https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Installation level terminal block, Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Width: 6.2
mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Product Features
The other types in the PIK range support all other circuit versions encountered in practice
For example, combining the PIK 4-PE/L/NT and the PIK 4-L/L enables a three-phase circuit to be wired on a design width of 12.4 mm. This
represents a space saving of 18.6 mm compared to conventional wiring with single-level installation terminal blocks.
Key commercial data
Packing unit
1 PCE
GTIN
Weight per Piece (excluding packing)
14.83 GRM
Custom tariff number
85369010
Country of origin
Greece
Technical data
General
Number of levels
2
Number of connections
4
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V2
Maximum load current
32 A (with 4 mm² conductor cross section)
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
12/4/13 Page 1 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Technical data
General
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
32 A
Nominal voltage UN
400 V
Open side panel
ja
Dimensions
Width
6.2 mm
Length
88 mm
Height NS 35/7,5
51.5 mm
Height NS 35/15
59 mm
Connection data
Note
Terminal point
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
4 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
12
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, max.
Connection method
Screw connection
Stripping length
9 mm
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
12/4/13 Page 2 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141118
eCl@ss 6.0
27141125
eCl@ss 7.0
27141125
eCl@ss 8.0
27141125
ETIM
ETIM 2.0
EC001329
ETIM 3.0
EC001329
ETIM 4.0
EC001329
ETIM 5.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / GOST / DNV / GOST / cULus Recognized
Ex Approvals
Approvals submitted
Approval details
12/4/13 Page 3 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Approvals
UL Recognized
B
mm²/AWG/kcmil
28-12
28-12
Nominal current IN
20 A
20 A
Nominal voltage UN
250 V
300 V
B
mm²/AWG/kcmil
28-12
28-12
Nominal current IN
20 A
20 A
Nominal voltage UN
250 V
300 V
C
cUL Recognized
C
GOST
DNV
GOST
cULus Recognized
Accessories
Accessories
Bridge
12/4/13 Page 4 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, Number of positions: 100, Color: silver
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, Number of positions: 10, Color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, Number of positions: 20, Color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
12/4/13 Page 5 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-PIK 4 - 2714080
End cover, Length: 88 mm, Width: 1.5 mm, Color: gray
Insulating sleeve
Bridge bar isolator - IS-K 4 - 1302338
Bridge bar isolator, Color: gray
12/4/13 Page 6 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
Bridge bar isolator - ISSBI 10- 6 - 0301505
Bridge bar isolator, Number of positions: 10, Color: silver
Labeled terminal marker
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker pen
12/4/13 Page 7 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Mounting rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
12/4/13 Page 8 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
12/4/13 Page 9 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
12/4/13 Page 10 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
12/4/13 Page 11 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Accessories
Partition plate - ATP-PIK - 2714145
Partition plate, Length: 95 mm, Width: 1.5 mm, Height: 57 mm, Color: gray
Terminal marking
Marker cards - SBS 6:UNBEDRUCKT - 1007222
Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2
mm, Lettering field: 5.6 x 10.5 mm
12/4/13 Page 12 / 13
https://www.phoenixcontact.com/us/products/2714048
Installation level terminal block - PIK 4-L - 2714048
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
12/4/13 Page 13 / 13
