https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Installation level terminal block, Screw connection, Cross section: 0.2 mm² - 10 mm², AWG: 24 - 8, Width: 8.2
mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Product Features
Same shape as PIK 4 terminal blocks
Key commercial data
Packing unit
1 PCE
Weight per Piece (excluding packing)
37.29 GRM
Custom tariff number
85369010
Country of origin
Greece
Technical data
General
Note
Assembly instructions:
For secure fastening of the neutral busbar, supports must be set at the
beginning and end of each terminal strip as well as every 20 cm on longer
terminal strips.
Number of levels
3
Number of connections
5
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V0
Maximum load current
41 A (with 6 mm² conductor cross section)
Current carrying capacity of the neutral busbar
140 A
Rated surge voltage
4 kV
Pollution degree
3
Surge voltage category
III
12/4/13 Page 1 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Technical data
General
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1 / IEC 60947-7-2
Nominal current IN
41 A
Nominal voltage UN
400 V (phase conductor/phase conductor)
250 V (phase conductor/PE)
250 V (phase conductor/N)
Open side panel
nein
Dimensions
Width
8.2 mm
Length
88 mm
Height NS 35/7,5
51.5 mm
Height NS 35/15
59 mm
Connection data
Note
Terminal point
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
6 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
8
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
Connection method
Screw connection
Stripping length
9 mm
12/4/13 Page 2 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Technical data
Connection data
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141118
eCl@ss 6.0
27141125
eCl@ss 7.0
27141125
eCl@ss 8.0
27141125
ETIM
ETIM 2.0
EC001329
ETIM 3.0
EC001329
ETIM 4.0
EC001329
ETIM 5.0
EC001329
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / GOST / GOST / cULus Recognized
Ex Approvals
12/4/13 Page 3 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Approvals
Approvals submitted
Approval details
UL Recognized
mm²/AWG/kcmil
26-8
Nominal current IN
30 A
Nominal voltage UN
300 V
cUL Recognized
mm²/AWG/kcmil
26-8
Nominal current IN
30 A
Nominal voltage UN
300 V
GOST
GOST
cULus Recognized
Accessories
Accessories
Bridge
12/4/13 Page 4 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
Fixed bridge - FBRI 10-8 N - 2772080
Fixed bridge, Number of positions: 10, Color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
12/4/13 Page 5 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
12/4/13 Page 6 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
Mounting rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
12/4/13 Page 7 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
12/4/13 Page 8 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
12/4/13 Page 9 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Neutral conductor rail
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
PEN conductor busbar, 3mm x 10 mm, length: 1000 mm
12/4/13 Page 10 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
Partition plate
Partition plate - ATP-PIK - 2714145
Partition plate, Length: 95 mm, Width: 1.5 mm, Height: 57 mm, Color: gray
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Support
Support bracket - AB-UTI/3 - 3076038
Support bracket, Bracket for busbars, set every 20 cm, Length: 93.5 mm, Width: 2.2 mm, Height: 51.2 mm, Color: blue
Terminal marking
Marker cards - SBS 8:UNBEDRUCKT - 1007235
Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, For terminal block width: 8.2 mm, Lettering field: 6 x 8.1 mm
12/4/13 Page 11 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Accessories
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 8.2
mm, Lettering field: 7.6 x 10.5 mm
Additional products
Connection terminal block - AKG 16 BU - 0423014
Connection terminal block, Connection method Screw connection, Load current : 76 A, Cross section: 1.5 mm² - 16 mm²,
Width: 9.8 mm, Color: blue
Connection terminal block - AKG 35 BU - 0424013
Connection terminal block, Connection method Screw connection, Load current : 125 A, Cross section: 2.5 mm² - 35
mm², Width: 14.3 mm, Color: blue
12/4/13 Page 12 / 13
https://www.phoenixcontact.com/us/products/2714268
Installation level terminal block - PIK 6-PE/L/NT - 2714268
Drawings
Circuit diagram
Circuit diagram
1 = cover
2 = fixed bridge
3 = N connection terminal block
4 = partition plate
5 = N busbar
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
12/4/13 Page 13 / 13
