https://www.phoenixcontact.com/in/products/2702263
Safety module - AXL F SSDI8/4 1F - 2702263
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Safety-related digital input module, IP20 protection, for the SafetyBridge system. The module has 4 safe
digital inputs for two-channel assignment or 8 safe digital inputs for single-channel assignment.
Product Description
The safety module is an input module from the Axioline F product range for use in a SafetyBridge technology V3 system. The safety module can
®
be used as part of an Axioline F station at any point within an EtherCAT , EtherNet/IP™, Sercos, Modbus, PROFINET or PROFIBUS system.
The module has four safe digital inputs for two-channel assignment or eight safe digital inputs for single-channel assignment. Depending on the
installation and parameterization, in the SafetyBridge technology V3 system the safety module can achieve the following safety integrity:
- Up to SIL 3 according to standard EN 61508
- Up to SILCL 3 according to standard EN 62061
- Up to Cat. 4/PL e according to standard EN ISO 13849-1
Why buy this product
Cost-effective system configuration, as no safety PLC or safe fieldbus system is required
Flexible use, thanks to compatibility with all bus couplers from the Axioline F range
Reduced installation time, thanks to fast wiring and easy handling
Easy configuration using the free SAFECONF software
Up to SIL 3 according to EN 61508
Up to SILCL 3 according to EN 62061
Up to cat. 4/PL e according to EN ISO 13849-1
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4055626066813
Weight per Piece (excluding packing)
347.600 g
Custom tariff number
85389091
Country of origin
Germany
05/03/2018 Page 1 / 6
https://www.phoenixcontact.com/in/products/2702263
Safety module - AXL F SSDI8/4 1F - 2702263
Technical data
Dimensions
Width
53.6 mm
Height
126.1 mm
Depth
54 mm
Note on dimensions
Housing dimensions
Ambient conditions
Ambient temperature (operation)
-35 °C ... 60 °C (Mounting position: any)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
10 % ... 75 % (on average, 85% infrequently, non-condensing)
Permissible humidity (storage/transport)
10 % ... 75 % (non-condensing)
Air pressure (operation)
70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3500 m above sea level)
Degree of protection
IP20
Interfaces
Designation
Axioline F local bus (Note: not suitable for use in the Axioline F local bus
of the Phoenix Contact AXC 3050 controller)
No. of channels
1
Connection method
Bus base module
Digital inputs
Input name
Digital inputs
Description of the input
IEC 61131-2 type 3
Connection method
Push-in connection
Connection technology
2, 3, 4-wire
Number of inputs
4 (with two-channel assignment)
8 (for single-channel assignment)
Input filter time
1.5 ms
Input characteristic curve
IEC 61131-2 type 3
Input voltage
24 V DC (via clock outputs T1 and T2 or external supply)
Input voltage range
-3 V DC ... 30.2 V DC
Nominal input current at UIN
typ. 4.2 mA
Typical input current per channel
4.2 mA
General
Mounting type
DIN rail
Net weight
347.6 g
Note on weight specifications
with connectors and bus base module
Axioline potentials
Designation
Axioline F local bus supply (UBus)
Supply voltage
5 V DC (via bus base module)
05/03/2018 Page 2 / 6
https://www.phoenixcontact.com/in/products/2702263
Safety module - AXL F SSDI8/4 1F - 2702263
Technical data
Axioline potentials
typ. 280 mA (all inputs set; power supply by UI of 19.2 V DC to
30.2 V DC)
Current consumption
max. 310 mA
Designation
Supply for digital input modules (UI)
Supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30.2 V DC (including all tolerances, including ripple)
Current consumption
typ. 9 mA (all inputs set; power supply by UI with 30.2 V DC; without
power supply to the sensors via clock supplies T1 and T2)
Type of protection
Protection against polarity reversal, EMC protective circuit, undervoltage
detection
Safety-related characteristic data
Designation
IEC 61508 - High demand
Safety Integrity Level (SIL)
max. 3 (two channel; dependent in parameterization and wiring)
Designation
IEC 61508 - Low demand
Safety Integrity Level (SIL)
max. 3 (two channel; dependent in parameterization and wiring)
Designation
EN ISO 13849
Performance level (PL)
max. e (two channel; dependent in parameterization and wiring)
Category
max. 4 (two channel; dependent in parameterization and wiring)
Designation
EN 62061
Safety Integrity Level Claim Limit (SIL CL)
max. 3 (two channel; dependent in parameterization and wiring)
Standards and Regulations
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Dimensional drawing
126,1
54
122,4
53,6
05/03/2018 Page 3 / 6
https://www.phoenixcontact.com/in/products/2702263
Safety module - AXL F SSDI8/4 1F - 2702263
Classifications
eCl@ss
eCl@ss 5.1
27242604
eCl@ss 8.0
27242604
eCl@ss 9.0
27242604
ETIM
ETIM 5.0
EC001599
ETIM 6.0
EC001599
UNSPSC
UNSPSC 13.2
32151602
Approvals
Approvals
Approvals
UL Listed / cUL Listed / Functional Safety / Functional Safety / cULus Listed
Ex Approvals
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
Functional Safety
968/EZ 424.05/17
Functional Safety
968/EZ 424.05/17
05/03/2018 Page 4 / 6
https://www.phoenixcontact.com/in/products/2702263
Safety module - AXL F SSDI8/4 1F - 2702263
Approvals
cULus Listed
Accessories
Accessories
Device marking
Insert label - EMT (35X28)R - 0801602
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: snapped into
marker carrier, lettering field size: 35 x 28 mm
DIN rail connector
Bus connector - AXL F BS F - 2688129
Axioline F bus base module for housing type F
Terminal marking
Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579
Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling
with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER
Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580
Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual labeling with M-PEN 0,8, X-PEN, or CMSP1-PLOTTER
05/03/2018 Page 5 / 6
https://www.phoenixcontact.com/in/products/2702263
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
05/03/2018 Page 6 / 6