https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Inline ECO, Temperature measurement terminal, Analog UTH inputs: 4 (type J), Connection technology: 2-wire,
Transmission speed in the local bus 500 kbps, Degree of protection IP20, including Inline connector
Product Description
The terminal is designed for use within an Inline station.
This terminal can be used to acquire signals from standard thermocouples.
The terminal supports type J thermocouples according to DIN EN 60584-1.
The measured values are depicted in standardized representation format.
Inline ECO terminals are approved for the temperature range from 0°C to +55°C. The electronics base and Inline connector are supplied as standard.
Why buy this product
4 differential inputs for thermocouples
Measuring range: -210 °C ... +1200 °C
Connection of sensors in 2-wire technology
Diagnostic information in the process data word
Diagnostic indicator
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4055626206059
Weight per Piece (excluding packing)
80.000 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Note
04/13/2017 Page 1 / 7
https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
12.2 mm
Height
119.8 mm
Depth
71.5 mm
Ambient conditions
Ambient temperature (operation)
0 °C ... 55 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)
10 % ... 95 % (according to DIN EN 61131-2)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
General
Mounting type
DIN rail
Net weight
69 g
Note on weight specifications
with connector
Diagnostics messages
Failure of the internal I/O supply I/O error message sent to the bus coupler
Checksum error I/O error message sent to the bus coupler
Interfaces
Fieldbus system
Lokalbus
Designation
Inline local bus
Connection method
Inline data jumper
Transmission speed
500 kbps
Inline potentials
Communications power UL
7.5 V DC
Current consumption from UL
typ. 38 mA
max. 55 mA
I/O supply voltage UANA
24 V DC
Current consumption from UANA
typ. 32 mA
max. 39 mA
Power consumption
typ. 1.05 W (total)
max. 1.35 W (total)
Analog inputs
04/13/2017 Page 2 / 7
https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Technical data
Analog inputs
Number of inputs
4 (type J)
Input name
Analog UTH inputs
Description of the input
Differential inputs
Connection method
Inline connector
Connection technology
2-wire
Note regarding the connection technology
Shielded
Sensor types that can be used (TC)
J
Measuring principle
Sigma/Delta process
Measured value representation
16 bits (15 bits + sign bit)
A/D conversion time
typ. 120 ms
Resolution A/D
24 bit
Process data update
< 10 ms
Protective circuit
Transient protection of inputs
Electrical isolation
Test section
Bus logic (local bus, communications power) 500 V AC 50 Hz 1 min.
Analog I/O 500 V AC 50 Hz 1 min.
Functional earth ground 500 V AC 50 Hz 1 min.
Standards and Regulations
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Connection diagram
1.1
2.1
1.2
2.2
Dimensional drawing
119,8
2.3
1.4
2.4
71,5
1.3
Connecting the sensors
04/13/2017 Page 3 / 7
https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Classifications
eCl@ss
eCl@ss 4.0
27250303
eCl@ss 4.1
27250303
eCl@ss 5.0
27250303
eCl@ss 5.1
27242601
eCl@ss 6.0
27242601
eCl@ss 7.0
27242601
eCl@ss 8.0
27242601
eCl@ss 9.0
27242601
ETIM
ETIM 2.0
EC001431
ETIM 3.0
EC001596
ETIM 4.0
EC001596
ETIM 5.0
EC001596
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 13.2
32151602
Accessories
Accessories
Feed-through terminal block
Thermoelectric voltage terminal block pair - MTKD-FE/CUNI - 3100046
Thermoelectric voltage terminal block pair, USA type J, Connection method: Screw connection, Number of
connections: 2, Number of positions: 1, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Width: 10.4 mm, Color: gray,
Mounting type: NS 35/7,5, NS 35/15, NS 32
Installation terminal block
04/13/2017 Page 4 / 7
https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Accessories
Connection terminal block - AKG 4 GNYE - 0421029
Connection terminal block, Connection method Screw connection, Cross section: 0.5 mm² - 6 mm², Width: 7 mm,
Color: green-yellow
Connection terminal block - AKG 4 BK - 0421032
Connection terminal block, Connection method Screw connection, Cross section: 0.5 mm² - 6 mm², Width: 7 mm,
Color: black
Labeling panel
Labeling field - IB IL FIELD 2 - 2727501
Labeling field, width: 12.2 mm
Neutral conductor rail
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
PEN conductor busbar, 3mm x 10 mm, length: 1000 mm
Pick-off terminal block
04/13/2017 Page 5 / 7
https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Accessories
Connection terminal block - AK 4 - 0404017
Connection terminal block, Connection method Screw connection, Cross section: 0.5 mm² - 6 mm², Width: 7 mm,
Color: silver
Plug
Inline connector - IB IL SCN-8 - 2726337
Connector, for digital 1, 2 or 8-channel Inline terminals
Shield connection clamp
Shield connection terminal block - SK 8 - 3025163
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
Shield connection terminal block - SK 14 - 3025176
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
Shield connection terminal block - SK 20 - 3025189
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
04/13/2017 Page 6 / 7
https://www.phoenixcontact.com/us/products/2702502
Inline function terminal - IB IL UTH 4/J-ECO - 2702502
Accessories
Shield connection terminal block - SK 35 - 3026463
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
Support
Support bracket - AB-SK - 3025341
Support bracket for busbars
Support bracket - AB-SK 65 - 3026489
Support bracket, Bracket for busbars, set every 20 cm, Length: 95.5 mm, Width: 6.2 mm, Color: gray
Support bracket - AB-SK/E - 3026476
Support bracket, Bracket for busbars, set every 20 cm, Length: 10 mm, Width: 56 mm, Height: 20 mm, Color: silver
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
04/13/2017 Page 7 / 7
