https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Managed Switch 2000, 8 RJ45 ports 10/100 Mbps, degree of protection IP20
Why buy this product
Suitable for PROFINET and EtherNet/IP™ networks
Unmanaged Mode
Configuration memory
RSTP
DHCP client, DHCP server (port-based)
VLANs
MRP client
Web-based management, SNMP
Slim design
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4055626128917
Weight per Piece (excluding packing)
323.000 g
Custom tariff number
85176200
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
45 mm
Height
130 mm
Depth
115 mm
09/07/2017 Page 1 / 7
https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Technical data
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
0 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Air pressure (operation)
86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport)
86 kPa ... 108 kPa (1500 m above sea level)
Interfaces
Interface 1
Ethernet (RJ45)
No. of ports
8 (RJ45 ports)
Connection method
RJ45
Note on connection method
Auto negotiation and autocrossing
Transmission physics
Copper
Transmission speed
10/100 Mbps
Transmission length
100 m (per segment)
Signal LEDs
Data receive, link status
Function
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Management
Web-based management (HTTP/HTTPS)
SNMPv1/v2/v3
Command-line interface (Telnet, SSH)
Diagnostic functions
RMON History
LLDP (Link Layer Discovery Protocol)
SNMP-Traps
N:1-Portmirroring
ACD (Address Conflict Detection)
Filter functions
Quality of Service (8 priority classes)
Port-Priorisierung
VLAN (up to 8 VLANs)
IGMP Snooping (32 groups)
IGMP Query
Auto-Query-Port
Extended Multicast Filtering
MAC address table
8k
Redundancy
MRP (Media Redundancy Protocol)
RSTP (Rapid Spanning Tree Protocol)
IP parameterization
DHCP-Client
DHCP server (port based)
BootP
PROFINET conformance class
Conformance-Class A
09/07/2017 Page 2 / 7
https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Technical data
Function
Status and diagnostic indicators
LEDs: US (power supply), 2 LEDs per Ethernet port (Link/Activity and
Speed)
Network expansion parameters
Cascading depth
Network, linear, and star structure: any
Maximum conductor length (twisted pair)
100 m
Supply voltage
Supply voltage
24 V DC (single)
Residual ripple
3.6 VPP (within the permitted voltage range)
Supply voltage range
18.5 V DC ... 30.5 V DC
Typical current consumption
180 mA (at US = 24 V DC)
Current consumption
180 mA
General
Mounting type
DIN rail
Type AX
Book type
Net weight
323 g
Housing material
Polycarbonate fiber reinforced
Note
Support by phone or on-site (fee is charged)
MTTF
507.8 Years (SN 29500 standard, temperature 25 °C, operating cycle 21
% (5 days a week, 8 hours a day))
246.55 Years (SN 29500 standard, temperature 40 °C, operating cycle
34.25 % (5 days a week, 12 hours a day))
56.66 Years (SN 29500 standard, temperature 55 °C, operating cycle
100 % (7 days a week, 24 hours a day))
Connection data
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
16
Stripping length
9 mm
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Developed in acc. with standard
IEC 61000-6.2
Test standard
IEC 61000-4-2 (ESD)
Test result
Criterion B
Test standard
EN 61000-4-3 (electromagnetic fields)
Test result
Criterion A
Test standard
IEC 61000-4-4 (burst)
09/07/2017 Page 3 / 7
https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Technical data
Standards and Regulations
Test result
Criterion A
Test standard
IEC 61000-4-5 (surge)
Test result
Criterion B
Test standard
IEC 61000-4-6 (immunity to conducted interference)
Test result
Criterion A
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Vibration (storage/transport)
2g, criterion 1 according to IEC 60068-2-6
Free from substances that could impair the application of coating
Yes
Vibration (operation)
2g, according to IEC 60068-2-6
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.0
27250501
eCl@ss 4.1
27250501
eCl@ss 5.0
27250501
eCl@ss 5.1
27250501
eCl@ss 6.0
27250501
eCl@ss 7.0
27250501
eCl@ss 8.0
19170106
eCl@ss 9.0
19170106
ETIM
ETIM 3.0
EC000734
ETIM 4.0
EC000734
ETIM 5.0
EC000734
ETIM 6.0
EC000734
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201410
UNSPSC 13.2
43222612
09/07/2017 Page 4 / 7
https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Approvals
Approvals
Approvals
UL Listed / cUL Listed / EAC / cULus Listed
Ex Approvals
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
EAC
RU CDE.A*30.B00767
cULus Listed
Accessories
Accessories
Assembly adapter
Adapter - FL DIN RA - 2891053
The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted
equipment to be rack mounted.
Drivers and interfaces
09/07/2017 Page 5 / 7
https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Accessories
Software - FL SNMP OPC SERVER V3 - 2701139
SNMP-OPC server, German and English, for monitoring and configuration of SNMP-capable equipment in HMI and
SCADA systems
End block
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
Network management software
Software - FL NETWORK MANAGER BASIC - 2702889
FL Network Manager, SNMP-based configuration and firmware update software, for easy startup of Managed
Switches
Software - FL VIEW 32 LITE - 2701744
FL VIEW, SNMP-based software in English, for the detection and display of Ethernet networks. 32 nodes (network
devices) can be monitored in one Class C subnetwork with this version.
Parameterization memory
Memory - SD FLASH 512MB - 2988146
Program and configuration memory, plug-in, 512 Mbyte.
09/07/2017 Page 6 / 7
https://www.phoenixcontact.com/gb/products/2702324
Industrial Ethernet Switch - FL SWITCH 2008 - 2702324
Accessories
Program / configuration memory - SD FLASH 2GB - 2988162
Program and configuration memory
Patch cable
Patch cable - FL CAT6 PATCH 1,0 - 2891385
Patch cable, CAT6, pre-assembled, 1.0 m
Protective cap
Dust protection - FL RJ45 PROTECT CAP - 2832991
Dust protection caps for RJ45 socket
Printed-circuit board connector - FK-MCP 1,5/ 5-ST-3,81 GY - 1884005
Plug component, nominal current: 8 A, rated voltage (III/2): 160 V, number of positions: 5, pitch: 3.81 mm, connection
method: Push-in spring connection, Color: gray, contact surface: Tin
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
09/07/2017 Page 7 / 7