2702652

https://www.phoenixcontact.com/us/products/2702652 Industrial Ethernet Switch - FL SWITCH 2308 - 2702652 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Managed Switch 2000, 8 RJ45 ports 10/100/1000 Mbps, Degree of protection IP20 Why buy this product  Unmanaged Mode  Configuration memory  RSTP  DHCP client, DHCP server (pool-based and port-based), DHCP option 82  VLANs  MRP (client and master)  Web-based management, SNMP  Slim design  -40°C ... +70°C ambient temperature Key Commercial Data Packing unit 1 GTIN GTIN 4055626259987 Technical data Dimensions Width 45 mm Height 130 mm Depth 115 mm Ambient conditions 04/10/2017   Page 1 / 5 https://www.phoenixcontact.com/us/products/2702652 Industrial Ethernet Switch - FL SWITCH 2308 - 2702652 Technical data Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Air pressure (operation) 53 kPa ... 108 kPa (5000 m above sea level) Air pressure (storage/transport) 53 kPa ... 108 kPa (5000 m above sea level) Interfaces Interface 1 Ethernet (RJ45) No. of ports 8 (RJ45 ports) Connection method RJ45 Note on connection method Auto negotiation and autocrossing Transmission physics Copper Transmission speed 10/100/1000 Mbps Transmission length 100 m (per segment) Signal LEDs Data receive, link status Function Basic functions Store-and-forward switch, complies with IEEE 802.3 Management Web-based management (HTTP/HTTPS) SNMPv1/v2/v3 Command-line interface (Telnet, SSH) Diagnostic functions RMON History LLDP (Link Layer Discovery Protocol) SNMP-Traps N:1-Portmirroring ACD (Address Conflict Detection) Filter functions Quality of Service (4 priority classes) Port-Priorisierung VLAN (up to 32 VLANs) IGMP Snooping (32 groups) IGMP Query Auto-Query-Port Extended Multicast Filtering MAC address table 8k Redundancy MRP (Media Redundancy Protocol) RSTP (Rapid Spanning Tree Protocol) 04/10/2017   Page 2 / 5 https://www.phoenixcontact.com/us/products/2702652 Industrial Ethernet Switch - FL SWITCH 2308 - 2702652 Technical data Function FRD (Fast Ring Detection) Large Tree Support IP parameterization DHCP-Client DHCP Option 82 (Relay Agent) DHCP server (pool-based, port-based) BootP PROFINET IO conformance class Conformance-Class A Status and diagnostic indicators LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed) Signal contact control voltage 24 V DC (typical) Signal contact control current 200 mA (1 minute, maximum) Network expansion parameters Cascading depth Network, linear, and star structure: any Maximum conductor length (twisted pair) 100 m Supply voltage Supply voltage 24 V DC (redundant) Residual ripple 3.6 VPP (within the permitted voltage range) Supply voltage range 12 V DC ... 57 V DC Typical current consumption 280 mA (at US = 24 V DC) Current consumption 280 mA General Mounting type DIN rail Type AX Book type Net weight 0g Housing material Polycarbonate fiber reinforced Connection data Connection method Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 Stripping length 9 mm Standards and Regulations 04/10/2017   Page 3 / 5 https://www.phoenixcontact.com/us/products/2702652 Industrial Ethernet Switch - FL SWITCH 2308 - 2702652 Technical data Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Developed in acc. with standard IEC 61000-6.2 Test standard IEC 61000-4-2 (ESD) Test result Criterion B Test standard EN 61000-4-3 (electromagnetic fields) Test result Criterion A Test standard IEC 61000-4-4 (burst) Test result Criterion A Test standard IEC 61000-4-5 (surge) Test result Criterion A Test standard IEC 61000-4-6 (immunity to conducted interference) Test result Criterion A Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Vibration (storage/transport) 5g, 150 Hz, in acc. with IEC 60068-2-6 Free from substances that could impair the application of coating Yes Vibration (operation) In acc. with IEC 60068-2-6: 5g, 150 Hz ATEX  II 3G Ex nA IIC T4 Gc IECEx Ex nA IIC T4 Gc Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Approvals Approvals Approvals ABS / EAC Ex Approvals Approval details ABS   http://www.eagle.org/eagleExternalPortalWEB/  17-HG1592765-PDA 04/10/2017   Page 4 / 5 https://www.phoenixcontact.com/us/products/2702652 Industrial Ethernet Switch - FL SWITCH 2308 - 2702652 Approvals EAC      RU CDE.A*30.B00767 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/10/2017   Page 5 / 5