2702499

https://www.phoenixcontact.com/us/products/2702499 Inline terminal - IB IL RTD 4/PT100-ECO - 2702499 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline ECO, Temperature measurement terminal, Analog RTD inputs: 4 (Pt 100), Connection technology: 2-wire, Transmission speed in the local bus 500 kbps, Degree of protection IP20, including Inline connector Product Description The terminal is designed for use within an Inline station. It is used to acquire signals from resistive temperature sensors. The measured values are depicted in standardized representation format. Inline ECO terminals are approved for the temperature range from 0°C to +55°C. The electronics base and Inline connector are supplied as standard. Why buy this product  4 analog inputs  Connection of sensors in 2-wire technology  Supported sensors: Pt 100  Data format: standardized representation  Diagnostic information in the process data word  Diagnostic indicator Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626203195 Custom tariff number 85389091 Country of origin Germany Technical data Note 03/09/2017   Page 1 / 3 https://www.phoenixcontact.com/us/products/2702499 Inline terminal - IB IL RTD 4/PT100-ECO - 2702499 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.2 mm Height 119.8 mm Depth 71.5 mm Ambient conditions Ambient temperature (operation) 0 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 69 g Note on weight specifications with connector Diagnostics messages Failure of the internal I/O supply I/O error message sent to the bus coupler Checksum error I/O error message sent to the bus coupler Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kbps Inline potentials Communications power UL 7.5 V DC Current consumption from UL typ. 56 mA max. 85 mA I/O supply voltage UANA 24 V DC Current consumption from UANA typ. 7.3 mA max. 14 mA Power consumption typ. 0.67 W max. 0.97 W Analog inputs 03/09/2017   Page 2 / 3 https://www.phoenixcontact.com/us/products/2702499 Inline terminal - IB IL RTD 4/PT100-ECO - 2702499 Technical data Analog inputs Number of inputs 4 (Pt 100) Input name Analog RTD inputs Description of the input Input for resistive temperature sensors Connection method Inline connector Connection technology 2-wire Note regarding the connection technology Shielded Sensor types (RTD) that can be used Pt 100 (IEC 60751/EN 60751) Nominal value of the current sources 1 mA (pulsed current, the data is valid during the sampling phase) A/D conversion time typ. 120 ms Resolution A/D 24 bit Process data update < 10 ms Protective circuit Overload protection max. ±40 V DC, 1 min. Protective circuit/component max. ±40 V DC, 1 min. Data formats Standardized representation Input filter time 120 ms (per channel) Input filter Digital filter Electrical isolation Test section Bus logic (local bus, communications power) 500 V AC 50 Hz 1 min. Analog I/O 500 V AC 50 Hz 1 min. Functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 03/09/2017   Page 3 / 3