digital outputs Output name Digital outputs Connection method Direct plug-in technology Connection technology 2, 3-wire Number of outputs 4 (with two-channel assignment) 8 Type of protection Overload protection, freewheeling circuit for inductive loads, Discharge circuit for accelerated discharge of capacitive loads Output voltage 24 V DC Output current max. 2 A (per channel) max. 1.5 A (per channel according to CULUS) max. 4 A (per group) max. 3 A (per group according to CULUS) max. 8 A (Total current of all outputs; Please observe the notes in the user manual.) max. 6 A (Total current of all outputs according to CULUS) Maximum output current per channel 2A Maximum output current per module / terminal block 8A General Mounting type DIN rail Net weight 222 g Note on weight specifications with connectors and bus base module Axioline potentials 05/03/2018   Page 2 / 6 https://www.phoenixcontact.com/in/products/2702171 Safety module - AXL F LPSDO8/3 1F - 2702171 Technical data Axioline potentials Designation Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) Current consumption typ. 260 mA (all outputs set; power supply by UO of 19.2 V DC to 30.2 V DC) max. 280 mA Designation Supply for digital output modules (UO) Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30.2 V DC (including all tolerances, including ripple) Current consumption typ. 25 mA (all outputs set; power supply by UO with 30.2 V DC; without power supply to the actuator) Type of protection Protection against polarity reversal, EMC protective circuit, undervoltage detection SafetyBridge properties Connection to I/O modules max. 16 (safe digital I/O modules) Logic memory 30 kByte Safety-related characteristic data Designation IEC 61508 - High demand Safety Integrity Level (SIL) max. 3 (two channel; dependent in parameterization and wiring) Designation IEC 61508 - Low demand Safety Integrity Level (SIL) max. 3 (two channel; dependent in parameterization and wiring) Designation EN ISO 13849 Performance level (PL) max. e (two channel; dependent in parameterization and wiring) Category max. 4 (two channel; dependent in parameterization and wiring) Designation EN 62061 Safety Integrity Level Claim Limit (SIL CL) max. 3 (two channel; dependent in parameterization and wiring) Standards and Regulations Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 05/03/2018   Page 3 / 6 https://www.phoenixcontact.com/in/products/2702171 Safety module - AXL F LPSDO8/3 1F - 2702171 Dimensional drawing 126,1 54 122,4 53,6 Classifications eCl@ss eCl@ss 5.1 27242694 eCl@ss 6.0 27242694 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 3.0 EC001599 ETIM 4.0 EC002498 ETIM 5.0 EC001599 ETIM 6.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 32151602 Approvals Approvals Approvals UL Listed / cUL Listed / Functional Safety / Functional Safety / cULus Listed Ex Approvals Approval details 05/03/2018   Page 4 / 6 https://www.phoenixcontact.com/in/products/2702171 Safety module - AXL F LPSDO8/3 1F - 2702171 Approvals UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 Functional Safety      968/EZ 424.05/17 Functional Safety      968/EZ 424.05/17 cULus Listed       Accessories Accessories Device marking Insert label - EMT (35X28)R - 0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm     DIN rail connector Bus connector - AXL F BS F - 2688129 Axioline F bus base module for housing type F     Terminal marking 05/03/2018   Page 5 / 6 https://www.phoenixcontact.com/in/products/2702171 Safety module - AXL F LPSDO8/3 1F - 2702171 Accessories Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER     Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual labeling with M-PEN 0,8, X-PEN, or CMSP1-PLOTTER     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 05/03/2018   Page 6 / 6