2702223

PLD E 400 W ... LED enclosure light, 24 V DC, color temperature 5000 K, pivoting Data sheet 106445_en_03 1 © PHOENIX CONTACT 2016-06-09 Description The LED light is designed to illuminate the interior of control cabinets. The integrated prismatic design ensures optimum illumination of the control cabinet. Accessories for clip fixing are supplied with the light. You can therefore mount the light without using tools. For connected control cabinets, for example, multiple lights can be connected one after the other and therefore supplied using just one power supply unit. The light mode can be controlled via a button. The light can be permanently switched on or off or automatic mode can be enabled. In automatic mode the light is switched on and off via a door position switch: the lighting is switched on when the control cabinet door is opened and off again when the control cabinet door is closed. Features – – – – Color temperature 5000 K Lights can be connected in series IP20 degree of protection Pivoting Make sure you always use the latest documentation. It can be downloaded from the product at phoenixcontact.net/products. PLD E 400 W ... 2 Table of contents 1 Description .............................................................................................................................. 1 2 Table of contents ..................................................................................................................... 2 3 Ordering data .......................................................................................................................... 3 4 Technical data ......................................................................................................................... 4 5 Safety notes............................................................................................................................. 7 6 Illuminance distribution ............................................................................................................ 7 7 Pin assignment ........................................................................................................................ 9 8 Connection examples ............................................................................................................ 10 9 Function description .............................................................................................................. 10 106445_en_03 PHOENIX CONTACT 2 / 10 PLD E 400 W ... 3 Ordering data Description Type Order No. Pcs./Pkt. LED enclosure light, 24 V DC, Degree of protection IP20, PLD E 400 W 250 Color temperature  5000 K, Length 250 mm, pivoting, can be switched in series, including mounting accessories 2702221 1 LED enclosure light, 24 V DC, Degree of protection IP20, PLD E 400 W 375 Color temperature  5000 K, Length 375 mm, pivoting, can be switched in series, including mounting accessories 2702222 1 LED enclosure light, 24 V DC, Degree of protection IP20, PLD E 400 W 500 Color temperature  5000 K, Length 500 mm, pivoting, can be switched in series, including mounting accessories 2702223 1 Accessories Order No. Pcs./Pkt. 2868596 1 Primary-switched STEP POWER power supply for DIN rail STEP-PS/ 1AC/24DC/0.75/FL 2868622 mounting, input: 1-phase, output: 24 V DC/0.75 A 1 Plug-in power supply unit for class 400 LED enclosure PLD E 400-PS/1AC/24DC/ lights, including country-specific plug adapters for Europe, 12W Great Britain, USA and Australia; max. output voltage 12 W 2702435 1 Plug-in power supply unit for class 400 LED enclosure PLD E 400-PS/1AC/24DC/ lights, including country-specific plug adapters for Europe, 30W Great Britain, USA and Australia; max. output voltage 30 W 2702436 1 Sensor/Actuator cable, 3-position, PUR halogen-free, black-gray RAL 7021, free cable end, on Socket straight M8 Snap-in, Cable length: 3 m, with ferrules 1417698 1 Sensor/Actuator cable, 3-position, PUR halogen-free, SAC-3P-M 8MS/ 0,6-PUR/M black-gray RAL 7021, Plug straight M8, on Socket straight 8SIFS M8 Snap-in, Cable length: 0.6 m 1417699 1 Sensor/Actuator cable, 3-position, PUR halogen-free, SAC-3P-M 8MS/ 1,0-PUR/M black-gray RAL 7021, Plug straight M8, on Socket straight 8SIFS M8 Snap-in, Cable length: 1 m 1417700 1 Sensor/Actuator cable, 3-position, PUR halogen-free, SAC-3P-M 8MS/ 3,0-PUR/M black-gray RAL 7021, Plug straight M8, on Socket straight 8SIFS M8 Snap-in, Cable length: 3 m 1417701 1 Door position switch with 3 m cable with open cable end and 0.6 m cable with M8 socket (Snap-in), including mounting accessories 2702336 1 Door position switch with 1 m cable with M8 plug and PLD E 400-DS-MS/1,0-FS/0,6 2702337 0.6 m cable with M8 socket (Snap-in), including mounting accessories 1 Type Primary-switched STEP POWER power supply for DIN rail STEP-PS/ 1AC/24DC/0.5 mounting, input: 1-phase, output: 24 V DC/0.5 A 106445_en_03 SAC-3P- 3,0-PUR/M 8SIFS AE PLD E 400-DS-3,0/FS/0,6 PHOENIX CONTACT 3 / 10 PLD E 400 W ... Accessories Type Order No. Pcs./Pkt. Set for magnetic mounting of class 400 PLD enclosure lights PLD E 400-ME MM 2702312 1 Set for screw mounting of class 400 PLD enclosure lights, PLD E 400-ME SM including screws and washers 2702313 1 Set consisting of two clip retainers for class 400 PLD enclosure lights (replacement part) 2702314 1 4 PLD E 400-ME CM Technical data Dimensions (nominal sizes in mm) 250 38 23 1 3 4 Length 250 mm Width 23 mm Height 38 mm Dimensions (nominal sizes in mm) 375 38 23 1 3 4 Length 375 mm Width 23 mm Height 38 mm Dimensions (nominal sizes in mm) 500 38 23 1 3 4 Length 500 mm Width 23 mm Height 38 mm General data Weight (PLD E 400 W 250) 120 g Weight (PLD E 400 W 375) 170 g Weight (PLD E 400 W 500) 220 g Color traffic grey A RAL 7042 Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C 106445_en_03 PHOENIX CONTACT 4 / 10 PLD E 400 W ... General data Permissible humidity (operation) 5 % ... 95 % Permissible humidity (storage/transport) 5 % ... 95 % Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Protection class III Mounting position any Mounting type Clip mounting Special properties pivoting (Schwenkbereich ±90 °) can be switched in series including mounting accessories Connection data Connection method M8 connector (snap-in) Number of positions 3 Power supply for module electronics Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC Power consumption (PLD E 400 W 250) 1.5 W Power consumption (PLD E 400 W 375) 3W Power consumption (PLD E 400 W 500) 5W When using LED enclosure lights for the North American market, use class 2 power supply units. Light properties Source of light type LED Number of LEDs (PLD E 400 W 250) 5 Number of LEDs (PLD E 400 W 375) 12 Number of LEDs (PLD E 400 W 500) 20 Service life, lighting appliance 50,000 h (L70) Light color Neutral white Color temperature 5000 K Color rendering index 75 Luminous flux (PLD E 400 W 250) 140 lm (Net luminous flux) Luminous flux (PLD E 400 W 375) 340 lm (Net luminous flux) Luminous flux (PLD E 400 W 500) 560 lm (Net luminous flux) 106445_en_03 PHOENIX CONTACT 5 / 10 PLD E 400 W ... Light properties Illumination (PLD E 400 W 250) max. 335 lx (50 cm distance) max. 85 lx (Distance of 1 m) Illumination (PLD E 400 W 375) max. 845 lx (50 cm distance) max. 210 lx (Distance of 1 m) Illumination (PLD E 400 W 500) max. 1350 lx (50 cm distance) max. 335 lx (Distance of 1 m) Mechanical tests Vibration resistance in acc. with EN 60068-2-6/ IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 25g Continuous shock according to EN 60068-2-27/ IEC 60068-2-27 10g Conformance with EMC Directive 2014/30/EU Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 610004-2 Criterion B; 4 kV contact discharge, 4 kV air discharge Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B; ±2 kV Transient overvoltage (surge) EN 61000-4-5/IEC 610004-5 Criterion A, ±1 kV (symmetrical), ±2 kV (asymmetrical) Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 Radio interference properties EN 55011 Class A Approvals For the latest approvals, please visit phoenixcontact.net/products. 106445_en_03 PHOENIX CONTACT 6 / 10 PLD E 400 W ... 5 Safety notes WARNING: Explosion hazard Do not install and operate the light in potentially explosive spaces! 6 Illuminance distribution The illuminance distribution depends on the length of the light. Please refer to the figures below for the illuminance distribution. 20 60 30 Looking at the light continually can temporarily impair vision. This can increase the danger of accidents. Therefore do no look at a light source for a long period. 90 60 90 60 90 20 30 60 90 60 60 30 60 30 30 NOTE: Damage to the electronics 30 20 The IP20 degree of protection (IEC 60529/EN 60529) of the device is intended for use in a clean and dry environment. Do not subject the device to mechanical and/ or thermal loads that exceed the specified limits. 20 90 60 90 60 30 2,00 m 5 20 30 10 CAUTION: Impaired vision 20 20 30 20 10 10 NOTE 5 Before any work on the light, always switch off the supply voltage and ensure it cannot be switched on again! 5 0,00 m 0,00 m Figure 1 106445_en_03 0,95 m Lighting level distribution in Lux PLD E 400 W 250 (installation depth of the control cabinet plate d = 200 mm) PHOENIX CONTACT 7 / 10 PLD E 400 W ... 60 30 60 180 120 180 120 120 60 180 80 160 60 240 120 320 240 60 120 160 60 60 60 60 240 240 160 120 80 160 240 160 160 160 80 80 60 30 80 240 320 320 160 2,00 m 30 80 160 320 320 160 180 120 180 80 40 60 180 120 240 2,00 m 20 60 60 60 30 40 40 20 20 30 30 15 15 20 20 10 15 0,00 m 0,00 m Figure 2 106445_en_03 0,00 m 0,95 m Lighting level distribution in Lux PLD E 400 W 375 (installation depth of the control cabinet plate d = 200 mm) 0,00 m Figure 3 0,95 m Lighting level distribution in Lux PLD E 400 W 500 (installation depth of the control cabinet plate d = 200 mm) PHOENIX CONTACT 8 / 10 PLD E 400 W ... 7 Pin assignment To supply power to the light, connect the cable to the X01 IN connector. 4 1 3 X01 IN Pin assignment of the M8 connectors Pin Assignment 1 +24 V DC 3 4 GND +24 V DC (switched) Conductor Note color Brown Power supply to the light Blue Black Signal from door position switch for controlling the light in mode A Only use Phoenix Contact accessories! Figure 4 Connection of the supply voltage of a light To connect multiple lights in series, connect the X02 OUT output of one light to the X01 IN input of the following light. NOTE: device damage Make sure that the total current consumed by all the lights used in a series connection does not exceed 2 A. 4 3 1 X02 OUT Figure 5 106445_en_03 Forwarding of the supply voltage with the series connection of lights PHOENIX CONTACT 9 / 10 PLD E 400 W ... 8 Connection examples Function description Once you have provided voltage to the light, it is ready for operation and in mode 0 (delivery condition) or in the most recently selected mode. A Button S1 on the light is used to control the light mode. The current mode is indicated via the status LED. +24 V DC Press the button to change mode. Each time button S1 is pressed, the light changes to the next mode: 0 - A - I. GND Figure 6 9 Connection of the light using a door position switch (A) X01 IN 2 Figure 7 Connection of a light Figure 9 X01 IN X02 OUT X01 IN Figure 8 106445_en_03 1 Button S1 and status LED Mode 0 Status LED OFF A Yellow ON I Yellow flashing Series connection of two lights PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany phoenixcontact.com Description No supply voltage connected, or supply voltage connected but lamp switched off Light in standby mode, door position switch is active Lighting switches on when cabinet door is opened, switches back off when cabinet door is closed Light is on continuously 10 / 10