2702364

https://www.phoenixcontact.com/us/products/2702364 Transformer terminal block - TRKSD 4 GY - 2702364 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Transformer terminal block, Connection method: Screw connection, Length: 32.9 mm, Width: 15 mm, Height: 19.2 mm, Color: gray, Mounting type: DIN rail, Coil snap-in device The illustration shows versions TRKS 4 and TRKDSD 4 in orange Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN Weight per Piece (excluding packing) 7.74 g Custom tariff number 85369010 Country of origin Greece Technical data General Note For transformers on ships, saltwater-proof DIN rails must be used according to the regulations of Germanic Lloyd. This requirement is fulfilled by all rail designs. When selecting the type of connection on safety transformers in acc. with IEC 742/EN 60742/DIN VDE 0551-1, please observe: - When safety transformers are used as self-contained devices, only screw connections are permitted for the external connections. - When installing safety transformers, the specifications of the respective devices must be observed. Number of connections 4 Color gray Insulating material PA Flammability rating according to UL 94 V2 05/15/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2702364 Transformer terminal block - TRKSD 4 GY - 2702364 Technical data General Rated surge voltage 8 kV Rated insulation voltage 690 V Degree of pollution 3 Overvoltage category III Connection in acc. with standard IEC / EN Nominal current IN 30 A Nominal voltage UN voltage data only possible in conjunction with transformer Number of positions 2 Dimensions Width 15 mm Length 32.9 mm Height 19.2 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Connection method Screw connection Stripping length 8 mm Internal cylindrical gage A4 05/15/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2702364 Transformer terminal block - TRKSD 4 GY - 2702364 Technical data Connection data Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC / EN Flammability rating according to UL 94 V2 Classifications eCl@ss eCl@ss 4.0 27141110 eCl@ss 4.1 27141110 eCl@ss 5.0 27141110 eCl@ss 5.1 27141110 eCl@ss 6.0 27141110 eCl@ss 7.0 27141110 eCl@ss 8.0 27141110 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC000398 ETIM 5.0 EC000398 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 05/15/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2702364 Transformer terminal block - TRKSD 4 GY - 2702364 Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details CSA    B C mm²/AWG/kcmil 24-10 24-10 Nominal current IN 27 A 27 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 30-10 30-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 30-10 30-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V UL Recognized  cUL Recognized  EAC  05/15/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2702364 Transformer terminal block - TRKSD 4 GY - 2702364 Approvals cULus Recognized  Drawings Dimensional drawing Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/15/2016   Page 5 / 5