2702534

https://www.phoenixcontact.com/gb/products/2702534 Wireless module - FL WLAN 1100 - 2702534 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) WLAN access point, client with two internal antennas (MIMO) for single-hole mounting, IP54, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz (incl. DFS channels), connections: COMBICON 18 ... 32 V DC, RJ45: for LAN, web, http/https, Command Line Interface Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626278919 Weight per Piece (excluding packing) 370.200 g Custom tariff number 85176200 Country of origin Germany Technical data Dimensions Width 62.8 mm Height 36.5 mm Depth 113.2 mm Note on dimensions Outside dimensions Ambient conditions Ambient temperature (operation) 0 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 800 hPa ... 1080 hPa (up to 2000 m above mean sea level) Air pressure (storage/transport) 660 hPa ... 1080 hPa (up to 3500 m above mean sea level) Degree of protection IP54 Note Degree of protection when installed Wireless interface 09/07/2017   Page 1 / 6 https://www.phoenixcontact.com/gb/products/2702534 Wireless module - FL WLAN 1100 - 2702534 Technical data Wireless interface Designation Wireless LAN Wireless standard IEEE 802.11 a b g n Antenna connection method (Internal) Frequency band 2.4 GHz 5 GHz Transmission power max. 20 dBm (EIRP) Number of wireless interfaces 1 IEEE 802. 11 a/b/g/n Wireless modules that can be connected 10 (In Access Point mode max. 2 SSIDs) Functions Operating modes Access Point / Client Adapter / Repeater Configuration Web-based management, automated CLI Quality of service (QoS) Yes Security 802.11i WPA PSK (preshared key) WPA2 AES TKIP MAC filter Wireless card Number 1 Type IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps Assembly instructions Permanently installed Antenna Assembly instructions Internal antenna Number 2 Connection method permanently installed Note on connection method MIMO Gain 5 dBi Ethernet interface Interface Ethernet (RJ45) Number of interfaces 1 Connection method RJ45 Note on connection method Auto negotiation and autocrossing Transmission speed 10/100 Mbps Transmission physics Copper 09/07/2017   Page 2 / 6 https://www.phoenixcontact.com/gb/products/2702534 Wireless module - FL WLAN 1100 - 2702534 Technical data Ethernet interface Transmission length 100 m (per segment) Power supply for module electronics Connection method Push-in spring connection Designation 1966101 FMC 1,5/ 3-STF-3,5 Number of positions 3 Cross section range AWG 24 ... 16 (Use copper wires rated 75° C (UL)) Note on connection method Recommended conductor cross section: 0.75 mm² Recommended ferrule: connection length 10 mm Recommended crimping pliers: trapezoidal or square Supply voltage 24 V DC (SELV) Supply voltage range 18 V DC ... 32 V DC (PELV/SELV) Supply current typ. 120 mA (at 24 V DC) Current consumption max. 250 mA (at 18 V DC) Connection data Designation 1966101 FMC 1,5/ 3-STF-3,5 Connection method Push-in spring connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 10 mm General Mounting type Single-hole mounting Net weight 370.2 g Degree of pollution 2 Note Degree of protection when installed Wireless licences Belgium Bulgaria Denmark Germany Estonia Finland France Greece Great Britain Ireland Italy 09/07/2017   Page 3 / 6 https://www.phoenixcontact.com/gb/products/2702534 Wireless module - FL WLAN 1100 - 2702534 Technical data General Latvia Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Austria Poland Portugal Romania Sweden Switzerland Slovakia Slovenia Spain Czech Republic Hungary Cyprus (rep.) Standards and Regulations Mechanical tests Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms half-sine shock pulse Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g, 10 ... 150 Hz Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g, 16 ms, 6000 shocks Broadband noise according to EN 60068-2-64 Category 1, Class A Standards/regulations EN 61000-4-2 Contact discharge ± 4 kV Indirect discharge ± 6 kV Standards/regulations EN 61000-4-3 Frequency range 80 MHz ... 1000 MHz Test field strength 10 V/m Frequency range 1000 MHz ... 6000 MHz Test field strength 3 V/m Standards/regulations EN 61000-4-4 Comments ± 2.2 kV Standards/regulations EN 61000-4-5 Signal ± 0.5 kV (symmetrical) ± 1 kV (asymmetrical) Standards/regulations EN 55022 09/07/2017   Page 4 / 6 https://www.phoenixcontact.com/gb/products/2702534 Wireless module - FL WLAN 1100 - 2702534 Technical data Standards and Regulations Test result Class B Standards/regulations EN 61000-4-6 Frequency range 0.15 MHz ... 80 MHz Voltage 10 V Classifications eCl@ss eCl@ss 4.0 24010504 eCl@ss 4.1 24010504 eCl@ss 5.0 19030112 eCl@ss 5.1 19030112 eCl@ss 6.0 19170201 eCl@ss 7.0 19170201 eCl@ss 8.0 19170201 eCl@ss 9.0 19170201 ETIM ETIM 3.0 EC000817 ETIM 4.0 EC000816 ETIM 5.0 EC000816 ETIM 6.0 EC000816 UNSPSC UNSPSC 6.01 43172710 UNSPSC 7.0901 43223108 UNSPSC 11 43172710 UNSPSC 12.01 43223108 UNSPSC 13.2 43223108 Accessories Accessories Adapter Adapter - FL M32 ADAPTER - 2702544 Accessories for FL-WLAN 1100 series: Optional cable feed-through for sealing (IP67) the FL-WLAN 110x connection (IP20), if the device is not directly integrated onto the closed housing. Not needed when mounting on a control cabinet, etc.     09/07/2017   Page 5 / 6 https://www.phoenixcontact.com/gb/products/2702534 Wireless module - FL WLAN 1100 - 2702534 Accessories Data plug RJ45 connector - CUC-IND-C1ZNI-S/R4IE8 - 1421607 RJ45 connector, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), material: Zinc die-cast, connection method: IDC fast connection, connection cross section: AWG 26-24, cable outlet: straight     Patch cable Patch cable - FL CAT5 PATCH 1,5 - 2832221 Patch cable, CAT5, assembled, 1.5 m     PCB plug Printed-circuit board connector - FMC 1,5/ 3-STF-3,5 - 1966101 Plug component, nominal current: 8 A, rated voltage (III/2): 160 V, number of positions: 3, pitch: 3.5 mm, connection method: Push-in spring connection, Color: green, contact surface: Tin     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 09/07/2017   Page 6 / 6