2702792

https://www.phoenixcontact.com/us/products/2702792 Inline terminal - IB IL 24 DI 8/HD-ECO - 2702792 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline ECO, Digital input terminal, Digital inputs: 8, 24 V DC, Connection technology: 1-wire, Transmission speed in the local bus 500 kbps, Degree of protection IP20, including Inline connector Product Description The terminal is designed for use within an Inline station. It is used to acquire digital signals. Inline ECO terminals are approved for the temperature range from 0°C to +55°C. The electronics base and Inline connector are supplied as standard. Why buy this product  8 digital inputs  Connection of sensors in single-wire technology  Diagnostic and status indicators Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626355221 Weight per Piece (excluding packing) 40.000 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 04/13/2017   Page 1 / 6 https://www.phoenixcontact.com/us/products/2702792 Inline terminal - IB IL 24 DI 8/HD-ECO - 2702792 Technical data Dimensions Width 12.2 mm Height 119.8 mm Depth 71.5 mm Ambient conditions Ambient temperature (operation) 0 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Inline connector Connection method Spring-cage connection Conductor cross section solid min. 0.08 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.08 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Net weight 83.38 g Note on weight specifications with connector Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kbps Power supply for module electronics Connection method Spring-cage connection Communications power UL 7.5 V Current consumption max. 30 mA (from the local bus) Power consumption max. 0.25 W (at UL) 04/13/2017   Page 2 / 6 https://www.phoenixcontact.com/us/products/2702792 Inline terminal - IB IL 24 DI 8/HD-ECO - 2702792 Technical data Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 30 mA DC Segment circuit supply US 24 V DC (nominal value) Current consumption from US max. 5.5 mA DC Power consumption max. 0.25 W (at UL) Digital inputs Input name Digital inputs Description of the input EN 61131-2 types 1 and 3 Connection method Spring-cage connection Connection technology 1-wire Number of inputs 8 Typical response time 1 ms Input voltage 24 V DC Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 11 V DC ... 30 V DC Nominal input current at UIN typ. 2.4 mA Typical input current per channel 2.4 mA Delay at signal change from 0 to 1 1 ms Delay at signal change from 1 to 0 1 ms Electrical isolation Test section 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics) / functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Protection class III, IEC 61140, EN 61140, VDE 0140-1 Drawings 04/13/2017   Page 3 / 6 https://www.phoenixcontact.com/us/products/2702792 Inline terminal - IB IL 24 DI 8/HD-ECO - 2702792 Connection diagram 1.1 2.1 1.2 2.2 1.3 2.3 Local bus IN2 IN1 +24 V OPC UL+ UANA UL- +24 V 1.4 IN7 +24 V Block diagram 2.4 8 IN8 16 8 +24 V 4x 4x +24 V +24 V (US) +24 V (UM) Internal wiring of the terminal points Dimensional drawing 71,5 119,8 Classifications eCl@ss eCl@ss 5.1 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 5.0 EC001599 04/13/2017   Page 4 / 6 https://www.phoenixcontact.com/us/products/2702792 Inline terminal - IB IL 24 DI 8/HD-ECO - 2702792 Accessories Accessories Front adapter Front adapters - FLKM 14-PA-INLINE/DIO8 - 2900889 VARIOFACE front adapter for Inline HD modules, for transferring 8 digital signals.     I/O component Inline terminal - IB IL PD 24V-PAC - 2862987 Inline terminal for power distribution (24 V), complete with accessories, (connector and labeling field) 24 V supply voltage is fed out from the segment circuit (US)     Inline terminal - IB IL PD GND-PAC - 2862990 Inline terminal for power distribution (GND), complete with accessories, (connector and labeling field) connections for GND     Labeling panel Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Plug 04/13/2017   Page 5 / 6 https://www.phoenixcontact.com/us/products/2702792 Inline terminal - IB IL 24 DI 8/HD-ECO - 2702792 Accessories Inline connector - IB IL SCN-8 - 2726337 Connector, for digital 1, 2 or 8-channel Inline terminals     Terminal marking Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, Mounting type: Insert, Lettering field: 62 x 10 mm     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/13/2017   Page 6 / 6