2702553

https://www.phoenixcontact.com/us/products/2702553 Antenna - FL LCX CABLE 24 E - 2702553 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) The leaky wave conductor is a "wireless cable" which acts as an antenna and radiates over the entire length. The range is limited here. Track-guided systems can thus be properly supplied even under complex conditions. Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 1.000 g Custom tariff number 85442000 Country of origin Belgium Technical data Dimensions Diameter 15.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -70 °C ... 85 °C General With connecting cable yes Frequency range 2.4 GHz Cable resistance 1.48 Ω/km (DC inner conductor) 2.8 Ω/km (DC phase conductor) Gain 0 dBi Connection method open end Cable weight 232.00 g/m Smallest bending radius, fixed installation min. 200 mm (One-time bending) Cable, attenuation 14.7 dB/100 m, longitudinal attenuation (2.4 GHz) 09/02/2016   Page 1 / 3 https://www.phoenixcontact.com/us/products/2702553 Antenna - FL LCX CABLE 24 E - 2702553 Technical data General 60 dB, coupling attenuation 95 % (2.4 GHz) Material Al Cu wire (inner conductors) Copper film (Phase conductors) PE foam (Insulation) Assembly instructions Recommended clamp distance 0.5 m Mounting type Wall mounting Classifications eCl@ss eCl@ss 4.0 240604xx eCl@ss 4.1 24060401 eCl@ss 5.0 27061804 eCl@ss 5.1 27061804 eCl@ss 6.0 27061804 eCl@ss 7.0 19070105 eCl@ss 8.0 19070105 eCl@ss 9.0 19070105 ETIM ETIM 3.0 EC001698 ETIM 4.0 EC000416 ETIM 5.0 EC001698 UNSPSC UNSPSC 6.01 20142601 UNSPSC 7.0901 20142601 UNSPSC 11 20142601 UNSPSC 12.01 20142601 UNSPSC 13.2 20142601 Accessories Accessories Assembly tool 09/02/2016   Page 2 / 3 https://www.phoenixcontact.com/us/products/2702553 Antenna - FL LCX CABLE 24 E - 2702553 Accessories Alignment tool - FL LCX TOOL E - 2702519 Special alignment tool for the accurate mounting of connectors on the leaky wave conductors.     Coaxial adapter Connector - FL LCX CON-N-F E - 2702518 The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable.     Mounting material Cable tie - FL LCX CLAMP E - 2702520 Mounting clamp for fastening the FL LCX CABLE METER leaky wave conductor.     Terminal resistor Termination resistor - FL LCX 50-OHM - 2884978 A termination resistor must be screwed on at the end of the leaky wave conductor which does not contain any wireless part. It guarantees an antenna cable termination with the correct impedance and is important for every wireless installation.     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/02/2016   Page 3 / 3