2708119

Extract from the online catalog     SUBCON-PLUS-CAN/PG Order No.: 2708119 Similar figure http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2708119   D-SUB connector, 9-pos. female connector, cable entry < 35°, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, with PG D-SUB female connector for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 6, 7, 9; screw terminal blocks   Product notes WEEE/RoHS-compliant since: 07/27/2006 Commercial data GTIN (EAN) 4 046356 041331 sales group H631 Pack 1 pcs. Customs tariff 85366990 Catalog page information Page 553 (IF-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data General data Nominal voltage UN 60 V AC/DC Nominal current IN 1A PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 4 Feb 9, 2011 SUBCON-PLUS-CAN/PG Order No.: 2708119 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2708119 Bus system CAN, CANopen, SafetyBus-P Insertion/withdrawal cycles > 200 Max. cable diameter 8.4 mm Min. cable diameter 7.6 mm SUBCON fixing screws 4-40 UNC Tightening torque 0.4 Nm Ambient temperature (operation) -20 °C ... 75 °C Housing material ABS, metal-plated Pin assignment 2, 3, 6, 7, 9 Width 16.6 mm Height 39.4 mm Length 58 mm Connection data Connection D-SUB connection Number of positions 9 Type of connection D-SUB socket Termination resistor 120 Ω (Can be connected externally) Connection PCB connection Type of connection Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 1 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 16 Stripping length 5 mm Tightening torque 0.4 Nm Connection Programming connection Number of positions 9 Type of connection D-SUB connector Certificates / Approvals PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 4 Feb 9, 2011 SUBCON-PLUS-CAN/PG Order No.: 2708119 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2708119 Certification CUL, UL Accessories Item Designation Description SZK PH1 VDE Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip 1204384 QUICK WIREFOX 6 Stripping tool for cables with PVC insulation, stripping range: 0.08 to 6 mm², wire cutting up to 6 mm² flexible or 4 mm² rigid 1204504 SZF 0-0,4X2,5 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2-component grip, with non-slip grip General 1205150 Tools Diagrams/Drawings Dimensioned drawing PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 4 Feb 9, 2011 SUBCON-PLUS-CAN/PG Order No.: 2708119 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2708119 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2011 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 4 Feb 9, 2011