2702382

PSR-MC82-5NO-1NC-1DO-24DC-SC - Extension module 2702382 https://www.phoenixcontact.com/us/products/2702382 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Contact extension up to SIL 3, Cat. 4, PL e in conjunction with suitable evaluation device, 5 enabling current paths, US = 24 V DC, plug-in screw terminal block Your advantages • Up to Cat. 4/PL e in accordance with ISO 13849-1, SIL 3 in accordance with EN IEC 62061 in conjunction with suitable evaluation device • Low housing width of just 17.5 mm • 1- and 2-channel control • 5 enabling current paths, 1 confirmation current path, 1 digital signal output • Automatic activation Commercial data Item number 2702382 Packing unit 1 pc Minimum order quantity 1 pc Sales key DN01 Product key DNA181 Catalog page Page 228 (C-6-2019) GTIN 4055626145471 Weight per piece (including packing) 220.77 g Weight per piece (excluding packing) 185.49 g Customs tariff number 85371098 Country of origin DE Jan 8, 2024, 8:58 AM Page 1 (11) PSR-MC82-5NO-1NC-1DO-24DC-SC - Extension module 2702382 https://www.phoenixcontact.com/us/products/2702382 Technical data Product properties Product type Safety relays Product family PSRmini Application Extension module Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 Times Typical response time < 50 ms (Monitored/manual and auto-start) Typ. starting time with Us < 50 ms (when controlled via A1/A2) Typical release time < 25 ms (when controlled via A1/A2) Recovery time < 100 ms Electrical properties Maximum power dissipation for nominal condition 15.2 W (at US = 30 V, IL² = 64 A²) Nominal operating mode 100% operating factor Air clearances and creepage distances between the power circuits Rated insulation voltage 250 V AC 250 V AC Rated surge voltage/insulation   Supply Designation A1/A2 Rated control circuit supply voltage US 19.2 V DC ... 30 V DC Rated control circuit supply voltage US 24 V DC -20 % / +25 % Rated control supply current IS typ. 80 mA Power consumption at US typ. 1.92 W Inrush current typ. 125 mA (Δt = 7 ms at Us) Filter time 4 ms (at A1 in the event of voltage dips at Us) max. 1 ms (at A1/A2, test pulse width, blanking pulses/dark test) 5 ms (at A1/A2, test pulse rate, blanking pulses/dark test) Where test pulse width